Please click here to check who's online and chat with them.

Infrared Converter Slag Detection System

(1.0)
Supplier From China
Aug-26-22

LAG-S400 Infrared Converter Slag Detection System



Overview

The infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of converter tapping in real time, and is connected to the main control computer in the electrical room through the conversion and transmission of video signals. The radiation intensity in the infrared wavelength range of 7-14um is different to distinguish molten steel and slag. In the later stage of the converter tapping, the molten steel gradually decreases, and the steelmaking slag is involved in the molten steel and flows out of the tapping hole. After the thermal imager recognizes the steelmaking slag in the imaging temperature measurement, it will give an alarm according to the slag content ratio threshold set by the software. The thermal imager will start the slide plate to close the tapping hole, so as to realize the control of the slag in the converter tapping, and ensure the maximum yield of molten steel and the minimum control of the steelmaking slag content.

The effect of slag detection in converter tapping is of great significance to the control effect of the slag amount. The converter slag detection and control system developed by our company conducts non-contact monitoring of the tapping steel flow through the far-infrared detector thermal imager. It can detect the slag condition in real time and output an alarm signal and control system, which can replace manual visual inspection and provide accurate, efficient and stable slag detection effect. When the system finds the slag, the intelligent control unit quickly makes a judgment of lifting the furnace and blocking the slag and outputs an alarm signal.

As shown in Figure 1, the system includes thermal imager, front purge protection box, front electrical box, power distribution cabinet, main control monitor, monitor of rocking furnace chamber, sound and light alarm, infrared converter slag monitoring software system, etc.


The technical parameters

1. Temperature measurement range: 200-1800

2. Temperature measurement accuracy: 2%

3. Detection accuracy and alarm accuracy: 98%

4. Resolution: 0.5

5. Pixels: 640x240

6. Band: 7~14um

8. Frame rate: 25 frames/sec

9. Equipment service life: 5 years

10. The normal operation rate of the automatic control system 99%

Price and Minimum Quantity

Price: $5000
MOQ: Not Specified
File a complaint
Rate This Member
Supplier Of Laser Equipments & Products   |   Welding & Wire Mesh Machinery   |   Slag

Recent User Reviews

This user has not received any reviews yet!

Verification Status

 
 
Contact Supplier
Renew

More Items Similiar to: Infrared Converter Slag Detection System

GOLD Member
VERIFIED
Jan-15-20
Processed Desulphurised Slag

Processed Desulphurised Slag

(5.0)
Ask for price
MOQ: 200  Meters
  European Recycle Ltd.
Supplier From Southampton, United Kingdom
Supplier Of Slag
 
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.

The level of Fe% in the slag has been estimated by water displacement test.

This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;

The material can be loaded loose in 20 heavy duty container.

For further details feel free to contact us.
GOLD Member
VERIFIED
Nov-15-19
Processed Skim Iron Slag

Processed Skim Iron Slag

(5.0)
Ask for price
MOQ: 150  Meters
  European Recycle Ltd.
Supplier From Southampton, United Kingdom
Supplier Of Slag
 
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag

- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
GOLD Member
VERIFIED
Jan-09-21
Cast Iron Slag

Cast Iron Slag

(5.0)
$230
MOQ: 150  Metric Tonnes
  European Recycle Ltd.
Supplier From Southampton, United Kingdom
Supplier Of Slag
 
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.

Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm

Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.

Packing: Loose in container

Loading: in 20 Container

For further information, please feel free to contact us.
GOLD Member
VERIFIED
Dec-12-18
Processed Skim Iron Slag

Processed Skim Iron Slag

(5.0)
Ask for price
MOQ: 150  Meters
  European Recycle Ltd.
Supplier From Southampton, United Kingdom
Supplier Of Slag
 
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction

The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
GOLD Member
Feb-27-25
Slag Black

Slag Black

(4.7)
Ask for price
MOQ: Not Specified
  Raar Group USA LLC
Supplier From Sheridan, Wyoming, United States
Supplier Of Slag
 
CHEMICAL COMPOSITION ELEMENTS CaO% MgO% SiO2% Al2O3% TFe% MnO% Cr2O3% P2O5% S%
MIN 24.00 3.50 10.00 2.00 11.00 0.02 0.00 0.02 0.05
MAX 49.00 25.00 28.00 12.00 36.00 2.50 0.80 0.42 0.20
TYPICAL 39.20 12.20 16.80 4.60 21.70 1.25 0.12 0.28 0.12

PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color

CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.

Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;

NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
GOLD Member
VERIFIED
Jun-26-21
Copper Slag

Copper Slag

(4.8)
Ask for price
MOQ: Not Specified
  Emarc India
Supplier From Faridabad, Haryana, India
Supplier Of Slag
 
We are supplier and exporter of Copper Slag.

Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes

Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
GOLD Member
VERIFIED
Oct-21-14
(5.0)
Supplier From Southampton, United Kingdom

Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)

Supplier Of Aluminium Scrap   |   Metal Products   |   Slag   |   Metal Scraps   |   Other Ores & Minerals
GOLD Member
Jan-03-23
Slag

Slag

(4.1)
Ask for price
MOQ: 1000  Metric Tonnes
  A&BC Trading & Consulting Co.
Supplier From Izmir, Turkey
Supplier Of Slag
 
ggbfs or steel slag
GOLD Member
Aug-30-14
(4.8)
Supplier From Himatnagar, Gujarat, India

Supplier: Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours

Supplier Of Feldspar   |   Slag   |   Other Ores & Minerals   |   Zirconium   |   Fly Ash
Search More Like "Infrared Converter Slag Detection System"

Verification Status

go4WorldBusiness +91-89298-00770 52B, First Floor, Okhla Phase-3 New Delhi, INDIA 110020
© go4WorldBusiness.com