Built-in ICR Activate Same Time as Infrared Drive
AGC, AWB and Back Light Compensation Functions (Optional)
3DNR / 2DNR
OSD control (Option)
Megapixels Board LensAStandard 3.6m/m (Optional 6.0¢PA8.0¢P)
WDR Auto
Project Distance 25M
1pc/box, 20pcs/2.72'/13kgs
Intensified alum. Alloy housing to enhance cooling effect
Built-in icr
Megapixels board lens, standard 3.6mm (optional 6.0¢p, 8.0¢p)
3dnr/2dnr
Agc, white balance control and back light compensation functions (optional)
Wdr auto
Using dc 12v power source, ir function activate, project distance approx. 20m
(single cable transmission without ir function)
1pc/box, 20pc/2.72'
Auto electronic shutter
Simple and quick wiring for field or building operation
Power source: applicable for both single cable drive unit/dc 12v
(can only choose one application either single cable drive unit or dc 12v
Brilliant color
High sensitivity
Compact and light weight
Ntsc and pal system
Back light compensation
1pc/box, 20pcs/1.7'
Handle loads up to 7kg
Drive motors provide operational stability with minimum coast
With instant start-stop characteristics
Slow speed¡ahigh-torque motors stand in a low noise level
Pan rotation is controlled by a permanent stop for nearly
355 degree rotation
1pc/box
Sudden light should consistently light up for 45 seconds to shut off Infrared
Color at daytime. Under low illumination or at nighttime, infrared activated immediately and system automatically switched to B/W
Burst signal is switched off while shifting to B/W at nighttime
Auto electronic shutter
High sensitivity
Project distance 30M
1pc/box, 20pc/2.72'
Sudden light should consistently light up for 45 seconds to shut off Infrared
Color at daytime. Under low illumination or at nighttime, infrared activated immediately and system automatically switched to B/W
Burst signal is switched off while shifting to B/W at nighttime
Auto electronic shutter
Y/C separated circuit designed, color signal is off at night
Project distance 15M
17 Pills of high efficient LED
1pc/box, 20pc/2.72'
Allow a single monitor to display the output for one to eight cameras in automatic or manual sequence
Each camera can be positioned in areas where user wants to surveillance
The scene from each camera is displayed on the monitor for an operator-selected dwell time from 1 to 35 seconds. Green led lamps indicate the position number of the camera output bring viewed. Unused camera positions may be bypassed without changing the order of sequence or dwell time
Designed to meet the needs of the small, basic closed-circuit video system user
Housed in a heavy-gauge steel chassis and cover protected by an off-white textured baked enamel finish
CV-123-8A is with Audio
1pc/box, 10pc/2.3'
Auto control / Manual adjustment for desired direction: PAN and TILT are available
Special screw terminal-detachable connector easy for installation
1pc/box, 20pc/2.3'
Built-in zoom lens control and velocity adjustable
A single joystick is easy to control the PAN/TILT scanner
Manual Pan or Autopan is possible
Paddle switch control of Iris, Focus and Zoom Lens are isolated for easy operation
1pc/box, 10pc/2.3'
1CH video input, 6CH output
Circuitry with individual and isolated complementary transistor pairs provides power for several 75 Ohm loads. Channels will not interfere with each other when short circuit occurs.
1pc/box, 10pc/2.3'
Suitable compensation to signal attenuation when the video signal is transmitted for long distance via coaxial cable
0-7 levels adjustable for different signal attenuation and different cable distance
Color Gamma compensation goes along with 0-7 levels
1pc/box, 10pc/2.3'
