Ozone Aging Tester

XH-401 two roll mill is mainly used to uniformly mix the raw material and additinal agents for testing and apply the experiment resoults and its ratio in the production line to satisfy the requirement of quality and color specified by the customer.

• Built-in heater,together with LCD temperature controller and high-precision sensor,can automatically compensate the temperature to guarantee the temperature equalization.

• Telfon stop block.

• Taiwang gear motor,together with high-precision gearing chain,guarantees stable operation,low noise and good durability.

• Emergent reverse guarantees the safety.

• Alternative configuration:oil heating and cooling system,AC frequency control system,independent limitless speed change,automatic roller-gap adjustment ande man-machine interface.

• Relyng on the principle of customer-based, the company can customize the product according to the customer's requirements.



450KG 1000*550*1200.

Xh-406 press machine is applicable to r & d in laboraty.Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.This machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving.

• High-performance oil hydraulic system with automatic pressure compensation function can preset the time and pressure between two pressurizations and automatically conduct pressurization and depressurization supplemented with high-precision cylinder.

•high-precision and abration-resistance guide pillar features strong loading force and stable lifting.

•imported kdb electric board features high-temperature resistance, abrasion resistance, fast thermal transmision and strength against deformation.

•high-precison temperature sensor, together with led temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300°c.

•single heating can be designed according to the requirements.

•oil hydraulic system:the pressure range:20 ton, the maximum stroke of the cylinder:140mm.

Technical parameter

Capacity: 10-50 ton or designated

Area of electric board: 300mm x 300mm or designated

Area of colling plate: 300mm x 300mmor designated

Plate spacing: 0-90mm or designated

Timepiece: led 0-99(min)

Temperature controll: normal temperature-300°c

Temperature precision: ±4.5°c

Colling mode: compressor water colling or running water colling

Outside dimention: 1000 x 600 x 1500mm(w x d x h):

Power supply: 3ø, ac380v, 20a

Weight: about 460kg.


460kg, 1000 x 600 x 1500mm(w x d x h).

Ultraviolet Irradiation Crosslinking Equipment
Application of UV-light irradiation cross-linked equipment
The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing.
UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.

5KV Power frequency high-voltage test console
Wire and Cable Detection Equipment
Power Frequency High Voltage Test Console
The power frequency high-voltage test console is designed for finished low-voltage cables, which is composed of the console, a 50KVA induction regulator and an experimental transformer. It has a standard capacity of 50KVA and a voltage of 5KV. The low-voltage cable can generally withstand the voltage of 3.5KV, and the equipment can withstand the voltage of 5KV. The equipment is operated by electric control. In addition, high voltage will automatically return to zero in case of cable break and give a sound-light alarm and leakage protection, so as to protect the safety of the operator and the staff to the most extent.
Main technical parameters of the system:
Rate capacity   50kVA/ 100KVA/ 150KVA/ 200KVA
Rated input voltage  380V
        Rated output voltage  0-5KV/ 0-10KV/ 0-15KV/ 0-20KV/0-25KV
Main technical indicators:
1. It will automatically give an alarm (sound-light) and delay in cutting off high voltage (adjustable from 0.1-1S) in case of test piece breakdown.
2. Zero potential of voltage regulator is started under high voltage.
3. The voltage regulator automatically returns to zero after breakdown, overcurrent protection and non-zero tripping under high voltage.
4. Cut off the power source after the hold-off time is up and voltage automatically returns to zero at the step-up rate.
5. The hold-off time of digital display time relay is adjustable.
6. Measurement accuracy of high-voltage output and current output is +3%.
ã??ã??When low-voltage wires are used in the power frequency withstand voltage test, the equipment with a voltage of 5KV and capacity of 50KVA is usually used.
ã??ã??Voltage capacity may be customized according to customer needs.
We are Cable Detection Equipment Supplier

CP-50 Wire and cable sheet-punching machine
Wire and Cable Detection Equipment
Cable Detection Equipment Supplier
CP-50 type die punching machine is used to punch rubber, plastics, leather and other special materials into test pieces specified in various standards for trial use. In addition, it can also be used as small punch press.

Double Faced Flaker
Wire and Cable Detection Equipment
Cable Detection Equipment Factory
Features and usages:
The machine is widely used in rubber, plastics, leather, wire and cable industries and scientific research units, and is indispensable for the preparation of test pieces. It can be used to cut various test pieces with a Shore hardness above 40 degrees and a thickness of 1-12 mm. The sheet material it cuts has a smooth and flat surface; the dimensional tolerance of thickness can be controlled within ±0.2; it can be used to directly cut the test piece without need for grinding.

II. Technical parameters:
1. Table width: 300mm
2. Slice thickness: 1-12mm
3. Slice width: â?¤100mm
4. Maximum feed thickness: 20mm
5. Motor type: Y100L-8   1.1KW    710r/min     380V
6. Dimensions: LÃ?WÃ?H: 625

Electronic Scale
aluminium cable steel reinforced
automatic calibration Electronic Scale
overload alarm Electronic Scale
Features
Range scale: Large LCD with white light
Highly sensitive tuch-button
Built-in lower lifting hook for weighing
Overload protection scale
Protection lock for transportation of glass sliding door
FA124/FA224 machines are for export

Functions
Quakeproof Grade IV, adjustable weighing speed
Adjustable display mode, dynamic temperature compensation, scaling within full scale
Trackable and adjustable automatic zero position, automatic fault diagnosis, automatic calibration, overload protection and overload alarm function
Counting and weighing function (%) g, ounce, karat and other units for conversion
Weighing range: 200g
Readability: 0.1mg
Repeatability: â?¤±0.1mg
Linearity: â?¤±0.2mg
Scale size: Ï?90mm