Please click here to check who's online and chat with them.

Cooling Generator Insulation Tester

Supplier From China
May-17-21

Product Introduction
Insulation resistance tester dedicated to the measurement of water-cooled generator test but also can be used for laboratory or field testing insulation testing to do. Output current greater than 25mA. The maximum output voltage of 2500V. Includes high-precision micro-current measurement system digital boost system. Just use a high-voltage lines and a signal line connecting the test product can be measured. Automatic measurement the results from the large screen liquid crystal display and store the results.





Product Characteristics
First the main features

1. 32-bit micro-controller Chinese user interface easy to operate.

2. Automatically calculates the absorption ratio and the polarization index and automatically save 15 seconds 1 minute 2 minutes 10 minutes to facilitate analysis of data per minute.

3. Output current (2500V the output is greater than 25mA) short-circuit currents greater than 40mA.

4. A fully enclosed high-voltage generator module technology the protection of the internal resistance safe and reliable.

Anti-interference ability to meet the EHV substation on-site operation.

5. Automatic discharge test is completed and real-time monitoring the discharge process.

Price and Minimum Quantity

Price: $770 - $15397
MOQ: Not Specified

Recent User Reviews

This user has not received any reviews yet!

Verification Status


 
 
Contact Supplier
Renew

More Items Similiar to: Cooling Generator Insulation Tester

GOLD Member
Jan-11-25
Supplier From Jiaxing, Zhejiang Province, China
GOLD Member
Oct-24-24

High Purity Polyvinyl Alcohol Pva 9002-89-5

$2
MOQ: 1000  Kilograms
Sample Available
 
Polyvinyl alcohol is an excellent water-based adhesive. The general product is flake, granular or flocculent. It is not easily� soluble in cold water. Heating is generally required during dissolution. After being finely pulverized and surface treated, it has� better cold water dissolving performance. But because of its thermoplasticity, pulverization becomes particularly difficult. Our� factory adopts a special liquid nitrogen low temperature cooling process to ensure that the powder of the crushed material is� uniform. So that the material has excellent water solubility.
GOLD Member
Apr-29-24

2-Phosphonobutane-1,2,4-Tricarboxylic Acid

$1.20K
MOQ: 1  Metric Tonnes
Sample Available
 
PBTCA is widely used in the formulation of efficient scale and corrosion inhibitors and is one of the best performing products. It is also an excellent stabilizer for zinc salts. Widely used as a corrosion and scale inhibitor in circulating cooling water systems and oilfield water injection systems, it is particularly suitable for use in combination with zinc salts and copolymers. It can be used in high temperature, high hardness, high alkalinity, and situations that require high concentration ratios. PBTCA can be used as a chelating agent and metal cleaning agent in the washing industry. PBTCA is generally used in combination with other water treatment agents such as zinc salts, copolymers, organic phosphines, and azoles; If used alone, the dosage is 5-15mg/L.
GOLD Member
Apr-10-24

Monocaprylin Cas 26402-26-6

$5
MOQ: 1  Kilograms
Sample Available
 
Application

1.Glycerol monocaprylate is a pure plant-derived glycerol fatty acid ester (medium carbon chain). It has good multi-functional properties such as emulsifying, dispersing, anti-corrosion, moisturizing and stabilization. It is safe, gentle and easy to use. It is a multifunctional moisturizer, fatliquor and preservative.

2. Mainly used as auxiliary emulsifier, emollient, moisturizer, natural preservative in cosmetics (such as cream, lotion, microemulsion, etc.). It can effectively maintain oil and water stability. It is a natural, efficient and safe preservative with better corrosion resistance than glycerol monolaurate.

Glyceryl caprylate Packaging and Shipping

Packing: 25kg/drum 200kg/drum

Glyceryl caprylate Storage

This product is non-dangerous. It can be transported and stored according to general chemical materials. It is forbidden to mix with toxic and harmful substances. The product has certain moisture absorption. It should be stored in a sealed way in low temperature, dry, cool and ventilated condition. The shelf life is not open for 24 months.
GOLD Member
Jun-05-24

2,2-Dibromo-2-Cyanoacetamide Cas 10222-01-2

$1
MOQ: 1  Kilograms
Sample Available
 
DBNPA is widely used in industrial circulating water systems, large air-condition, and large centers of sewage treatment to eliminate microorganisms and algae and shuck off clay. DBNPA is also used in the process of paper making to prevent reducing the quality of paper by the generation of microorganisms. DBNPA is suitable for metal cutting of cooling liquor, recovery system of oil, latex, and ply-woods as anti-spy biocides. DBNPA has the following advantages: easy to handle; no unusual oxidation hazards; similar performance and safety in paper and oilfield applications; used for slime control in the wet-end of the paper mill and performs exceptionally well against slime-forming bacteria. DBNPA has exhibited outstanding efficiency against bio-films and a broad spectrum of bacteria, fungi, and yeasts.

Additionally, DBNPA series products are used in the short-term preservation of coatings and coating additives such as latex, starch, and mineral slurries. DBNPA is a fast-acting/quick-kill biocide that is broad-spectrum and does not contain or release formaldehyde.
GOLD Member
Mar-30-24

Acrylamide

$5
MOQ: 1  Kilograms
Sample Available
 
1. Description: It is the raw material for making thermosetting resin, light curing epoxy resin coating, oil resistant coating and drying coating. Its copolymer emulsion is used for fiber finishing, fabric, leather and paper coating. Also used as wood, metal and other adhesives.

2. Typical recipes

Used as crosslinked monomer in acrylic emulsion. The amount of carboxyl-containing acrylic emulsion pressure-sensitive adhesive is L % ~ 2% of the total monomer mass, and the initial adhesion will be greatly reduced if it exceeds 3%. For emulsion adhesives without carboxyl group, the general dosage is not more than 5%. The crosslinking reaction temperature of MMAM alone is high, generally 120 ~ 170�ºC, and the addition of protic catalyst can reduce the crosslinking temperature. Acrylic acid (AA) can both provide hydrogen protons and copolymerize with acrylates, so MMAM should be used as a composite crosslinking agent with AA at a dosage of 3:2. Cross-linking agent HA can replace N- hydroxymethyl acrylamide, and does not contain formaldehyde.

3. Application scope

A. Can be used as crosslinking agent, widely used in fiber modified resin, processing dyes, plastic adhesives, soil stabilizers, etc.

B. Used for fiber modification, resin processing, adhesives and paper, leather, metal surface treatment agent.

Free samples
4. Storage and packaging

A. All emulsions/additives are water-based and there is no risk of explosion when transported.

B. This product can be packed in 25KG,50KG,200KG,1000KG plastic barrels.

C. Store sealed in a cool, dry and ventilated place indoors. Before use, the container should be strictly sealed after each use.

D. The product should be well sealed during transportation, moistureproof, alkali strong acid and rain water and other impurities mixed.
GOLD Member
Mar-28-23
 
Salisbury's Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three C batteries (included).

Features & Benefits: Do not assume conductors that have been tested de-energized will stay de-energized. Always install proper grounding devices before working. Failure to do so may result in serious injury or death. Dimensions in. (mm): 11 x 3.5 ( 279.4 x 89 )
Aug-13-22
Buyer From Coimbatore, Tamil Nadu, India
Aug-30-22
 
Product description

Insulation resistance tester with absorption ratio embedded real-time industrial microcomputer operating system, ultra-thin wire-shaped sheets header with the perfect combination of dot matrix liquid crystal display, the instrument is with a variety of voltage output level (250V,500V,1000V,2500V,5000V,10000V), high capacity, strong anti-interference, the pointer and digital synchronous display, AC-DC dual-use, simple operation, automatic calculation of various insulation index (absorption ratio, polarization index), all measured characteristics with the anti-power-down function .



Technical index

Measuring range and accuracy

(Temperature, humidity: 23RH)

Model

BC2305

Rated

Voltage

250V

500V

1000V

2500V

5000V

Measuring Range

Verification Status