Fire Retardant Busbar Trunking

FRP cable trays at INDO are manufactured from Glass Armored Thermoset fireretardant
resins Available in different range applied for ideal locations where metallic systems get
easily corroded
INDO FRP Cable Tray system meet stringent Fire Retardant requirements It provides
advantages like Anti Corrosion High Strength No Earthing UV Resistant Good
Electrical Insulator Low thermal conductivity etc

Features:
1 Current range: 100A¡ª5000A
2 Working voltage: 400V
3 Protection degree: IP42
4 Low voltage drop
5 High dynamic stability
6 Comply with GB7251-97 and IEC439.2.

Description:
A new type of busway designed and developed on the basis of traditional cable mainly used in low-rise building and multi-layer factory etc. Comply to GB7251-97 and IEC439.2.
Note: safety factor is lower than air insulation type and has no moisture-proof feature. And its life-span is short.

Plywood case.

Features:
1 Current:300A---6000A
2 Protection degree:IP54
3 sandwich-type compact structure design
4 Low impedance
5 Low voltage drop
6 High dynamo thermal stability.

Description:
The reasonable sandwich-type compact type structure design keeps for a total length and increases system dynamo thermal stability which makes busway have the low impedance and low voltage drop features.
Note: It is strictly prohibited that there is water enter enclosure and conductor after installation, thus anti-water hydrant have to be added on the well-hole.
PE grounding conductor is extremely important for safety if big current is required. Both economic enclosure earthing configuration and dedicated PE conductor is available for customer. But the section surface of PE grounding system have to exceed 50% that of phase conductor.
CCX-II busway adopts complete closed structure with max protection degree IP54. 100% metal enclosure can be used as shortest and reliable grounding system to guarantee operation safety. Vertical installation is first choice for straight busway but horizontal installation is available according to requirements.
The standard length of every section busway 6m.

Reasonable design of connector makes both side outline and top outline available. Inner extensive ball cushion inside sides board makes it have average pressure and anti-vibration features. Same specification connectors can be exchanged, which make it easy and quick for installation and disassemble.
Adopt steel high-strength bolt and the recommended torque value is 80-108N.m
Adopt single bolt design make it easy and quick for installation
Professional anti-over turn design can avoid incorrect phase connection.
Expansion design can eliminate linear expansion without effect electric conductivity and mechanical strength.
Special double-bolt design makes it easy to tight connector without wrench.

Plywooden case.

POWER CABLES
Fire Resistant & Flame Retardant Cables

Please contact us for for details catalogue

This cable will produce very little smoke and innocuous gas without halogen when burnt, it could definitely reduce the damage to the instrument, equipment and people. It was widely used in the crowded public place, such as high-rise building, hospital, library, gym, station, and mall.
The plastic insulated cables (rated voltage: 35kV) produced by Qinshan Company, completely comply with GB/12706:2002, GB5023:1997 and GB9330:88, DJ08-93:2002; meanwhile, our flame retardant, low smoke and zero halogen cables comply with GB/T17650-1~2:1998, GB/T17651-1~2:1998, burning in the environment of 800 degrees Celsius or lower, ensure the conductor working at least 180 minutes, itâ??s twice of of the regular fire resistant cables.
Models:
WDZN-YJE: Copper core, XLPE insulated,Polyolefin sheathed Zero Halogen Low smoke Flame retardant Fire resistant power cable
WDZN-YJE22: Copper core, XLPE insulated, Steel tape armoured, Polyolefin sheathed Zero Halogen Low smoke Flame retardant Fire resistant power cable
WDZN-YJE32: Copper core, XLPE insulated, Fine steel wire armoured,Polyolefin sheathed Zero Halogen Low smoke Flame retardant Fire resistant power cable
A. Single core - Nominal cross section area of conductor 2.5~630mm2
B. Cores: 2,3,4,5,3+1,3+2,4+1 - Nominal cross section area of conductor 4~300mm2

VOLTAGE:300/500V, 450/750V, 600/1000V
CAPACITY:2000km/month
Conductor:Class 1 solid or class 2 stranded copper conductor
Separator:Mica/glass fire barrier tape
Insulation:LSZH (Low Smoke Zero Halogen) or XLPE
Protective Conductor:Tinned copper, full size CPC
Bedding:LSZH (Low Smoke Zero Halogen)
Screen:AL/PET (Aluminum/Polyester Tape)
Armour:SWA (Steel Wire Armor), STA (Steel Tape Armor)
Sheath:LSZH (Low Smoke Zero Halogen) or HOFR (Heat and Oil Resistant and Flame Retardant) to BS7655 or Heat resistant XLPE
Sheath Color:Red, white, black

Application :-
This is a premium product of electrical wires from \'JPCL\'. These cables are ideal for wiring in residential and
commercial complexes, high-rise buildings, hotels, hospitals, schools, colleges, etc. (where the density of people is
high). During a fire, these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of
fire enabling those trapped inside to escape safely.

Features :-
Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor
resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and
manufactured in-house only. The insulation is far superior in terms of critical oxygen and temperature index as well as in
light transmission and acid gas generation. The skin coloration offers high insulation resistance and long life.

Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +70�°C
Sizes : 0.75, 1.00, 1.50, 2.50, 4.00 and 6.00 Sq. mm
Color Codes : Red, Yellow, Blue, Black and Green (For Earthing)
Specification : IS:694
Packing : In 90 meter coils in attractive cartons

SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents.
It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line.


SFEX Solution : SFEX CT Manteau / SFEX AP Tape
1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray
Installation and How It Works
1. Cover the SFEX CT Manteau.


2. Prevent the spread of fire with extinguishing/flame retardance properties


2. Vertical Section Fire
Installation and How It Works
1. Wind the SFEX AP Tape on the cable.


2. Prevent the spread of fire with extinguishing/flame spread prevention properties
Test Result : AP Tape


Test Item
Test Standard
Unit
Test Result


Flame test of vertically placed cables
The carbonization length should not exceed 2.5mm from the bottom edge of the burner
-
Do not exceed (carbonization length: 0.6m)


During installation, photograph after installation
*Test Information

Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant)
Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape)
Number of test pieces : 5
Number of tiers : 1
Number of burners : 1
Position of test piece : Spatial type
Flame application time (minutes) : 20
AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape

Cable ties