Jet Fuel A1

Jet Fuel A1 (JETA1)

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

High-quality aviation turbine fuel meeting international standards for commercial and military aircraft.

Specifications
Specification: Aviation grade

MOQ: 500,000 - 10,000,000 BBLs/Month

Technical Details:
Flash Point: 38 C min
Freezing Point: -47 C max
Density at 15 C: 775-840 kg/m
Sulfur Content: 0.3% mass max
Trading Details
Origin: Republic of Kazakhstan
Incoterms: CIF/FOB
Loading Ports: Port of Aktau, Rotterdam, Houston, etc.
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT
Performance Bond: 2% PB
Contract Term: 12 months minimum (with rolls and extensions)
Inspection: SGS, CIQ or similar

Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*

ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED


*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO

*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.

EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.

2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.

3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.

4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).

5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.

6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).

7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.

8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction

Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE

1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.

3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.

4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.

5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL

(1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan

1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.

Just Jet Fuel A1

JET FUEL A1 Offer
To Whom It May Concern,

We, AHA! CREATE LLC, a producer of responsible industrial commodities, are capable of supplying the following product under the specified terms and procedures:

Product Details


Product: JET FUEL A1 GOST 10227-86_Aviation Turbine (JPA1)
Origin: Kazakhstan, Euro, and others
Payment Terms: T/T, SBLC, DLC
Quantity:100,000 - 10,000,000 BBLS (MOQ: 100,000 MT)
Price:

FOB: US$80 per MT
CIF: US$84 per MT


Incoterm: FOB or CIF
Performance Bond (PB): To be discussed


Trade Terms


FOB: Tank to Tank (TTT)
FOB: Tank to Tank (Dip and Pay)
FOB: Tank to Vessel (TTV)
FOB: Tanker Takeover (TTO)
CIF: Shipping to Discharge Port


Transaction Procedure
(The procedure may change caused by the trade terms.)


NDA: Buyer and Seller side sign a Non-Disclosure Agreement (NDA).
SCO: Seller issues a Soft Corporate Offer (SCO) outlining basic terms and incoterms.
ICPO: Buyer issues an Irrevocable Corporate Purchase Order (ICPO) addressed to the Seller Refinery, along with:

Company profile
Vessel Charter Party Agreement (CPA)
Buyer's passport copy
Stamp & Signature on each page


SPA: Seller issues a Draft Sales & Purchase Agreement (SPA), open for amendments. Once both parties sign and seal the contract, copies are exchanged electronically.
Contract Registration Seller registers and legalizes the contract with appropriate authorities to secure approval for Transfer of Ownership Title/Allocation in the buyer's company name at the seller's expense.
POP Documents: � Seller provides a notarized and insured copy of the legalized contract along with Partial Proof of Product (POP) documents:

Certificate of Origin
Statement of Product Availability
Product Quality Passport
Refinery Guarantee to Supply Letter
Refinery Legalized Draft Contract


Freight Cost Invoice:  Buyer requests an invoice from their nominated Shipping and Logistics company for the chartered freight cost, to be equally shared between Buyer and Seller.
Freight Payment:  Seller and Buyer make the agreed payments for the chartered freight cost to ensure logistics availability and port authorization. Seller's portion of the freight cost will be deducted from the total product payment at the discharge port after final CIQ/SGS testing.
POP & Shipping Documents: Seller releases copies of the following documents to the Buyer:

Charter Party Agreement for product transport
Shipping Schedule Document
Product Analysis Report
Certificate of Origin
Bill of Lading
Tank Receipt
Vessel QM8
Certificate of Product


Payment: Buyer's bank issues an Irrevocable Documentary Letter of Credit (IRDLC) for the full value of the first month's shipment.