Size Range: DN40-DN1000
Allowable Operating Pressure: PN10,PN16,PN25
Maximum Temperature: 80â??
Valve design: BS5163,EN1074
Face to face: BS5163, EN558-1 Series 3.
End Flange: EN1092 PN10,PN16,PN25, ISO7005-2
Hydraulic test according to EN12266,ISO5208
Operatorï¼? Hand wheel, Gear Box, Electric Actuator, Pneumatic Actuator
BS5163 Resilient Seated Gate Valve Rubber Soft Sluice Valve
Diameter DN50-DN1200
Connection Flange
Working pressure 1.0Mpa/1.6Mpa
Temperature 0-80
Used Water system
Material
Body Ductile Iron
Stem SS420
Wedge Ductile Iron+EPDM
Stem Nut Brass
Product : D.I. Resilient Seated Gate/Sluice Valve
Pressure Rating : PN-16
Pressure Description : DI Sluice Valve, Non Rising Stem Resilient Soft Seated
Type of Wedge : DI+EPDM
Trim : AISI-420
Gland Packing : O Ring NBR
End Details : Flanged as per IS-1538 R/F Drilled
Testing & Certiication
Body Test Pressure : 2.4MPa Hyd.
Seat Test Pressure : 1.6MPa Hyd.
(APS Marines & Logistics)
Fig. No. G4015-V
Size: DN40-DN300 ( OD50-OD315)
Design Standard: EN1074-1.2 ,DIN3352-F5
Face to Face: EN558-1 15 Series, DIN3202-F5.
Socket End according to BS EN12842
Working Pressure: PN10, PN16.
Hydralic Test according to EN12266-1
Material conform to EN-GJS500-7.
Size Range: DN50 PE63 - DN300 PE315
Working Pressure: PN10, PN16
Working Temperature: -10â?? - +80â??
Standards: EN1074, EN 1171
Connection: rubber ring +brass
Operator: Hand wheel, cap, extension spindle etc.
Coating: Inside & outside fusion bonded epoxy
Hydraulic test according to EN 12266, ISO5208
Application: HDPE pipe push on
Size Range: DN40-DN1000
Allowable Operating Pressure: PN10,PN16,PN25
Maximum Temperature: 80â??
Valve design: DIN3352
Face to face: DIN3202 F4,F5, EN558-1 14,15 Series
End Flange: EN1092 PN10,PN16,PN25
Hydraulic test according to EN12266,ISO5208
Operatorï¼? Hand wheel, Gear Box, Electric Actuator, Pneumatic Actuator
Size Range: DN50 PVC63- DN300 PVC315
Working Pressure: PN10, PN16
Working Temperature: -10â?? - +80â??
Standards: EN1074, DIN3352
Socket End: ISO4422
Face to face according to EN 558-1 15 Series
Operator: Hand wheel, gearbox, cap etc.
Coating: Inside & outside fusion bonded epoxy
Hydraulic test according to EN 12266, ISO5208
Application: for PVC-U pipe push on
