Smoke Visibility Tester

Smoke Density & Visibility Testing Equipment EN 45545-2 Low Visibility Flammability Chambers | KDM Global
KDM Global manufactures advanced Smoke Density and Visibility Testing Equipment designed for accurate evaluation of optical smoke characteristics and reduced visibility under fire conditions. Fully compliant with EN 45545-2, our equipment is ideal for railway applications requiring precise control over low-visibility scenarios, especially for components classified under R22 and R23.

Our solutions include customised machines and complete fire testing lab setup for EN, ISO, and railway fire safety standards.

Key Features Smoke Density & Visibility Test Systems:
EN 45545-2 Compliant Smoke Chamber

Designed to evaluate optical smoke density and light obscuration

Closed chamber test method simulates realistic fire conditions

Supports flaming and non-flaming combustion modes (ISO 5659-based)

Low Visibility Flammability Assessment

Measures percentage transmittance and specific optical density (Ds)

Determines material performance in emergency evacuation scenarios

Suitable for all Hazard Levels (HL1, HL2, HL3) per EN 45545

Infrared and Laser Photometry Options

Dual light source and sensor setup for precise smoke visibility readings

High-resolution real-time data logging and graphical analysis

Customised Machine Configurations

Modular options with FTIR, gas flow control, heat flux customization

Software-integrated systems with user-friendly interface and report generation

Applications:
Railway seat foams, panels, textiles, flooring

Electrical and cable insulation materials

Interior linings and coatings for passenger compartments

Public transport and tunnel-use materials

Fire Testing Lab Setup Solutions
KDM Global provides turnkey support for fire lab setup:

Smoke and visibility chamber installation

Utility planning (exhaust, gas supply, ventilation)

Operator training, test protocols (SOP), and calibration setup

Multi-standard chamber design for ISO, EN, and NCD protocols

Why Choose KDM Global?
Complies with EN 45545-2 smoke density and visibility standards

Trusted for customised machine solutions across transport sectors

Integrated fire testing lab setup with expert engineering support

Proven partner for railway component testing and certification preparation

Indian manufacturer with global export capabilities

Brief introduction

1. Fast processor
Cpu is msm7627 aa and the system adopts android 4.0 ics operating system.
2. Strong protection for bad environment
It can apply to the bad environment, which can resist multiple dropping impact from 1.2m high; apply to ip65 protection grade with good water-proof and dust-proof effect; durable and long life span.
3. Visible 3.5 inch lcd in the sunlight
It is 3.5 inch vertical screen lcd, 480*640 high resolutions; with pressure sensitive touch screen and semi permeable tft lcd readable display. Its particular non glare and reflective technology make the work in the wild sunlight more easy and convenient.
4. The storage capacity is big and extensible
Tf card supports no less than 8g cards, which can basically satisfy regular information and data storage.
It adopts portable change design. There is no need to open the tester and you can remove the battery with the knob. The battery capacity is as high as 6000 mah.
5. Advanced battery installation design and strong endurance
Due to the lithium battery capacity of 6000 mah and low-power design, the duration will be more than 3 days under routine operation.
6. Multi-functional module integration
--the built-in fixed network test module can do adsl test, lan test and modem emulation.
--5 million pixels camera makes the image data collection convenient.
--support bluetooth, which is convenient provide data transmission between any compatible electronic equipment.
--built-in gps module can realize the position location.
--support 1d/2d red light/ laser bar codes scan.
7. Reliable process design
It adopts advanced manufacturing process which is reliable and convenient to assemble.



Paper carton package.

FTIR Smoke Density Tester ISO 5659 + EN 45545-2 Fire Test Equipment | KDM Global

KDM Global presents the FTIR Smoke Density Tester, a state-of-the-art fire test system combining ISO 5659-2 smoke density measurement with EN 45545-2 toxic gas analysis capabilities. This integrated fire testing solution is specially designed for evaluating materials used in railway applications, electrical products, polymers, and building interiors, where both optical smoke behavior and toxic gas emissions are critical to safety.

Built with advanced optics, real-time FTIR gas analysis, and compliance-focused automation, this system is ideal for testing laboratories seeking accreditation under ISO/IEC 17025, BIS, or EN fire safety directives.

Key Features:
Dual-Function Testing Platform
Measures specific optical density of smoke per ISO 5659-2, while simultaneously analyzing toxic gases as required by EN 45545-2 (R1, R2, R22, R23 materials).

Integrated FTIR Analyzer
High-resolution FTIR module detects multiple toxic gases including CO, CO, HCN, NOx, SO, and hydrocarbons in real-time.

Precision Smoke Chamber
Equipped with a sealed testing chamber, laser photometric system, gas sampling interface, and controlled heat flux (25 kW/m�² and 50 kW/m�²).

Standards-Compliant Design
Conforms to ISO 5659-2, EN 45545-2, ASTM E662, and related test protocols for transport and construction material fire testing.

Software-Controlled Operation
Fully automated system with programmable test cycles, data acquisition, trend graphs, and formatted compliance reports.

Ideal Applications:
EN 45545-2 Railway Interior Fire Testing

Smoke & Gas Performance of Cables and Electrical Panels

Plastic, Foam, and Composite Material Testing

Construction Product Fire Rating (walls, ceilings, panels)

Automotive and Aerospace Interior Testing Labs

Benefits:
Consolidates two critical fire testing methods into one efficient system

Reduces operator error with automation and calibration checks

Designed for quick setup and smooth integration into new or existing labs

Trusted by OEMs, test houses, and R&D centers across India and abroad

KDM Globals FTIR Smoke Density Tester helps fire testing laboratories meet the increasing demand for accurate, standards-based fire and toxicity testing. Whether you're preparing for EN 45545-2 certification or aiming for broader material fire safety validation, this system delivers the reliability, precision, and compliance your lab needs.

Let me know if you'd like a version optimized for local targeting (e.g., FTIR Smoke Tester Manufacturer in India) or formatted for marketplace listings.

FTIR Smoke Density Tester - ISO 5659 + EN 45545-2 Fire Test Equipment | KDM Global
KDM Global offers the advanced FTIR Smoke Density Tester designed for combined smoke generation and toxic gas emission analysis in accordance with ISO 5659-2 and EN 45545-2 Annex C. This integrated system enables accurate fire behavior testing of materials used in railway coaches, metros, electrical cables, and polymer products, supporting compliance with international fire safety standards.

This system is widely used by railway OEMs, fire testing laboratories, certification bodies, and research institutions for qualifying materials under Hazard Levels HL1, HL2, and HL3 as specified in EN 45545-2.

Key Features
ISO 5659-2 Compliant Smoke Chamber
Measures optical smoke density under controlled radiant heat at 25 kW/m² and 50 kW/m².

EN 45545-2 Annex C FTIR Toxic Gas Analysis
Real-time detection of toxic gases such as CO, CO-, HCl, HCN, NO, NO-, SO- using FTIR spectroscopy as per NF X70-100 standard.

ASTM E662 Support
Capable of non-flaming and flaming mode testing for cable jackets, polymers, and plastics.

Fully Integrated Software
Automated gas quantification, spectral data logging, smoke curve generation, and CIT (Conventional Index of Toxicity) calculation.

Dual-Function Setup
One compact unit handles both smoke and toxicity evaluation-space-efficient and cost-effective.

Applications
Fire safety qualification of railway interior materials (EN 45545-2 HL1/HL2/HL3)

Metro coach lining, insulation, and seating material testing

Electrical wire, cable sheath, duct, and foam product fire testing

Plastic and polymer component R&D and compliance verification

Type approval and third-party certification lab usage

Compliance Standards
EN 45545-2 (Annex C) - Toxicity testing for railway interiors

ISO 5659-2 - Smoke density testing for materials

ASTM E662 - Smoke emission testing from plastics

NF X70-100 - FTIR gas analysis protocol

Optional integration with Cone Calorimeter (ISO 5660-1)

Why Choose KDM Global?
Manufacturer of ISO, EN, ASTM compliant fire testing equipment

Expert in railway and metro fire testing solutions

Turnkey support: layout design, installation, training, calibration

Successfully installed at Indian Railways units, metro coach factories, and private labs

Export-ready machines with CE marking and international documentation

Complete Railway Flammability Testing Equipment - EN 45545-2 Fire Safety Solutions | KDM Global
KDM Global offers a comprehensive suite of Railway Flammability Testing Equipment built to meet the stringent safety requirements of EN 45545-2. Our complete solutions are designed for the fire testing of railway interior materials, ensuring compliance with hazard levels HL1, HL2, and HL3 across all key test parameters including flammability, smoke generation, heat release, and toxic gas emission.

Integrated Fire Testing System for Railways
Our railway fire testing equipment range covers all essential tests required under EN 45545-2:

ISO 5660 Cone Calorimeter: Measures heat release rate (HRR), total smoke production, and combustion behavior of interior materials.

ISO 5659-2 Smoke Density Tester: Simulates low-visibility conditions and quantifies optical smoke density.

FTIR Gas Analyzer (NCD 1409 Compliant): Identifies and measures toxic gases such as CO, CO , HCN, HCl, NOx.

ISO 11925-2 Small Flame Ignitability Tester: Evaluates ignition behavior of vertically mounted samples under a small flame.

EN 1363/BS 476 Fire Resistance Chambers: Tests full-scale panels and constructions for fire propagation and insulation integrity.

Applications
Interior paneling, seat materials, floor finishes, cable insulation, coatings, and foams used in passenger coaches, metros, and locomotives.

Used by railcar manufacturers, fire testing laboratories, regulatory bodies, and component suppliers.

Why KDM Global?
All systems are calibrated, automated, and designed for long-term precision testing.

Expert support, installation, and standard-compliance training included.

Built to ensure conformity with EN 45545-2 fire protection requirements.

A single led die can only emit monochromatic light which could be one of the three primary colors - red, green and blue, known as rgb.

Characteristics:
Unique design, wide light angle
Creative design on heat dissipation
Strict quality control on material, attenuation ratio on r/g/b consistent
Energy saving, eco-friendly and cost-effective
gital device
Remote control car and airplane etc

A single LED die can only emit monochromatic light which could be one of the three primary colors - red, green and blue, known as RGB.
Features:
Unique design, wide light angle
Creative design on heat dissipation
Strict quality control on material, Attenuation ratio on R/G/B consistent
Energy saving, eco-friendly and cost-effective
Application:
Billboard, sign, and stage lighting
Mobile phone, digital device
Remote control car and airplane etc¡­

A single LED die can only emit monochromatic light which could be one of the three primary colors - red, green and blue, known as RGB.
Features:
Unique design, wide light angle
Creative design on heat dissipation
Strict quality control on material, Attenuation ratio on R/G/B consistent
Energy saving, eco-friendly and cost-effective
Application:
Billboard, sign, and stage lighting
Mobile phone, digital device
Remote control car and airplane etc.

A single LED die can only emit monochromatic light which could be one of the three primary colors - red, green and blue, known as RGB.
Features:
Unique design, wide light angle
Creative design on heat dissipation
Strict quality control on material, Attenuation ratio on R/G/B consistent
Energy saving, eco-friendly and cost-effective
Application:
Billboard, sign, and stage lighting
Mobile phone, digital device
Remote control car and airplane etc.