Orthopedic Polymer Splint

G&w is a company which produces all cast & splint applied to orthopedic surgery, and broadened its ground in the market by developing gr cast & gr splint for several researches & developments which are substantially different to the existing cast.
Alpha splint is a semi-cast type of product used for emergency treatments of fractured patients, light fractures, and dislocations (sprains) or other ligament and muscle problems.
It is used to safely support or fix the affected area.

- roll splint (polyester / fiber glass)
- pre-cut splint (polyester / fiber glass)


-

Washable, breathable and fashionable orthopedic casts and splints

10, 000 sets

Ansen fiberglass splint consists of knitted fiberglass fabric and polyethylene glycol. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients.
Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint.


5/10/20bags/box, 6boxes/ctn,
The box dimension is 65*41*40cm

Back supports various designs from trochanter belt to dorsal lumbar.


100 units
80 pounds
Four boxes 30x20x20.

Good X-ray transmission
Good waterproof and moisture resistance
Good waterproof and moisture resistance

Introduction: The polymer fracture splint is a functional polymer, in which the peptide fiber layer is sterilized by ethylene oxide and used in combination with the polymer bandage to achieve a double-effect combination, used for fixation and bandaging of fracture, dislocation, soft tissue injury and other parts.

Outstanding advantages
Good X-ray transmission
Good waterproof and moisture resistance
Good waterproof and moisture resistance

Usage
1.Select the appropriate type of polymer splint according to the required fixed part.
2.Open the packaging (open one bag at a time, not more than one at a time to avoid failure), remove the splint, soak it in room temperature water for 3~4 seconds and squeeze it for 2~3 times.
3.Remove the excess water and wipe off the water droplets on the surface of the splint.
4.Put it on the place that needs to be fixed, shape it, wrap it with gauze bandage or elastic bandage in spiral form, with moderate tightness.

Scope of application
Orthopedic or orthopedic fixation, used for orthopedic, hand surgery fracture, sprain, soft tissue, joint ligament tendon fixation, braking.Production of molds, prosthetic AIDS, protective supports for burns, etc.

Matters needing attention
1.This product is only for use by medical practitioners
2.If more than two bags are needed, open the second bag after using one bag, and do not open the second bag at the same time.
3.Store it in a dry environment at room temperature, and the packaging bag should not leak air to avoid hardening and failure

The high polymer splint is composed of many layers of high polymer fiber soaked by polyurethane and polyester.

Product Details
Introduction
The high polymer splint is composed of many layers of high polymer fiber soaked by polyurethane and polyester.

Feature
High hardness and light weight
Little and light
Equivalent to the 1/5 weight of gesso,1/3 weight of polyester
Smaller load on injured body
Better blood circulation

Advantage
High hardening speed
High strength
Waterproof
Will not cause itching, ulceration and odor.

Method of use
1.Select the appropriate type of polymer splint according to the required fixed part.
2.Open the packaging (open one bag everytimeto avoid failure), remove the splint, soak it in room temperature water for 3~4 seconds and squeeze it for 2~3 times.
3.Remove the excessive water and wipe off the water droplets on the surface of the splint.
4.Put it on the place that needs to be fixed, shape it, wrap it with gauze bandage or elastic bandage in spiral form, with moderate tightness.

Samples Photos

is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.

Sizes: 5.1cm x 450cm , 7.6cm x 450cm , 10.2cm x 450cm , 12.7cm x 450cm
Made: Korea
Brand: Seven cast

Stryker Corporation is a well-known company that produces a variety of medical devices, including surgical instruments and equipment. PEEK (Polyether Ether Ketone) is a high-performance thermoplastic polymer that is used in various medical applications, including surgical instruments.

Here are some general considerations:

Material - PEEK: PEEK is known for its biocompatibility, strength, and resistance to wear and tear. It is commonly used in medical devices due to its advantageous properties.

Monopolar Handle: A monopolar handle is typically part of an electrosurgical system used in various surgical procedures. It is the component that connects to an electrosurgical instrument, allowing the surgeon to control the application of electrical energy during the procedure.

Applications: Instruments with PEEK monopolar handles could be used in a range of surgical specialties, including orthopedics, neurosurgery, and other areas where precision and durability are important.