Sp Series Stainless Steel Submersible Pump

LS-S/SP SERIES STAINLESS STEEL GARDEN SUBMERSIBLE PUMP
The LS-S/SP is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged.The impeller,mounted on the end of the drive shat,consists of a back disk and blades.The fuid enters the rotating blade channel through the suction,where it moves radially from the center outwards,acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveye~towrds the volute.Here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.Correct motor cooling is ensured by the fluid being pumped.

WORKING CONDITIONS
Fluid temperature up to 35íµ.
Maximum ambient temperature 40íµ.
Max particale:5mm(Clean water).
Standard data and equipment:
Singe phase220v/50Hz.
í¦H05/07RH-Fí¦Neoperence submersible supply cable.
Supplied standard with 10 Meters of cable and plug.

The flow parts of this multi-stage centrifugal pump are made of all stainless steel and are suitable for pressurized transport.

Submersible pumps

Centrifugal pumps use rotor dynamics, most commonly with impellers, which rotate at a high frequency to create.

It can be widely used in cooling and air-conditioning systems, liquid transfer and liquid circulation in light industry.

The pump cover and impeller are made of metal inserts wrapped with fluoroplastics (F46/F4/PTFE/PFA) and sintered and pressed as.

Small submersible sewage pump is a kind of sewage treatment equipment with pump and motor connected design, submerged under liquid work, widely used in municipal engineering, industrial wastewater treatment and building drainage field. The equipment adopts vertical structure, with compact structure, low noise characteristics, can be directly installed in the sewage pool operation.

Submersible sewage pumps are submersible sewage pumps that are particularly suitable for transferring liquids containing hard solids, fibrous materials, and particularly dirty, sticky and slippery liquids. There are two types: AS and AV submersible sewage pumps.

QW submersible sewage pump is a kind of pressure pump with large flow channel anti-clogging hydraulic parts design, which greatly improves the dirt passing ability.

Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.

specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)

characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic