Ky Twin Screw Extruder

This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.

Hardness after hardending & tempering : hb240~280
Nitrided hardness : hv950~1000
Nitrided case depth : 0.55~0.7mm.

Specifications: 45/90, 45/100,50/105, 51/105, 55/110, 58/124, 60/125, 65/120, 65/132, 68/143, 70/140, 75/150, 80/143, 92/188

The compression ratio of the screw can be designed according to different products and mixtures.

Nitrided Hardness: HV 900-1000
Nitrided Case Depth: 0.45mm-0.7mm
Alloy hardness: HRC50-65
Alloy depth: 0.8mm-2.0mm
Materials: Quality 38CrMoAlA
Advanced nitriding process
Corrosion&Abrasion resistance bimetal spraying process

Parallel twin-screw and barrel used in extruder
Specifications
PX-45/2~150/2
Lenght/Diameter Ratio:L/D=18~25
The compression ratio of the screw can be designed according to different raw materials and products.
Hardness hardness:HV800-1000
Nitrided Case Depth:0.45mm~0.7mm
Alloy Hardness:HRC 50-65
Alloy Depth:0.8mm~2.0mm

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

Parallel twin screw

In wooden case

For shaped profiles, door and window profiles and decorative sheets from PVC

We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments.
Salient Features of co-rotating twin screw extruder EC52:
1) Main motor 55kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 150~200kg/h
5) One mixer, one main feeder and one side feeder
6) One soft water cooling system, one vacuum system and one filter system
7) Strand cutting unit with water bath, air blower, pelletizier and classifier
8) One control panel.

Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.

We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on.
Salient Features of co-rotating twin screw extruder SAT65:
1) Main motor 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-400rpm
4) The output capacity: 150~250kg/h
5) One mixer, one loader and one feeder
6) One soft water cooling system, one vacuum system and one filter system
7) Air cooling die face cutting system with cyclone and classifier
8) One control panel.



Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.