Overhead Line Automatic Splices

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

The intersecting line cutting machine is a kind of equipment that can automatically complete the cutting of the intersecting line ends, intersecting line holes, and pipe elbows (shrimp joints) of metal round tubes, square tubes or special-shaped tubes. The intersecting line cutting machine auxiliary design programming software used with this equipment is also a very important core accessory.

1, before commissioning must ensure that the pump and pipeline full of water, so as not to damage the pump.
2, the pump is filled with water to open the pump bleeder valve for exhaust, so as not to cause unstable pipeline pressure can not be normal pressure regulation.
3, the cabinet door on the surface of the manual stop automatic transfer switch, hit the manual for the frequency start, automatic inverter start by the outlet pipe remote pressure gauge according to the set pressure automatic control.
4, due to manual and automatic power supply into the line is not the same, so the manual and automatic pumps are not the same, all pumps to work manually are adjusted to the positive, automatic reversal of the frequency converter output on the U2, V2, W2, any two-phase switching can be.
5, set the pressure to stop the pump (i.e., the maximum pressure) just press (ENTER) on the inverter panel into the display (REF) and then press (ENTER) into the display of 40% (i.e., 0.4MPa pressure), such as the need to increase and decrease the pressure according to the (Increase key) or (Decrease key) to set the required pressure value (i.e., the pressure stop the pump), set the value of the pressure and then press (ENTER) to save, then the After setting the pressure value, press (ENTER) to save it, and then press (EXIT) to return to the main interface to complete the setting; the pump pressure is based on the highest pressure to be converted by itself without setting.

This line is entire automatic.This line cosist of computer mixing system,Extruding system, Molding system,Joint foaming system,Slot system,automatic packing system,immit system,Recycling system,electricity control system and so on . XPS plate quality produced by this line has achieved the high levels domestic and foeign. XPS thermal insulatin plate is widely applies in the architectural engineering, the air conditioning project as well as the refrigeration project.

Product description



This series of production line is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout, easy operation, highly automated and high production efficiency.


This line is adaptable to process cold-rolled and hot-rolled coils, silicon steel coils, stainless coils, colored coils, aluminum coils, and all sorts of plated and coated coils, and it widely applies to many industries like automobiles, containers, household appliances, food packing, construction materials, etc. This line consists of loading cart, uncoiler, slitter, scrap winder, cropping shear, tension controller and coil recoiler, etc. Loop bridge, pinch and deviation corrector are equipped between each machine. This automatic coil processing line is a integration of mechanical, electrical, hydraulic and pneumatic technology.

It is a compound automatic production line specially used for plates cementing (spraying), which is autonomously researched and developed by Dalian Huagong Innovation Technology Co., Ltd. It has proprietary intellectual property rights, mainly used for adhesive bonding of various plates, such as building energy conservation panel, aluminum cellular board, paper cellular board, fire door, anti-theft door and plastic panel etc. It can realize all working procedures to automate, such as achievement of loading materials, delivery, cementing, adhesive bonding, compound and unloading etc. The products from this production line are mainly sold to Central America, North America and other countries and regions.

Product feature:

Adopt CNC technology, servo motor in feeding, with high efficiency, stable work piece precision.
Key hydraulic, pneumatic and electric parts all imported.
Easy programming and can directly use the program data made by lofting software.
Computer with Chinese/English interface, easy operation, and can display the drawing of work piece.
Loading, marking, punching, cutting and unloading are all performed automatically.
Only need to input size of work piece, diameter of holes, stadia and quantity of work piece when edit program, or use CAD/CAM direct conversion.
The machining line installs supporting & pressing device to meet the requirements of processing angles with bigger bending.
With avoided shearing functions, so as to process fixed-length angles.
With function of self-diagnosis for failures.


Product Basic Parameter:

Model TJX2020 TJX1412

Angle size
L63í-63í-4í½L200í-200í-20
L40í-40í-3í½L140í-140í-12.

Max. Punching (dia. í- thi.) (mm)
ª¦26í-20 ª¦26í-12.

Punching force(KN) 1000 600.

Marking force(KN) 800ú¿1000ú¬ 800ú¿1000ú¬.

Shearing force(KN) 1400 900

Max. length of blank(m) 14 12

Max. length of finished(m) 14 12

Punches per side 3 2

Group of Marking letters 4 4

Dimension of letter(mm) 14í-10í-19 By customersí» request

CNC axes 3

Shearing mode Dual-blade shearing.

Feeding speed of angle(m/min) 40 60.

Range of stadia(back mark) (mm) 20-170 15-110.

Processing precision Accordance with GB2694-81.

Programming mode Input by keyboard, RS232 interface, floppy disk and USB interface.

Overall dimensions(mm) 32000í-7500í-2350 25000í-7000í-2200.

Gross Weight (kg) 24000 16800.


Wooden cases,container.

Automatic Shear Line Machines and Rebar Cutters

The CNC rebar Cutting Machine is used for straightening,fixing length, and cutting steel wire rods into straight bars automatically and continuously, which is suitable for automatic processing of straight bars in construction projects. The equipment is suitable for straightening and cutting round steel wire , deformed steel bars and other all kinds of wire bars.

Features of the CNC reinforcement steel rebar shearing production line for sale

1.Adopting hydraulic shearing, small volume, high cutting force and high output, low noise, long service life and stable operation, etc.
2.Adopting import seal to the hydraulic cylinder, it is greatly increased service life.
3.Our hydraulic system only needs 15Mpa to cut the steel bars of�?25.
4.The moving blade is innovation design of oblique edge. The slop is about 3 �° larger than other brand products in the industry.
5.Rebar fixed-length mechanism adopts servo motor control, adjusting the distance between the shear blade and positioning baffle through Servo motor drive screw mechanism.
6.The track adopts moving track, which is more precise and small spring back during the rebar process compares to the mobile baffle scheme.
7.Chain feed mechanism, without slip and high efficiency.
8.Shearing efficiency:10 hours a day shearing 50 ton,and a shearing process needs about 1 minute.


The CNC rebar Cutting Machine is used for straightening,fixing length, and cutting steel wire rods into straight bars automatically and continuously, which is suitable for automatic processing of straight bars in construction projects. The equipment is suitable for straightening and cutting round steel wire , deformed steel bars and other all kinds of wire bars.

Features of the CNC reinforcement steel rebar shearing production line for sale

1.Adopting hydraulic shearing, small volume, high cutting force and high output, low noise, long service life and stable operation, etc.
2.Adopting import seal to the hydraulic cylinder, it is greatly increased service life.
3.Our hydraulic system only needs 15Mpa to cut the steel bars of�?25.
4.The moving blade is innovation design of oblique edge. The slop is about 3 larger than other brand products in the industry.
5.Rebar fixed-length mechanism adopts servo motor control, adjusting the distance between the shear blade and positioning baffle through Servo motor drive screw mechanism.
6.The track adopts moving track, which is more precise and small spring back during the rebar process compares to the mobile baffle scheme.
7.Chain feed mechanism, without slip and high efficiency.
8.Shearing efficiency:10 hours a day shearing 50 ton,and a shearing process needs about 1 minute.