Jet Fuel (Jp54)

Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.

Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.

Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.



Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.

Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.

We are LIMITED LIABILITY COMPANY "OIl STREAM " we have several eligible Seller/Refineries and business partners in Asia, Europe and united Arabs, We are registered oil trading company for both Kazakhstan, Qatar and Georgia, Romania product origin seller/refinery We get direct quotation from Seller/Refinery for a variety of product ranging from petrochemicals, oil, natural gas to Bitumen and Methanol, reach us + seven nine eight five seven one four four four eight nine Blend Crude Oil (REBCO), Diesel Gasoil (D2), ARABIAN LIGHT CRUDE OIL , Mazut, Virgin Fuel Oil D6 , Aviation Kerosene/Jet Fuel (JP54), Liquefied Petroleum Gas (LPG), Liquefied Natural Gas (LNG), Compressed Natural Gas (CNG), Bitumen, ESPO, EN590 , Petroleum Coke , UREA , base oil E.T.C If interested in any of our products listed!!!

Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper.

Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2,
-EN590 10 PPM,
-Diesel D6,
-Diesel 50 PPM.
-BIODIESEL
-Mazut M100
-Bitumen
-Crude Oil
-Copper

We are able to supply multiple kind of petroleum product.
Please read the procedure before you have send any inquiry.

Buyer issues ICPO with banking details, corporate registration certificate and profile, passport copy of authorised representative and proof of fund.

Seller issues draft contract for Buyer to countersign upon acceptance of the terms and conditions which shall be returned immediately.

Buyer triggers Proof of Fund (MT199) to Sellerâ??s fiduciary bank which shall be acknowledged by return SWIFT (MT199).

Within 5 days upon receipt of POF, Seller provides partial proof of product (PPOP) to Buyer for verification;
a) Product Passport (dip test report)
b) Authorisation-to-Sell & Collect (ATSC)
c) Statement of Product Availability
d) Refinery Commitment to Supply Product e) Certificate of Product Origin

Buyer verifies PPOP and issue SBLC (MT700/760/799-Blocked) to Seller nominated bank account within five (05) days as guarantee for the product. In the event of default in the issuance of DLC / BG / SBLC within the grace period, Buyer shall be liable for charges of Storage Tank(s).

Within 5 days upon receipt of payment guarantee, Seller proceed with the Act of Transfer (Change of Ownership Title) from Sellerâ??s name to Buyerâ??s name as legal title-holder of the product with the Ministry of Energy.

Simultaneously, Seller appoints and executes charter party agreement (CPA) with the shipping company and sends full proof of product (POP) and shipping documents to Buyer via Bank-to-Bank;
a) Approval to Export (issued by the Ministry of Justice)
b) Tank Storage Receipt
c) Certificate of Conformity
d) Full set of Bill of Lading (03 original copies)
e) Vessel Notice of Readiness (NOR)
f) Vessel Estimated Time of Arrival (ETA)
g) Marine Insurance Certificate
h) Material Safety Data Sheet (MSDS)
i) Vessel Q88 Document
j) Vessel details
k) Ullage Report
l) Cargo Manifest
m) Corporate Invoice

Upon arrival of cargo and after successful SGS/CIQ at discharge port, Buyer makes payment for product delivery to Sellerâ??s Bank via SWIFT Telegraphic Transfer (MT103) within 72 hours.

Seller pays commission to intermediaries as per MFPA within 50 hours.

FOB Rotterdam PROCEDURE (TANK TO TANK)

1. Buyer submits ICPO, TSA and Company Registration Certificate.
2. Seller releases Commercial Invoice.
3. Buyer signs the CI and return to Seller.
4. Seller releases The following PPOP documents to the buyer secure channel:
a. Refinery Commitment and Guarantee to Supply the product
b. Statement of availability of the Product
c. Tank Storage Receipt - TSR
d. Product Passport
5. Upon receipt of the above PPOP documents, within 48 hours buyer present their Tank Storage Receipt - TSR as proof of storage availability.
6. Upon confirmation, seller sends Unconditional Dip Test Authorization (DTA)
7. Buyer conducts dip test in Sellers tanks and Lift the Product.
8. Buyer makes payment via MT103 or Wire transfer By MT103 for the total product available.
9. Buyer Lift the product and Seller pays all the intermediaries involved in the Transaction
10. Seller and Buyer proceed to sign contract for 12 month or more.

FOB APPROVED PROCEDURE (TANK TAKE-OVER)


1. Buyer submits (ICPO) and Company Profile (CP).
2. Seller issues Commercial Invoice (CI).
3. Buyer signs the CI and returns to Seller

4. Seller issues The following PPOP documents to the buyerâ??s secure channel:
a. Refinery Commitment and Guarantee to Supply the product
b. Statement of availability of the Product
c. Tank Storage Receipt - TSR
d. Product Passport
5. Upon receipt of the above PPOP documents, within 48 hours Buyer proceed to contact the seller tank farm company and extend the tank for three (3) days.
6. Buyer conducts dip test in Seller's tanks and Lift the Product.
7. Buyer makes payment via MT103 for the total product injected into its tank as agreed and Seller issues to Buyer Title Transfer & Change of Ownership Certificate of the product.
8. Seller pays intermediaries involved within 48 hours after receipt and confirmation of the product payment.
9. Upon satisfaction by Buyer, both Buyer and Seller sign contract for month delivery with rolls and extension.

If the procedures are suitable for you, please do not hesitate to contact us for further details.

ICPO should be addressed to: End Seller via Gulliver Group Ltd.

Hello Everyone, We proudly represent a highly reputable and proficient seller,� a major refinery supplier with a stellar track record of excellence. The outstanding performance of our refinery partner speaks volumes about their credibility and capability. If you have a ready and capable buyer, rest assured, we have the perfect foundation for a mutually beneficial deal.
For a copy of our standard port authority-approved SCO, which includes pricing, seller procedures, product origins, and other relevant details, please reach out to us via:


Looking forward to hearing from you!

Hello Everyone, We proudly represent a highly reputable and proficient seller, a major refinery supplier with a stellar track record of excellence. The outstanding performance of our refinery partner speaks volumes about their credibility and capability. If you have a ready and capable buyer, rest assured, we have the perfect foundation for a mutually beneficial deal.
For a copy of our standard port authority-approved SCO, which includes pricing, seller procedures, product origins, and other relevant details, please reach out to us via:


Looking forward to hearing from you!

Product Description: JP54 Jet Fuel High-Performance Aviation Turbine Fuel

Premium JP54 (Jet A-1 Equivalent) for Global Aviation Operations

We supply JP54 jet fuel, a high-quality aviation turbine fuel meeting international standards for commercial, military, and cargo aircraft. With excellent cold flow properties and thermal stability, JP54 ensures safe, efficient, and reliable performance for all jet engine operations.

Key Features & Benefits:

High Flash Point & Low Freeze Point (47°C) Ensures optimal performance in extreme altitudes and temperatures.
Low Sulfur Content Complies with ISO 8217, DEF STAN 91-91, and ASTM D1655 standards for clean combustion.
Superior Thermal Stability Reduces deposit formation in engines for longer operational life.
Global Availability Sourced from trusted refineries with seamless logistics (FOB, CIF, or ex-tank delivery).
Strict Quality Control Batch-tested for density, flash point, viscosity, and contaminants (SGS inspected).

Applications:

Commercial Airlines Primary fuel for passenger and cargo jets.
Military Aviation Used in tactical and transport aircraft.
Private & Charter Jets Reliable performance for business and VIP travel.
Helicopters & Turboprop Engines Compatible with mixed-fleet operations.

Technical Specifications:

Grade: JP54 (similar to Jet A-1 with minor regional variations)
Composition: Kerosene-based, hydrotreated
Energy Density: ~43.15 MJ/kg
Flash Point: 38°C
Aromatics Content: 25%

Why Choose Our JP54 Jet Fuel?

Competitive spot & long-term contracts with volume discounts.
Documentation & Compliance: Full specs, MSDS, and ASTM reports provided.
Strategic Global Supply Chain: Reliable deliveries to airports, depots, and bunkering hubs.

Available for Immediate Purchase

Contact Us for Pricing & Logistics Details!

(Custom agreements available for airlines, defense contractors, and fuel distributors.)

SOFT CORPORATE OFFER

ATTENTION TO BUYER/BUYER REPRESENTATIVES.
Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation

Terms of Negotiation
Origin: Russia Federation
Performance Bond : (Pb) 2% of the First Month Shipment Value Destination Aswp
Incoterms: Fob / Cif / Tto
Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports
Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg or Sblc Mt760, Mt103/23, Mt103
Inspection: Sgs, Ciq or Similar
Insurance: Paid by Seller, Covering 110% of Shipment Value

Aviation Kerosene Jet Fuel Ja1/jp54/ts1
Minimum Liftable Quantity: 1,000,000 Bbl. Maximum 3,000,000 Bbl. Monthly
Pricce Cif: Gross Usd $42.00/usd $40.00 Net Cif
Price F.o.b: Gross Usd $38.00 Bbl Net: Usd $36.00 Bbl
Origin: Russia
Loading Port: Primorsk / Ust-luga/ Rotterdam

CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE

1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration.
2. Seller issues CI to Buyer.
3. Buyer Sign/endorse CI within 48 hours.
4. Seller issue to Buyer following Transaction Documents:
Tank Storage Receipt (TSR Valid 48 hours)
Authorization to inspect (DTA Valid 48 hours)
Authority to Verify (ATV)
5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. NOTE (BUYERâ??S FAILURE TO MAKE DIP TEST WITHIN 48 HOURS, BUYER WILL BEAR THE COST OF FURTHER EXPENSES)
6. Upon successful inspection, Buyer release payment for total product value.
7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.