Eva resin material, vacuum multi-layer seamless pressing. Yellow in color, light and soft,
well adapted to cover.
Max. applied voltagekV):0.4
711001 300 x 300mm
711002 400 x 500mm
711003 600 x 800mm
711004 800 x 1000mm
711005 900 x 1000mm
711006 1000 x 1000mm
711007 1000 x 1500mm
711008 1000 x 2000mm
Max. applied voltagekV):17
711009 600 x 1000mm
711010 680 x 800mm
711011 680 x 1200mm
711012 800 x 1000mm
711013 900 x 1000mm
Max. applied voltageï¼?kV):26.5
711014 600 x 1000mm
711015 680 x 1200mm
711016 800 x 1000mm
711017 900 x 1000mm
The rubber insulating blanket is made of abrasion-resistant, anti-aging elastic rubber, and the product is flexible and easy to use. It is mainly used to protect workers from accidental contact with live components during line maintenance.
Square rubber insulating blanket
Code Color Max. applied voltage (kV) Sizeï¼?mm) Holes
712001 Orange 35 914 x 914 6
712002 Orange 35 686 x 914 6
SLIT type rubber insulating blanket
713003 Orange 35 914x914 28
This product is a specialized stripping device developed for various wire diameters of
insulated wires currently in use in China. The product has a simple structure, modular
design, and can be operated by a single person. By changing the direction of the
handle, functions such as embedding wires, peeling, and exiting peeling can be
achieved. By replacing the operating lever, it can be applied to both power-off and live
working operations.
1. Components and standard configurations
Specification Name Function contain
TBP-06 Insulated Cable Stripper Fixed cutting tools and connecting operating rods tocomplete the peeling function One Stripper
TBP-15 Operating tools 1.5m insulated hot stick for use in arm truck operations One hot stick(Choose one)
TBP-25 Operating tools 2.5m insulated hot stick for use in ground potential operation method One hot stick(Choose one)
TBGX-01 Storage box Storing stripper racks and corresponding tools One box
2. Technical Data
Applicable cable: Cross linked polyethylene insulated wire, cross-section 50mm2-
240mm2 (special cable types can be customized)
Peeling operation: single person operation;
character of operation: Live working of bucket arm truck: TBP-15 type operating rod
can be used for stripping operation on power outage lines;
Ground potential live operation: TBP-25 type operating rod can be used for live
stripping operation on the operating line.
Working voltage: 10kV in non rainy and snowy environments
3.Ordering instructions: When selecting the product, please specify the nature of the
operation (power-off operation/live operation) and provide the specific model of the
insulated wire (with different thicknesses of the insulated wire skin), in order to select
the appropriate tool holder. After the tool wears out slowly, you can grind it yourself or
order a new tool.
TID POWER insulated clamp rod is made of small diameter high strength epoxy insulated pipe, the product is light weight, high mechanical strength, good insulation performance, the metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip.
The unique ratcheting locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The insulated clamp pole is mainly used for clamping or fixing the conductor, and the maximum can be clamped 240mm2 conductor. Special attention: The Hand is forbidden to hold above the limit when using.
TID POWER multi-functional insulation clamp is made of small diameter high strength epoxy insulation pipe, the product is light weight, high mechanical strength, good insulation performance, the
metal parts are made of aluminum alloy and stainless steel, the appearance is beautiful and does not rust, hand grip part of the design of the hand shape, comfortable grip. The unique ratcheting
locking mechanism can keep the insulated clamp rod in an arbitrary holding state. The multifunctional insulating clamp is mainly used for gripping various tools on the live working line, mounting and fastening
the shielding cover. Special attention: The Hand is forbidden to hold above the limit when using.
Switch Sticks also named disconnect sticks, used for opening and closing disconnect switches or cutouts and also used for installing and removing open-link fuse links.
Switch stick are made of foam filled epoxy fiberglass tube and cast bronze in 3 types : standard Prong head ,Heavy duty prong head or insulation prong head. It is also can be made by customer ordered head.
1 1/4 Switch Stick Head Standard Prong Head
1 1/4 & 1 1/2 Disconnect Head Heavy Duty Prong Head
1 1/2 Disconnect Head Insulation Prong Head
Features:
1.High-quality copper raw materials, copper content of more than 99.7%
2.Copper cable lug widening and thickening, high conductivity, fast heat dissipation, corrosion resistance. The model number is engraved on the front.
3.Copper cable lug have single hole, double hole connection, the front have model.
High-quality copper raw materials, copper content of more than 99.7% .
Our company grounding copper wire made by 0.2 mm diameter high-purity oxygen-free electrolytic copper wire multi-strands woven, copper purity of 99.9% , external by transparent PVC pipe insulation protection.
The product has low resistance and large current carrying capacity, and is a special cable for portable short-circuit grounding wire in power system.
Advantages:
High copper content, purity of 99.9% . High conductivity, low resistance, low loss, strong current load.
Covered with transparent insulating layer, waterproof, sunscreen, antifreeze, wear-resistant, anti-aging.
Smart Printing: customizable, not easy to fade.
Used to lift distribution transformers and equipment onto structures.
1. Installed on the live line pole.
2. Rated lifting capacity can up to 900kg, including load and pull rope tension.
3. With a 50mm wide and 1.4m long polyester belt.
4. Main body is a 67mm diameter high quality foam filled fiberglass tube, 0.66m long.
5. Wide handle for easy opening, insulated gloves for quick operation of ratchet
wheel.
TID POWER insulated crane connecting rod is made of high-strength epoxy insulated pipe, and the metal parts at both ends are locked on the insulating pipe by pressing process, so the tensile strength is high. The insulating lifting connecting rod is mainly used for the insulating connection between the crane and the live conductor during the live working of the crane.
Portable earthing and earthing short-circuit are used for temporary earthing of electric power and rail transit during overhaul construction to ensure the safety of workers.
Performance Standard: DL/T879 -2004 portable earthing and earthing short circuit equipment for live workingï¼?
Material requirements: high purity copper wire, copper purityâ?¥99.999% .
Technical parameters: the grounding wire is made of many strands of soft copper wire, the diameter of the single wire is not more than 0.2 mm, and the surface is covered with transparent insulating layer (including the grounding wire, where it is connected with the end clamp of the grounding wire) , the thickness of the protective layer is not more than 1.5 mm.
The installation of the terminal adopts the secondary drawing process. The transparent sheath of the grounding line is installed in the pipe and the spring is added to form the secondary protection, therefore, the copper wire can not be broken during the use, and the transparent heat-shrinkable tube is used for the terminal sheath to observe whether the ground wire has been broken or not.
Performance Standard: DL/T879 -2004 for live working portable earthing and earthing short circuit device;
Material requirements: wire clamp made of aluminum or copper alloy casting, good conductivity, holding firm. The insulating rod adopts high strength epoxy glass fiber pipe,
which has high mechanical strength and good insulation performance. The handle is made of insulating rubber, non-slip and good grip.
Telescopic high-voltage conductor separated insulated pole is used to support different phases of conductors in live line work. The insulated support pole can be adjusted according to the line distance, it contains three fast conductor clip, which can hold up to three conductorsã?? Hold on hot wire and release wire are simple and quickly.The main rod is made of high strength epoxy resin and pultrusion insulated tube.
voltage resistance: 100kV/300mm, high mechanical strength, good insulated performance. It's safe and convenient to use.
Metric scale is used on a triangular telescopic insulating height measuring rod, which can measure the height of overhead power lines and communication lines from the ground, it can also be used to trim branches, clean wires, replace fuses, replace light bulbs.
Triangle telescopic insulation height rod section as follows, its approximate triangle arc is based on the most comfortable shape of the human hand grip and determine. Since the shape is similar to a triangle, the axial sliding during torsion operation can be avoided. Compared with the traditional circular manipulator, the rod head of the manipulator has better stability when operating, and is easy to be connected to the operating part for convenient operation.
1. Applicable Standard: IEC 60855, ASTM F711.
2. Accessories materials: General Hook- aluminum alloy;
Tube: top section 1- fluorescent green glass fiber foam filled tube;
Other parts: yellow glass fiber tube;
Handle: black insulation rubber;
Packaging: green nylon waterproof bag.
3. Features:
3.1 Scale is clear and easy to read;
3.2 Unique design-approximate triangle rod-tube structure, each section can be quickly retractable positioning;
3.3 High visibility without rotating the bar to look for snap-on.
The top bar is covered with fluorescent paint for easy operation and identification. The inside is filled with moisture-proof insulating foam, to prevent moisture build-up;
3.4 Easy to operate-new large pin-set button of the same size, easy to operate even with insulated gloves;
3.5 Easy to maintain-smooth without air holes on the outside of the shaft, easy daily cleaning and waxing;
3.6 multi-function-high strength aluminum alloy universal joint, can be used to measure height, and can be firmly connected to a
variety of tool heads;
3.7 Various specifications-extended length from 2.43-15 m, retracted length from 0.8-2.15 m;
3.8 High electrical insulation strength-all products passed 100kV/300mm power frequency voltage test.etric scale is used on a triangular telescopic insulating height
Round telescopic insulation cargo height measuring rod is metric scale, the main insulation rod is made of high strength epoxy glass tube, the product has excellent electrical and mechanical properties, the height of the rod light weight, easy to operate, can be measured from the ground height of goods, but also the height of overhead power lines, communication lines, etc.
Reading method:
Pull out from the joint of the crossbar one section at a time, stretch to the point where the two sections meet, make the scale line between the two sections align, and the locating pin will pop out automatically until the crossbar is on the object to be measured, then the eye and the elevation ruler outside the base rod on the upper end of the rod button to maintain a level, the number shown above is the height of the measured object value.
Closing method:
After using the goods stick ruler, hold the thick section of the bottom handle with the left hand, press down the pin with the thumb, hold the upper western section with the right hand, push back while twisting the edge, loosen the chimera of the two sections in turn, take it back section by section.
TID POWER insulated jumper support main body is a high-strength epoxy insulating tube.
One end of the jumper is equipped with a cross-arm angle steel locking wire clamp, which
can fix the insulating jumper support on the cross-arm. There are adjustable hooks in the
middle for hanging insulated bypass jumpers.
Product Features:ï¼?
insulated Tree Pruner are suitable for prune tree branches and trunks under distribution power l ines. Insulated tree pruner adopt the principle of mechanical levers and pulley blocks. They are composed of
shears, saws and insulating poles.
The insulating poles are made of high-strength insulating tubes. The insulating poles can be customized according to user requirements. With sectional or telescopic connections.
The maximum working range of the insulated tree pruner is 6m, the maximum effective opening of the scissors is 38mm, and the operating line voltage is not higher than 35kv. It is an ideal tool for the power and railway utility to prune trees along the power line.
Product Character
1. The Pole is made of high strength insulating tubes,which passed 100kV/300mm test .
2. Max Length: 8 M;
3. Pulley lever transfer force;
4. Spring rebound design, quick rebound of the knife head, automatic reset
5. Steel cutter head, rust-proof and wear-resistant, sharp and strong, easy to break branches
6. The saw blade grinds teeth on three sides and does not jam the saw;
7. The maximum effective opening of the scissors is 38mm and 50mm two type;
Insulated Tree Pruner Size:
Products Code Length(M) Section Max Opening scissor mm)
610017 2 2 38/50
610018 3 3 38/50
610019 4 4 38/50
610020 5 5 38/50
610021 6 6 38/50
610022 7 7 38/50
610023 8 8 38/50
The insulated four-legs cable support frame is mainly used to support the
cable when the work-live. The bottom four-pin support of the design is safe
and stable. The middle adopts the telescopic design, which can flexibly
adjust the height of support. The top adopts the buckle type spiral insulated
hoop, which is convenient to add the cable.
This product is light weight, the whole body can folding, easy to carry, with the
moisture-proof insulated bag.
The features of product
1. The main body of the support frame is made of high strength epoxy insulated braid and pultrusion tube, which has light weight, high strength and good insulated performance.
2. The supporting frame structure design uses telescopic and folding , which is convenient for storage and carrying.
3. The cable clamps of this supporting frame uses a buckle spiral insulated hook, which is convenient to operate and saves time.
4. The main body of the product is yellow, the insulated accessories are black, the color is eye -catching and the design is beautiful
Insulated Tree Pruner are suitable for prune tree branches and trunks under distribution power lines. Insulated tree pruner adopt the principle of mechanical levers and pulley blocks. They are composed of shears, saws and insulating poles. The insulating poles are made of high-strength insulating tubes. The insulating poles can be customized according to user requirements. With sectional or telescopic connections. The maximum working range of the insulated tree pruner is 6m, the maximum effective opening of the scissors is 38mm, and the operating line voltage is not higher than 35kv. It is an ideal tool for the power and railway utility to prune trees along the power line.
Product Character ï¼?
1. The Pole is made of high strength insulating tubes,which passed 100kV/300mm test .
2.Max Length: 6 M;
3.Pulley lever transfer force;
4.Spring rebound design, quick rebound of the knife head, automatic reset
5.Steel cutter head, rust-proof and wear-resistant, sharp and strong, easy to break branches
6.The saw blade grinds teeth on three sides and does not jam the saw;
7. The maximum effective opening of the scissors is 38mm;
Insulated Tree Pruner Size:
Product Code Length (M) Section Product Code Length (M) Section
610001 2 2 217009 4.5 3
610002 3 2 217010 4.5 4
610003 3 3 217011 5 3
610004 3.5 2 217012 5 4
610005 3.5 3 217013 5.5 3
610006 4 2 217014 5.5 4
610007 4 3 217015 6 3
610008 4 4 217016 6 4
This is a simple, easy to use, portable glove inflator. The inflator provides a quality means of inspecting gloves in the field. The glove is secured to the inflator using a nylon strap and fastened with a hook and pile closure. Inflation is accomplished by pumping the bellows of the inflator against any surface.
Main Character
1.No special tools required for installation, no
need crimping operation.
2.Automatic Splice is tension-dependent device
that the line must have at least 10% of the rated
breaking strength during installation to ensure
reliable electrical connection.
3.The current passes through the wire to the
metal crucible, flows through the metal crucible to
pass the current to the outer casing, and the
outer casing transmits the current to the metal
crucible, which is transmitted from the metal crucible to the conductor.
4.The loop resistance of the Automatic Splice is not more than 1.1 times the loop
resistance of the isometric conductor. The metal crucible can penetrate the residual oxide
layer on the surface of the conductor ,so that electrical conductivity is Reliable.
The wire pre-connecting insulating mounting rod is mainly used to fasten the lead line on the main lead line when the lead line is connected in live operation, which reduces the operation risk
caused by the sloshing of the lead line and the lead line when the lead line is fixed in the clamp, easy and fast operation, high security.
When working, just put the drain wire into the wire clip at the lower part of the operating head of the mounting rod in advance, tighten the screw to lock the wire, then hang the installation on the main wire, and then pull the mounting rod down, the lower part of the operating head of the installation bar will move up to the main line, and then clockwise screw the installation bar, the top of the drainage line clamp will lock the main line. After installing the clamp connecting the main lead to the drain line, the gun operator can be used to loosen the drain line by twisting the clamp lock ring of the lock drain line on the mounting rod.
Then turn the mounting rod counterclockwise, loosen the locking mechanism of the mounting rod on the main lead wire, and push the mounting rod upward. The wire clamp at the lower part of the operating head of the mounting rod will move down, loosen the clamping on the main lead wire, and withdraw the mounting rod, live wire connection work completed.
TID POWER insulated cross-arm connecting rod is made of highstrength epoxy insulated pipe, and the metal parts at both ends are locked on the insulating pipe by pressing process, so the tensile
strength is high. The connecting rod of the insulating cross-arm is mainly used for connecting the tension tool and the cross-arm when the wire is tightened.
Telescopic fiberglass ladders are widely used for city power line urgent repair ,Substation Inspection and other linemen works.It is the necessary tools for utility,company,hotel,family and so on.
1. The advantage of the telescopic fiberglass ladders
Light weight, good insulation performance ,anti slip , corrosion
resistant and small package which can put into the car.
2. Technical Character :
3.Safety note:
1.Please inspect the ladder carefully with all the parts in the good condition.
2.Please make sure install the ladder on the hard and flat ground to preventing any
dangerous caused by slanting.
3.Please be careful when you use the ladder in the windy day.
4.Please donâ??t put over weight on the ladder.
5.Please keep the stand on the middle of the ladder to avoid lost balance when you on
the ladder.
6.Please don't move the ladder when the person on it.
9.Please don't put your hand on the steps when retract the ladder.
10.Please note only one person allowed on the ladder the same time.
11.Please stock the ladder in the dry,ventilate room .
Insulated hook ladder has many applications in high-voltage maintenance, which can position the line workers in the most advantageous working position and carry out line
repairs in almost inaccessible places. All hooks are made of tempered steel with a diameter
of 26mm and can rotate to best accommodate various angles on the structure. The steel
chain is clamped onto the hook to help secure the ladder to the bracket. The crossbar
material for both rated ladders is 32mm epoxy glass coated with a sand layer.
Features
1. Designed to effectively, position linemen for
high-voltage maintenance,make line repairs
possible, even in inaccessible places
2. Hooks are formed from 26mmdiameter
tempered steel, these hooks can be swiveled to
best various angles on structure
3. Ladders include hooks and steel chains, the
steel chains clip to hooks to assist in securing
ladder to support, rung material for both rated
ladders are 32mm sand-coated Epoxy fiberglass
rod,it has excellent anti slip performance.
4. Length can be customized
The insulated centipede type ladder is named after shaped like a centipede,the characteristics are that this ladder is based on the straight rod as the center pillar, and the main mechanical load and insulating
strength are carried with the insulated stretching rope,The parallel settings of the insulated crossbar are used as a ladder to run through the rod,they are mainly carry the weight of climbing staff.Compared with the ascending method of conventional live operations, the insulated centipede type ladder can adapt to a variety of terrain operations,it can solve the problems that the power-based operating vehicles and machinery cannot enter the operating area caused by inconvenient road traffic, such as the fields area, hillside area, grass area,etc.This ladder is not highly required for the geographical conditions of the operation site. The weight of this ladder is light, easy to carry, convenient operation.Itâ??s expand the new way to board the power operation.
The feature of the productï¼?
1. The trunk is made of high-strength epoxy weaving and pulling insulated tube. It has good insulated performance, high strength, good rigidity and small offset under load.
2. The ladder pedal can be made of circular insulated tube or Reuleaux triangle insulated tube, good insulated performance, high mechanical strength, Reuleaux triangle insulated tube foot stepping on the contact surface, comfortable feet when climbing.
3. Insulated wind rope adopts insulated nylon rope or insulated silk rope, with good insulated performance and high stretch strength.
4. The structure design of the insulated centipede ladder is a segmented plug-in locking type, with a mounting base at the lower end to fix the rod body. Each section of the structure about 3M, and the foot pedal is fixed. It is equipped with a waterproof and moisture-proof insulated bag, which is easy to carry.
5. This ladder can be equipped with insulated work platform, and staff can stand on the insulated work platform to work, which greatly improves the comfort of the operation.
6. The main insulated tube is yellow, and the ladder pedaling tube is fluorescent green or yellow.
Noteï¼?1.The insulated centipede type ladder provide with the insulated nylon rope as
the standard wind rope. If the insulated silk rope is required, please explain when
purchasing.
2.Insulated centipede ladder standard does not include insulated working platform, if
you need insulated working platform, please specify at the time of purchase.
Features:
1.Matching screws and nuts, 10 mm diameter of the hole at the end, screw diameter of 8 mm.
2.Fine solder joint, welding deformation is small, weld has good crack resistance.
3.The product adopts high strength steel, the surface can be galvanized or copper-plated according to the need.
The conductor shielding cover is made of high density crosslinked polyethylene material, and is mainly used for shielding wire of distribution line. The tensile strength is not more than 11 mpa, and the mechanical piercing force is not more than 30 N, you can wear insulating rubber gloves or use a lever to operate.
Conductor Shield (with adapter)
Code Max. applied voltage kV) Class Size mm) Weight kg)
714001 26.4 ASTM F712 class 3 51 x 1500 1.8
714005 36.6 ASTM F712 class4 51 x 1500 1.8
Conductor Shield (without adapter)
Code Max. applied voltage kV) Class Size mm) Weight kg)
714002 26.4 ASTM F712 class 3 51 x 1500 1.4
714004 36.6 ASTM F712 class4 51 x 1500 1.4
The rubber insulated jumper cover is used to protect the live worker from being hurt by touching the live body. Curl design for easy installation or removal. The product adopts special elastic rubber, the material is exquisite, the insulation performance is high. The tail uses the thread design, may many match uses. All products pass 20kV/3Min ac electrical performance test
Code Color Max. appliedvoltage(kV) Size mm)
713101 Orange 0.7 30 x 390
713102 Orange 17 30 x 400
713103 Orange 17 30 x 600
713104 Orange 17 30 x 880
713105 Orange 17 30 x 1200
713106 Orange 17 30 x 1850
713107 Brown 17 30 x 600
713108 Brown 17 30 x 8
Conductor Insulated Shield adopts special elastic rubber, wear-resistant, anti-aging, high insulation performance. The utility model is mainly used for insulating and shielding the conductor when the live working, so as to avoid the live working workers from being hurt.
Conductor insulation shield (with joints)
Code Max. applied voltagekV) Size mm) Weight kg)
713201 17 31.5 x 1375 2.9
Conductor insulation shield (without joints)
Code Max. applied voltage kV) Size mm) Weight kg)
713211 17 31.5 x 1375 2.7
Insulated Scaffolding which are made by fiberglass reinforced plastic, are used for live line inspection at Power substation.
1.Main material
1.1 Frame : Foam filled fiberglass tube in Orange.
1.2 Plat : Insulation board.
1.3 Strengthen Bar: Foam filled fiberglass tube in Orange.
1.4 Joint Part:High Aluminium Alloy
1.5 Joint Part:High Aluminium Alloy
2. Character:
2.1 It is made by foam filled tube,so that can keep the moisture out .
2.2 It can be used up to 800kV.
2.3 High Mechanical resistant to bending and twist
2.4 It can be afford 300KG weight.
2.5.High Resistant to bad weather and corrosion element
2.6 easy to assemble and to move.
3. Sizes of 2 types of the modules Customized Model Available as well:
- 1m x 1m modules
- 1m x 2m w/ 5 pins modules
4.Foot Type We have two type Adjusted and Movable of Insulated Scaffolding foot
The main structure of the fully insulated scaffold (platform) is a high-strength insulating tube made of fiberglass and epoxy resin (EP). It is built by a ladder frame,a horizontal connecting rod and a diagonal connecting rod, and a support rod plus an insulating platform board. The insulating scaffold (platform) is quick to build, easy to disassemble and assemble, without any installation tools, and convenient to
use. It has high mechanical strength, Excellent insulation performance, high flexibility, safety and stability, fast disassembly and assembly, non-conductive, anti-oxidation, corrosion resistance, non-sparking, etc. It is suitable for a variety of live construction sites and high-altitude live operations. It makes up for the inability of insulated bucket trucks to enter the site Insufficient construction.
The round teles coping hot s t i c k s have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The sticks are short,so that it can be easy carried on most trucks.The spring-loaded buttons can keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons into right place to make sure the linemen well done the job.
1. Applied Standard: IEC60855, ASTM F711.
2. Parts Materialï¼?Universal head with hook: Aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in yellow,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
The triangle tube of the telescoping hot stick have maximum convenience for the lineman because they permit them to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments, so the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees, replace bulbs and complete many other overhead tasks.
The triangular tube section is shown as below pictures, approximate triangular arc is the most comfortable shape of hand grip. approximately triangular shape can avoid axial sliding during torsional operation. Compared with the traditional round tube, it is more stable, easy to connect to the operating part and easy operation.
1.Applied Standard: IEC60855, ASTM F711.
2.Parts Materialï¼?
Universal head with hook: aluminum alloy in nature color
Tube : Top section: Foam filled fiberglass tube in fluorescence green,
Other sections: Fiberglass tube in yellow
Handle: Insulation rubber in black
Bag: Water-proof Nylon bag in green
3. Product featuresï¼?
3.1 Unique design - approximately triangular tube structure, each section can be quickly telescopic positioning, no need to turn the joint to find the buckle and fixed.
3.2 High visibility - The outer layer of the top tube is fluorescent paint for easy identification during operation, the inner part is filled with moisture-proof insulating foam to prevent moisture accumulation.
3.3 Easy to operate -New large button with same size, easy to operate even with insulating gloves.
3.4 Easy to maintain - the sticks body is smooth and nonporous, easy for daily cleaning and waxing.
3.5 Multi-function - high strength aluminum alloy universal joint, can firmly connect all kinds of tool heads.
3.6 Various specifications - Extract length from 2.43 to 15 meters, retract length from 0.8 to 2.15 meters.
3.7 High electrical insulation strength - All products are passed 100kV/300mm power frequency voltage test.
Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage
detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
Round telescopic insulating height measuring rod is calibrated to metric scale. The main insulating rod is made of high strength epoxy glass fiber tube. The product has excellent electrical and mechanical properties.
The height measuring rod is light in weight and easy to operate, it can measure the height of overhead power line and communication line from the ground. The calibration of the product surface is clear and accurate, and the measuring error is not less than 5cm.
How to use it:
1.When the height measuring rod is used, the rod cap is opened, and the hook is tightened on the screw of the details, and then gradually pulled out to the two sections of the Chimera, with a little force, and the edge of the twist is pulled out to ensure that the vertical lines of the two sections of the scale are aligned, until the semicircle marks between the two sections form a circle, then verify that the snap is fully ejected to ensure a complete lock between the two sections.
2.After the use of the height of the bar after the draw, one hand holding the lower thick pipe, with the thumb to hold the snap button, the other hand holding the top of a thin section, twist the edge up push, take back section by section.
3.The hook of the height measuring rod is screwed down, and can be installed with an electric apparatus head, and can be used as an electric apparatus rod.
Scale reading method:
After hook the altimeter pole to the measured object, make sure the altimeter pole is perpendicular to the ground, then observe the figures of the hand-held altimeter pole, the upper end of the node is aligned with
the scale line, this number is the height of the object being measured.
Product Features
Insulating Stick for rescuing work in various live workplaces. It is used to grasp the injured person by the waist and bring them back to a protected area. It can also be used to push a cable away from
a victim. Indoor and outdoor use.
Product Character ï¼?
1. Fiberglass Stick: meets ASTM F711, IEC 60855-1 and IEC61235 standards
Top tube - �¦28 round foam filled tube to prevent penetration of humidity
Outer tube - pentagonal tube is not easy to slip and increases torque
Environmentally friendly paint free process can avoid paint damage or paint
peeling
2. Hook: �¦18 steel tube, U shaped fitting, can be used for high voltage detector.
3. Dielectric strength: 100kV/300mm
4. Adapter: Insulation material for universal end fitting
5. Push button: Simply operation
6. Handle: Rubber material to protect the tip
Code:610201; Strand wire:100 ;Steel core aluminium stranded wire:400; Maximum opening mm):32; Insulated handle length mm):460; Total product length mm):550
610202; Strand wire:120; Steel core aluminium stranded wire:720; Maximum opening mm):50; Insulated handle lengthmm):480; Total product length mm):650
Metric scale on a triangular telescopic insulation cargo height measuring rod. It can measure the height of truck goods from the ground, and also can measure the height of overhead power lines and
communication lines from the ground, it can also be used to trim branches, clean wires, replace fuses, and replace light bulbs.
Triangular telescopic insulation cargo height measuring rod section as follows, its approximate triangle ARC is based on the most comfortable hand grip shape and determine. Since the shape is similar
to a triangle, the axial sliding during torsion operation can be avoided.
Compared with the traditional circular manipulator, the rod head of the manipulator has better stability when operating, and is easy to be connected to the operating part for convenient operation.
1. Applicable Standard: IEC 60855, ASTM F711.
2. Accessories materials: General Hook: aluminum alloy; pipe: the top section and the pole part for fluorescent green glass fiber foam filled pipe, other parts: yellow glass fiber pipe; handle: black rubber insulation; Packaging: green nylon waterproof bags;
3. Features:
3.1 scale is clear and easy to read;
3.2 unique design-approximate triangle rod-and-tube structure, each section can be quickly retractable and fixed without turning the rod section to look for snap;
3.3 high visibility-the top link is covered with fluorescent paint for easy operation and identification, and the inside is filled with moisture-proof insulating foam to prevent moisture accumulation;
3.4 easy operation-new large pin-set button, the buttons are of the same size and are easy to operate even when wearing insulating gloves;
3.5 easy to maintain-the shaft has a smooth, non-porous surface for daily cleaning and waxing;
3.6 multi-purpose-high strength aluminum alloy universal joints, it can be used for height measurement and also can be firmly connected to various tool heads.
3.7 various specifications-extension length from 2.43-15 meters, retraction length from 0.8-2.15 meters;
3.8 high electrical insulation strength-all products passed 100kV/300mm power frequency voltage test;
The shotgun stick is mainly used for live installation of wire clamps and grounding wire clamps, and is also suitable for installation of overhead and underground circuits and various terminal fittings. The shotgun stick is mainly characterized by good work applicability and convenient operation.
The rod body is made of high-strength epoxy resin knitted + pultrusion tube , and all products have passed the power frequency test of 100kV/300mm.
All insulated parts of the shotgun stick are easy to wipe clean for easy maintenance and do not require on-site disassembly for cleaning, The shotgun sticks are available in orange and yellow colors and are available in single type or sectional type.
Single Type
Folded type
The Post Hole Digger is part of the Powerbreaker Insulated Digging Tools .
This is the ideal tool for digging and scooping the earth out of post holes, the scissor-like action allows you to grip and remove the soil without making a mess.
Product Features:
One piece heavy duty fiberglass handle which tested with 100kV/300mm each by each and paint coated with epoxy ,The handle end covered with insulated rubber .
The blade use alloy steel which were tempered for strength & rigidity.
Portable insulating tool holder is mainly used for temporary placement of tools on live work sites, the bracket is very convenient to place and access tools, the bracket can be folded, and it is convenient to handle
The high-voltage discharge rod is made of new insulating materials. The portable
retractable high-voltage discharge rod is convenient for use in various outdoor highvoltage tests, especially after the DC withstand voltage test, the charge accumulated
on the test product is discharged to the ground to ensure personal safety. The
retractable high-voltage discharge rod is easy to carry, convenient, flexible, small in
size, light in weight and safe.
1.Resistance and Straight Dual-purpose Connection Type Discharge Rod 530001-530003
2.Resistance and Straight Dual-purpose Telescopic Discharge Rod 530011-530014
The FRP temporary crossbar is made of moisture-proof small closed-cell foam filled with high-strength epoxy fiberglass tube as the insulating body, equipped with an insulated O-lock clamp, as well as a lightweight high-strength aviation aluminum holding rod base and nylon with ratchet holding rod locking system. The product has the characteristics of good insulation performance, high mechanical strength, small weight and easy installation and is widely used in temporary wire support tools when working with electricity.
Product Features:
Quick installation and removal
The pawl connector has a spacious handle for easy operation with rubber gloves
50 mmx1300mm nylon strip, can adapt to most pole structure
(Note: Belts with wear belts need to be checked regularly)
This Fall Restraint (Anchor Point Tool) adopts moisture-proof small-mouth closed-cell foam filled high-strength epoxy glass fiber tube as the insulating body, equipped with U-shaped hanging ring, and light weight and high strength aviation aluminum pole base and nylon ratchet holding rod locking system. This product can be used to fix the safety belt of line workers, and connect the anti-dropping device or light industrial equipment.
Features:
The design meets the load of 250kg, and the insulation distance is 160mm;
Large U-shaped bolts are convenient for the operator to pass through the lifting ring easily;
50mmx1300mm nylon belt ratchet assembly can be quickly and easily connected to the pole
TID POWER Insulated bypass jumper adopts soft insulated conductor to pass through the support pipe of middle high strength epoxy insulated tube. The clamp design of both ends is suitable for
glove operation and insulation rod operation. Insulated by-pass jumper is mainly used for 15kV by-pass operation when temporarily
connected to the conductor.
10kV Lithium Electrical Insulated Saw of High Branches of Trees
1. The product is suitable for 10KV live operation
2. This saw only 4.5kg,it is light and easy to carry.
3. The product comes with rainproof cover, which is safer to use.
4. Standard 1.4kW motor, selectable1.8KW high efficiency permanent magnet motor, strong output power, high cutting efficiency
5. Short rod can be selected for climbing truck operation, which is convenient to operate; The extended rod can be used for long-distance operation, it can reached a height of 4m
Personal security grounding wire is composed of 4 parts: pliers, cable, grounding wire and canvas bag, pliers used insulation handle, its safety and reliability. The cable is made of 99.99% pure copper without oxygen, with high purity and low resistance. The grounding clamp is made of aluminum alloy, which is strong and light in weight. Canvas bag is strong and wear-resistant, easy to carry.
Insulated jumper wire set is used to bypass work areas during line upgrades and temporary or emergency repairs.
1. Compliant with: ASTM F2321 standard
2. When installing and removing jumper clamps, appropriate rubber insulation must be
worn to clear the blockage
code:
810101
810111-810119
810121-810129
ACSR Cable Cutter with Insulated is mainly used for cutting the ACSR cable in live operation.Head of cutter is high-strength alloy steelï¼?blade is smooth and sharp which with a good rigidity.The main body of the handle use the double pultrusion process and foam filled fiberglass tube,with moisture proof,good insulated and mechanical strength.
The handle use the rubber material,itâ??s eyecat ching, safe, comfortable and eas y to operate.
Note When using in live operation, you need to wear insulated rubber gloves to maintain a safe distance and abide by all the safety specifications.
Code:610221; Total Length:788; Length of handle:686; Maximum diameter of suitable wire (mm):ACSR 170