is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.
Material: fiberglass and water-activated polyurethane.
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model No.: AX002 (5cm*360cm)
Size: standard or customized
Package: 10bags*12boxes/ctn
Characteristics:
1. High Strength and Light Weight.
2. Quick Solidifying and Good Mouldability.
3. Easy Operating.
4. Excellent X-ray Radiolucency.
5. Good Air-permeability.
6. Water-resistant.
7. Environment Friendly Materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Material: fiberglass
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model no.: ax005 (12.5cm*360cm)
Size: standard or customized
Package: 10bags*9boxes/ctn
Characteristics:
1. High strength and light weight.
2. Quick solidifying and good mouldability.
3. Easy operating.
4. Excellent x-ray radiolucency.
5. Good air-permeability.
6. Water-resistant.
7. Environment friendly materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Ansen casting tape consists of knitted fiberglass fabric and polyester fabric. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients.
Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint. We have various size and color for choose.
10bags/box, 12boxes/ctn,
The carton dimension is 65*41*40cm
Enriched with polyurathane resin, our casting tape have good weight bearing strength & 3-4 min setting time, tact free roll down & smoothest finish.
It is dipped in water, squeezed and applied for immoblization. Commonly used by orthopedic doctors.
12 - pieces packed in a small inner box. For small sizes.
10 - pieces packed in a small inner box, for 5".
Outer/bigger box contains 10 small/inner boxes.
Orthopedic Casting Tape
Color Various Casting Tape
Meet ISO 13485, CE, FDA
This product is made of knitted fiberglass fabric or polyester fabric, and water-activated polyurethane resin. It uses environment friendly materials, and mainly used for the external fixation of fracture and common orthopedics.
This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage.
Fiberglass Casting Tape has higher strength and is easier to be cut than Polyester Casting Tape.
Polyester Casting Tape can be burnt thoroughly, so it is more environmentally friendly.
How to use:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, DIP in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Characteristics:
High Strength.
Light Weight.
Quick Solidifying and Good Mouldability.
Easy Operating.
Excellent X-ray Radiolucency.
Good Air-permeability.
Water-resistant.
Environment Friendly Materials.
Clean and Comfort.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
