Pvc, Xlpe Insulation Power Cable

PVC Sheathed armoured power cable
The product not only has good electric capability, but also has good chemical stabilization, simple structure, easy to use, and the laying of cable do not be limited by the fall.
It is widely used at the transformer circuit which rated voltage is 6000V or under.
The product is produced against IEC60502 and IEC60331, and the product can be produced against the standard of BS, DIN, and the standard required by the clients.

1. The long-term permissible operation temperature of the conductor shall not be higher than 70.
2. The max temperature of the conductor of cable should less then 160 when short circuit. (less then 5 second).
3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0.
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardance.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently.
6. Rated voltage: 0.6/1kV, 3.6/6kV.
7. Number of cores: One, two, three, four, five.


Drum

Application :-
The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power
in power plants, industries, projects and all other electrical installations.

Features :-
Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated
with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer
sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement.

Technical Advantage of XLPE Insulation :-
Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher
insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge
currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher
cable operating temperature 90�°C and short circuit temperature 250�°C.

Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +90�°C
Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3
Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores.
Color Codes : 2 Core Cables - Red, Black
3 Core Cables - Red, Yellow & Blue
3 Core Cables - Red, Yellow, Blue & Black (for Neutral)
4 Core Cables - Red, Yellow, Blue & Black
5 Core Cables - Red, Yellow, Blue, Black & Grey
6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction

in each lay Black outer sheath

Specification : IS:7098 (Part-1)
Packing : 500 / 1000 meters on drums

1. Standard of XLPE Cable: According to GB12706( Equal to IEC60502)Also can do by standard of ASTM,BS,DIN and AS/NZS or other standards as request.



2. Rated Voltage of XLPE Cable:

0.6/1KV 6/10KV;8.7/15KV;12/20KV;18/20KV;21/35KV;6/35KV



3. Construction of XLPE Cable:

Conductor:Copper or Aluminum

Insulation:XLPE

Inner sheath:PVC or PE

Armoured:Galvanized steel tape,Galvanized steel wire

Outer Sheath:PVC or PE

NO. of cable cross: 1 core(Single core),2cores(Double cores),3cores, 4cores(4 equal-section-area cores OR 3 equal-section-area+1 small section area neutral core),5cores(5 3 equal-section-area cores+2 small area neutral cores OR 4 equal-section-area +1 small area neutral cores).We provide armored type and non-armored type for the cables stated above.

Also can do according to the customer's request.



4. Characters of XLPE Cable:

a.Max Long-time operating temperature of XLPE insulated cable is 90°C

b.Installing temperature of cable should not be less than 0°C

c.Max short-circuit temperature is not exceed 250°C,Not more than5 Sec.

d.Unable be laid without the limit of fall with enough mechanical pull,Single core cable can not be laid in iron tube or fixed by circled iron tools around cables



5. Description & Application of XLPE Cable:



TYPE

NAME

Main Application

CU core

AL core





YJV/YJY

YJLV/YJLY

XLPE insulated,PVC/PE sheathed power cable

For laying indoor ,tunnel,canal and underground.Unable to bear external mechanical forces,but bear the traction force during laid

YJV22/YJV23

YJLV22/YJLV23

XLPE insulated,steel tape armored,PVC/PE sheathed power cable

For laying indoor ,tunnel,canal and underground.Able to bear external mechanical forces,but unable to bear large pulling force

YJV32/YJV33

YJLV32/YJLV33

XLPE insulated,thin steel wire armored,PVC/PE sheathed power cable

For laying in shaft,water underground will large difference of level.Able to bear external mechanical forces and moderate pulling force

YJV42/YJV43

YJLV42/YJLV43

XLPE insulated,thick steel wire armored,PVC/PE sheathed power cable

For laying in water and seabed.Able to bear positive pressure and pulling force



6. Advantage:

a. Excellent electric and mechanical characteristics

b. Best Resistance chemical corrosion and heat-ageing,environment stress and flame-retardant

c. Simple in structure,Convenient to use

d. Reduce costs

Application :-
The Power Cables are used under ground as well as over head transmission of power in power plants, industries,
projects and all other electrical installations.

Features :-
Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated
with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner &
outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement.

Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC
Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core.
Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores.
Color Codes : 2 Core Cables - Red, Black
3 Core Cables - Red, Yellow & Blue
3 Core Cables - Red, Yellow, Blue & Black (for Neutral)
4 Core Cables - Red, Yellow, Blue & Black
5 Core Cables - Red, Yellow, Blue, Black & Grey
6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction

in each lay Black outer sheath

Specification : IS:1554 (Part-1)
Packing : 500 / 1000 meters on drums

33kV XLPE Insulation DSTA PVC Sheath Power Cable

1.Range of Application
This product is fit A.C rated voltage 450/750V
2.Service Conditions
BV-105model not more than 105oC.Others not more than 75oC installation temperature not lower than 0oC.

11KV 3c 240mm2 XLPE Insulation DSTA PVC Sheathed Power cable