We are the manufacturer & exporter of all kinds of rubber sheets, rubber compounds, reclaimed rubber, crumb rubber, rubber chemicals & all other related products like precured tread rubber
SBR Rubber sheet
SBR Rubber has properties similar to Natural Rubber. It has good abrasion resistance, excellent impact strength, very good resilience and a high tensile strength.
Applications:
SBR can be compounded for use as lining rubber, conveyor belt covers and other extremely demanding applications.
Size:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Finish:Smoothly finished or both side fabrics impress on finished.
Insertion:common cloth insertion or nylon fabric insertion
Color available is black,red,white,blue,green etc.
Neoprene Rubber sheet is a preferable choice of rubber sheeting when exposed to the weather. This product also has a moderate resistance to petroleum based fluids. Neoprene Rubber sheeting is used for many applications, including gasket making, matting, baffles & bumper strips.
We currently supply below sizes as stardard for your selecting:
1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm
Color available is black,red,white,blue,green etc.
TYPICAL PHYSICAL PROPERTIES AND VALUES:
Hardness, Shore A +/-5 65
Specific Gravity (DENSITY) 1.5g/cm3
Tensile Strength 4mpa
Enlongation Break 250%
Compression set maximum 20%
Heat Aging(70 Cx72hours)
Tensile Strength Change 20%
Elongation Break Change 25%
Handness Change 15%.
Other specifications we can produce per your request.
Neoprene Fabric reinforced sheets are fabric or cord fabric inserted and fabric surface finished
Insertion rubber sheet
General Insertion rubber sheet is manufacturing by SBR rubber material and Natural rubber material compounded.However,we also can put insertion into Neoprene rubber sheet and EPDM rubber sheet.Our insertion rubber are including general PE100 insertion rubber sheet and nylon insertion reinfore rubber sheet.
It have good resistant to aging and temperature.They are widly using in industrial,mine,from decorative to rubber rolling flooring runners etc.Further more,this rubber sheet can be provessed into die cut parts,strips or pads.
Thickness range from 1mm to 50mm.
Width available are 1m to 2m or cutting to other width according to your requirement.
Smoothly glossy finish or both side fabrics impress on finish. Continuous length.
Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949
Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.
Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color+ red¼grey¼natural, white¼black or any other required color
Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
