Jet A 1

Product Description - Jet Fuel

Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.

Product origin - Russia - USA

Key Specifications/Special Features - Jet A-1 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene.

Minimum Order Size and Packaging details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month.
Larger monthly quantities are not normal, but can possibly be accommodated.

SORRY, NO SPOT CONTRACTS ACCEPTED "

CGI is direct to the Sellers Mandate
Russian Federation origin
Price: Negotiable (send your sensitive/target price during ordering).
Payment: SBLC/MT760, MT103/23 and TT-Wire.
Loading port: Ust-Luga / Tuapse / Novorossiysk / Nakhodka /
Kozmino, Prigorodnoye - Russia.
Destination: Any Safe World Port (ASWP).
Quantity Min 500.000 Max 5.000.000 Barrels x 12 months

We Supply: Jet A-1, D6, EN 590 ppm 10, and Murray 16

We are not a scam. I will even tell you the refineries we have relationships with.

Jet A-1: $88
EN590: $540
D6:$ .91
HOUSTON/ROTTERDAM
PROCEDURE ON FOB- Jet A-1, D6, and EN 590 ppm 10
TANK TO TANK INJECTION
1. Buyer accepts seller working procedure and issue ICPO addressed to the seller refinery.
2. Seller issues commercial invoice (CI), Buyer signs and returns back commercial invoice and tank storage agreement
(TSA).
3. Seller provide buyer with the below listed PPOP.
A. Product Passport (product analysis report)
B. Irrevocable Commitment Letter to Supplier
C. Tank Storage Receipt (TSR)
D. Tank to Tank Injection Agreement (TTTIA) to be signed by buyer tank farm
4. Seller provide buyer with SGS report, Injection Report, unconditional DTA
5. (NCNDA/IMFPA) will be signed, buyer within 24 hours after successful dip test in seller tanks provide tank storage
receipt (TSR) seller proceed for Tank to Tank injection and provide buyer with the injection report of the product into
buyer tanks.
6. Buyer make payment for total cost of product injected into buyer tanks via MT103, Seller transfer title ownership to
buyer with all exportation documents required of buyer for the transaction.
7. Upon conclusion of first lift transaction seller pays all intermediaries involved in the Transaction and proceeds with the signing of contract with Buyer.

PROCEDURE FOB Houston Texas - TTV/TTT DIP & PAY:
1). The Buyer issues ICPO (including Buyer's passport copy, company registration, bank
details) together with CIS/KYC.
2). Seller issues Commercial invoice (CI) to the Buyer.
3.) The Buyer signs CI and sends it to the Seller along BCL or MT199.
4). The Seller issues to Buyer the PPOP documents listed below on receipt of the signed
Commercial invoice from Buyer:
a. TSR registered with the Port Authority
b. Injection report
c. 24-48 hours SGS report
d. Unconditional Dip Test Authorization (UDTA)
e. Authorization to Verify (ATV) with SGS and with Seller's tank farm
f. Certificate of origin
5). The Buyer arranges to conduct a Dip test in Seller's tank with SGS (or equivalent)
officials and receives fresh SGS report.
6). Upon receiving and verifying the fresh SGS report, if the Buyer approves the result of
Dip test Buyer issues CPA and Q88. Buyer issues NOR.
The Seller releases the Injection scheduling agreement (TTVIA).
7). The Seller injects product into Buyer's vessel(s) or tank.
After successful injection in Buyers' vessel(s) or tank, Buyer pays total cost of product via
MT103.

We have procedures for

Energy Republic supplies certified Jet Fuel A-1, meeting global aviation standards:

Specifications:

Freezing Point: -47�°C (-53�°F)

Flash Point: 38°C (100°F)

Sulfur Content:

Jet fuel, aviation turbine fuel (ATF), or avtur, is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.

AVIATION TURBINE FUEL (JET FUEL) CIVIL JET FUELS

Aviation turbine fuels are used for powering jet and turbo-prop engined aircraft and are not to be confused with Avgas.

Outside former communist areas, there are currently two main grades of turbine fuel in use in civil commercial aviation :

Jet A-1 and Jet A, both are kerosene type fuels.

There is another grade of jet fuel, Jet B which is a wide cut kerosene (a blend of gasoline and kerosene) but it is rarely used except in very cold climates.

JET A-1

Jet A-1 is a kerosene grade of fuel suitable for most turbine engined aircraft. It is produced to a stringent internationally agreed standard, has a flash point above 38C (100F) and a freeze point maximum of -47C. It is widely available outside the U.S.A. Jet A-1 meets the requirements of British specification DEF STAN 91-91 (Jet A-1), (formerly DERD 2494 (AVTUR)), ASTM specification D1655 (Jet A-1) and IATA Guidance Material (Kerosine Type), NATO Code F-35.

JET A

Jet A is a similar kerosene type of fuel, produced to an ASTM specification and normally only available in the U.S.A. It has the same flash point as Jet A-1 but a higher freeze point maximum (-40C). It is supplied against the ASTM D1655 (Jet A) specification.

JET B

Jet B is a distillate covering the naphtha and kerosene fractions. It can be used as an alternative to Jet A-1 but because it is more difficult to handle (higher flammability), there is only significant demand in very cold climates where its better cold weather performance is important. In Canada it is supplied against the Canadian Specification CAN/CGSB 3.23

MILITARY

JP-4

JP-4 is the military equivalent of Jet B with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-4. (As of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-4 also meets the requirements of the British Specification DEF STAN 91-88 AVTAG/FSII (formerly DERD 2454),where FSII stands for Fuel Systems Icing Inhibitor. NATO Code F-40.

JP-5

JP-5 is a high flash point kerosene meeting the requirements of the U.S. Military Specification MIL-DTL-5624U Grade JP-5 (as of Jan 5, 2004, JP-4 and 5 meet the same US Military Specification). JP-5 also meets the requirements of the British Specification DEF STAN 91-86 AVCAT/FSII (formerly DERD 2452). NATO Code F-44.

JP-8

JP-8 is the military equivalent of Jet A-1 with the addition of corrosion inhibitor and anti-icing additives; it meets the requirements of the U.S. Military Specification MIL-DTL-83133E. JP-8 also meets the requirements of the British Specification DEF STAN 91-87 AVTUR/FSII (formerly DERD 2453). NATO Code F-34.

Product Description - Colonial Grade JP-54 considered as the #1 low sulphur jet fuel

Price of product ( USD price or FOB price) - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers.

Product origin - USA - Russia - Korea

Key Specifications/Special Features - JP-54 is used globally in civil aviation gas turbine aircraft, fuel type is Kerosene.

Minimum Order Size and PackaGing details - "First initial trial shipment of One Million bbl, followed by a 12 month contract, with an average monthly shipment of between 2 to 4 million bbl per month.
Larger monthly quantities are not normal, but can possibly be accommodated.

SORRY, NO SPOT CONTRACTS ACCEPTED "

Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition.

Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.