MJBZQ-2 Automatic Flute Laminating Machine
This machine adopts automatic feeding for bottom paper, more personalized design, more convenient feeding. It can be used for lamination between cardboard to cardboard, cardboard to corrugated board. This machine has the advantages of simple operation, convenient maintenance, high speed, low noise and high precision etc.
Characteristics:
1. Top sheet forwarded by feeder on high table is designed, the sheet can be piled up to 1.5m
2. Bottom sheet is automatically fed, The two sheets are plied freely, high efficiency
3. The machine is controlled by PLC which made feeding process smoother and more accurate
4. Flexible front positioning can avoid bottom sheet exceeding the top sheet and adjust back and forth lamination of paperboard to bottom paperboard(above 350g/m2),and to A/B/C/D/E flute corrugated cardboard
5. Automatic pasting mechanism to economize the economzie the paste consumption.
Main Technological Parameters
Model
Max.sheet size
Min.sheet size
Total power
Speed
Weight
Measurement
MJBZQ-2-1100E
1100¡Á1100mm
350¡Á350mm
9kw
0-90m/min
3500kg
8700¡Á1900¡Á2400mm
MJBZQ-2-1300E
1300¡Á1100mm
350¡Á350mm
9kw
0-90m/min
4500kg
8700¡Á2000¡Á2400mm
MJBZQ-2-1450E
1450¡Á1100mm
350¡Á350mm
10kw
0-90m/min
5000kg
8700¡Á2100¡Á2400mm
MJRY-2 Creasing and Die-cutting Machine (With Inverter For adjust the speed)
It is a kind of special equipment for all assortments of common card boards, corrugated boards, plastic sheets, leather products. It is suitable for printing, packing, decorating, plastic industries etc. with the features of firm structure, exquisite marking, greet cutting, high precision, ease of operation, safety and reliability etc. This Series Creasing and Die-cutting machine use Inverter to adjust the speed.
MJTJ-3-750, 930, 1040, 1100, 1200 Hot Stamping and Cutting Machine
The series of model TYMB gilding, cutting & mark pressurized machine is product of new generation with clockwork precision and marked effect. It is used for gilding-printing all kinds of colored electro-chemical aluminum, marking a concave-convex die-cutting pictures, trade mark, advertisement of sample, boxes, cover of books and new year card, highly decorations and printing materials. It is the optimum equipment for printing, packing, decoration and plastic industries with materials including paper, cardboard, plastic, leather matters.
Characteristics
It adopts high quality material and high tension of casting
It adopts four-shaft bevel wheel structure with steady operation, great cutting, low noise.
Sound and layout of its height, great angle of frame.
Electrical system is designed according to IEC standard.
It has three functions for single slitting, successive slitting, time delay. Its can be adjusted.
Safety protection system is reliable.
Concentrated lubricating system.
Main Specification
Model
Max.Platen Working Area
Max.Gilding Printing Area
Skip Order Range
Working Pressure
Foil-delivered Length
Foil-delivered Group
Working Speed
Main Motor
Overall Power
Overall Dimensions
Total Weight
TYMB750
750*520mm
740*510mm
Built-in Processing With Computer
100T
500mm
2groups
1380Time/h
2.2kw
10kw
2150*1400*1900mm
2500kg
TYMB930
930*670mm
920*660mm
Built-in Processing With Computer
170T
640mm
3groups
1320Time/h
4kw
13kw
2200*2000*1950mm
3500kg
TYMB1040
1020*700mm
1020*700mm
Built-in Processing With Computer
170T
700mm
3groups
1320Time/h
4kw
13kw
2230*2100*2000mm
4500kg
TYMB1100
1080*780mm
1080*780mm
Built-in Processing With Computer
220T
800mm
3groups
1200Time/h
5.5kw
19kw
2250*2200*2000mm
5000kg
TYMB1200
1180*800mm
1180*800mm
Built-in Processing With Computer
220T
800mm
3groups.
MJRJ-5 Series Die-cutting and Creasing Machine 1600-1800
Introduction
MJRJ-5 Series Die-Cutting and Creasing Machine is the special equipment for die cutting and creasing many different kind sheet shape materials. Such as hard paperboard, corrugated paperboard, plastic, leather and so on. It is widely used in printing, packing and decorating industry. Our companie¡¯s product with its high-quality and competitive price are popular by our customers all over the world.
Characteristics
1. Sliding bearings are made of high quality alloy cooper, thus to get effect of anti-friction and shake reducing.
2. Flywheel is with big moment of force and large pressure.
3. High strength due to one piece casting by using top-ranking material for machine body.
4. Single plate electromagnetic clutch is sensitive and reliable.
5. Have functions of single cutting and creasing, continuous cutting and creasing and time-lapse opening, time-lapse range is adjustable.
6. Operation height is reasonable designed, the opening corner of the moving-bed is big.
7. Focus lubrication system makes the machine can lubricate very well, and reduce the abrasion.
8. Safety system is reliable.
Technological Parameters
Model
MJRJ-5-1600
MJRJ-5-1800
Max. die-cutting and creasing area
1600*1250mm
1800*1400mm
Working speed
16¡À2 strokes/min
16¡À2 strokes /min
Max. Rule length
<50m
<62m
Power
11kw
11kw
Weight
11500kg
13500kg
Machine Size (L*W*H)
2170*2560*2230mm
2240*2800*2130mm
MJNC-3 Automatic Double NC cutoff
1. Features
AC servo cutting system
Automatic synchronization of cardboard¡¯s speed; fixed length cut ¨Coff as its basic function; Automatic order change; Italian branded permanent magnet synchronous AC servo motor and German branded servo controller adopted for high efficiency and precision cutoff.
Optional color mark tracking system is used if preprinted liner paper is put into production.
VF control of feed-in and feed-out
Variable frequency motor and inverter control used for cardboards¡¯ feed-in and feed-out on this machine. Timing belt transmission; PU wheels used for cardboard pressing at feeding; Automatic synchronization of conveying speed and cardboard real speed.
Touch-screen monitor
Standard 5.7 touch-screen monitor and friendly HMI on operator console is used for on-site operating.
Superior working conditions
Individual sealed control cabinet; equipped with industrial air-conditioning system; Dust-free, constant temperature and humidity working conditions ensures longer life-span of electrical components.
Stability and reliability
High-quality raw materials, strict heat treatment, high-precision mechanical processing, ensures stable operation of equipment on the long run.
Use of international branded electrical, pneumatic components, standard parts, ensures high reliability and long service life.
High automation
High-automatic running and control, improve the efficiency, save labors, and reduce labor intensity
CE approval.
Our products are designed and constructed strictly according to CE standards and have obtained CE approval via SGS.
2. Technical specifications
Max. Speed
150,200,250m/min
Effective width
1800,2200,2500mm
Cutting precision
¡À1mm
Cutting length
500~9999mm
Right-angle Conveyor and Stacker
Charateristics:
* Automatically stack and collect the paperboard.
* Pneumatic control the transversely output of paperboard, electrical ouput.
* Vertical paperboard collecting use width belt for transportation.
* When the paperboard stack to required height, the paperboard is output by switch controlled.
Technological Parameters:
1.Speed: 60-80m/min.
2. Working width:1600mm.
3. Max. Length of paperboard: 2400 mm.
4. Max.Height of paperboard: 200 mm.
5. Gas: 0.4—0.9Mpa.
6. Steam Pressure: 0.8—1.3Mpa.
7. Operation direction: Left or right (design as customer’s workshop.)
Diameter of the rolls:
1. Belt roll: Ø86mm, Surface of roll is chromeplated and polished.
2.Transversely output roll: Ø124mm Surface of roll is chromeplated and polished.
Drive Power:
Main transport motor: 0.75KW 380V 50HZ
Transversely output motor: 0.55KW 380V 50HZ
Running power: 0.55KW 380V 50HZ
Main outsourcing parts, materials and origin
Name
Brand & Origin
Material
Motor
Jiangsu Deyi
Electrical elements
Delixi, Chint
Pneumatic elements
Tian Ao
Proximate Matter
Tangshan
10#,12# Channel steel
Transport belt
Own city
Bearing
Shenzhen HWL or Wanxiang
Sealmaster
Anhui Qianshan, Wanshan brand
MJRS-1 Hydraulic Mill Roll Stand
1) The sturcture is double rotary shafts with four arms; Support two paper mill rolls on both arms at the same time.
2) Hydraulic control for paper mill roller up-down, clamp-open and centering. Or motorized clamp-open and centering.
3) Using multi-point brake which imports from Italy and automatic expansion springiness chucks , Reduce paper waste.
4) Effective width:1400mm-2800mm.
5) Maximum paper roll diameter:¦Õ1500mm.
6) Maximum support weight: 7T.
7) Main axis:¦Õ270mm
HS CODE: 844180900
MJZX-2 Semi-auto Carton Gluer Machine
Introduction:
Semi-auto Carton Gluer Machine is new machine for carton production in recent years. It is mainly used for the glue of the carton. It can glue for 3-layer, 5-layer, 7-layer paperboard and so on. The machine structure is easy, working is stable, operation is simple, production efficiency is high, gluing quality is good, production cost is very low. The cost is 15times lower than steel wire stitcher machine.
Machine structure: Machine frame, up and down working-table, front transport equipment, front revising equipment, middle transport equipment, middle press equipment, finished product side output equipment, electrical control equipment.
Characteristics:
Easy and reliable operation system.
Novel design of the whole machine.
High-speed changing sizes.
Automatically counting and strap setting.
Technological Parameters:
Model
MJZXJ-2
Max. Size (L+W)*2
2460mm
Min. Size (L+W)*2
340mm
Max. Size (W+H)*2
1515mm
Min. Size (W+H)*2
240mm
Paperboard feeding height
900mm
Power
2.2kw
Mechanical Speed
40m/min
Machine Packing Size
4.5*1.95*2.0m
Machine Weight
2000KG
Note: We can produce different size machine as customer¡¯s requirements.
MJMQ-3 Rotatory Die-Cutting Machine
(Chain model)
Front Photo Back and side Photo
Introduction
MJMQ-3 Series Rotatory Die-cutting Machine is driven by chain. It is used for die-cutting corrugated paperboard and different kind atypic packages. The advantage of the machine is high efficiency, power save, good safety and so on. This machine use PU roller cover which is imported from Taiwan, the usage life is more than 10million times. The machine has the function of automatically line-speed compensation, this function makes the die-cutting size of the paperboard is exactly right even when the roller cover is attrited. The renovate structure 3times prolongs the life of the roller cover. The feeding system use chain transport. The operation and usage is very easy.
Die-cutting part:
1) The roller uses high-grade steel, surface is abrasive with hard chromeplated.
2) Automatically revise the parallel, running stably.
3) Use PU roller cover which is imported from Taiwan.
4) The rubber roller have transverse 50mm moving system.
5) Automatic compensation of the line-speed means: the automatic compensation structure makes each batch carton size same after die-cutting without worker¡¯s operation.
6)The roller cover can automatically rehab, this prolongs the use life of the roller.
Technological Parameters
Model
Max. Paperboard size(mm)
Min. Paperboard size(mm)
Thickness(mm)
Main Power(kw)
MJMQ-3-1600B
1600¡Á1350
300¡Á500
1-8(3-5layer)
4.0
MJMQ-3-1800B
1800¡Á1350
300¡Á600
1-8(3-5 layer)
5.5
MJMQ-3-2000B
2000¡Á1600
400¡Á600
1-8(3-5 layer)
7.5
MJMQ-3-2400B
2400¡Á1600
400¡Á700
1-10(3-7 layer)
7.5
MJKC-1 Series Paperboard Cutting, Pressing Line, Slotting & Cutting corner Machine
Introduction
MJKC-1 Series Paperboard Cutting, Pressing Line, Slotting & Cutting corner Machine is and integrated machine used for the cutting, slotting, pressing line and corner cutting of corrugated paperboard. Its special characteristics are high production efficiency, good quality and easy operation. (We can also add the function of holing and carton window on this machine.)
Technological Parameters
Model
Max. Paperboard size (mm)
Min. Paperboard size (mm)
Slotting Depth (mm)
Work Speed (m/min)
MJKC-1-1800
1750¡Á1470
650¡Á350
500
0-80
MJKC-1-2000
1950¡Á1470
650¡Á350
500
0-80
MJKC-1-2200
2150¡Á1470
650¡Á350
650
0-80
MJKC-1-2400
2350¡Á1470
650¡Á350
650
0-80
MJKC-1-2600
2550¡Á1470
650¡Á350
650
0-80
MJBD-2 Thin Blade
(Paperboard Slitter and Scorer)
Introduction
The Thin Blade (Paperboard slitting and pressing line machines) produced by our company is good appearance, good structure, with good design, easy to operation, easy to maintenance, and with competitive price.
The paperboard slitting and pressing machine use thin blade to cutting, the edge of the knives are very sharp, this makes the paperboard after cutting are very good edge, this improves the appearance and quality of the paperboard. Make the paperboard easier for entering printer machine, and improves the quality of the carton. The design of this machine use pressing and pulling paperboard with double wheels, can change wheels base. This means the machines can press and slitting, also can pull paper in front and back, can slitting stably. This is perfect machines for manufacturers of cartons.
Technological Parameters
Model
MJBD-2-1800
MJBD-2-2000
MJBD-2-2200
MJBD-2-2400
Max paperboard size (mm)
1700
1900
2100
2300
Max mechanical speed
100pcs/min
100pcs/min
100pcs/min
100pcs/min
Blade knives
4 knives
4 knives
4 knives
4 knives
Presslines
6 pairs
6 pairs
6 pairs
6 pairs
Min slitting width (mm)
130
130
130
130
Min pressing width (mm)
30
30
30
30
Outer diameter of the thin blade
220mm or 200mm
220mm or 200mm
220mm or 200mm
220mm or 200mm
Thickness of the thin blade
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
1.2mm(steel), 1.4mm (alloy)
Power
4.0KW
4.0KW
4.0KW
4.0KW
Pneumatic pressure
<0.4mpa
<0.4mpa
<0.4mpa
<0.4mpa
Machine size (mm)
2400¡Á1600¡Á1500
2600¡Á1600¡Á1500
3000¡Á1600¡Á1500
3200¡Á1600¡Á1500
Machine Weight (kg)
1250
1550
1950
2500
Note: For both of above types Thin Blade, you can choose the quantity of knives and press lines. For the sizes, we can make as customer¡¯s requirement.
MJSF-320FX Single Facer
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Characteristics:
* Paper leading with Vacuum absorb model, have high-pressure & strong fan motor. The flow of fan can be adjusted, and have silencer; The electric control system fastens on a electrical case, which has min. 1.5meter distance from equipments, the operation side is completely independent.
* Gimble drive system, separated structure and independent drive case. Closed gear drive system with oiling lubrication, the usage life of the gears is highly prolonged.
* Machine base and wallboard is cast iron structure, thickness of the wallboard is 180mm.
* Corrugated Roll: Material of corrugated roll is 52CrMo alloy, which is dealt with quench, surface polish. Diameter of roll is Ø 320mm, surface hardness is more than HRC60. The adjust of up and down of roll is pneumatic controlled.
* Press roll: Diameter is Ø320mm, surface is worn down and chromeplated. The adjust of up and down of roll is pneumatic controlled, material is Carbon Iron 45#, dealt with confection.
* Pre-heater Roll: Diameter is Ø400mm, surface is worn down and chromeplated. All are connect with soft metal pipe.
* The bearing of corrugated roll and press roll are lubricated and high-temperature resistant.
* Glue supply and quit is pneumatic controlled, diameter of glue roll is Ø240mm, surface of roll has concave netted rind, surface polish & chromeplated. Surface of adjust roll is surface polish & chromeplated.
* Use electrical glue separate equipments, the glue part can run independently when the main motor stops, this can avoid the dry of the glue.(Choose by customer.)
* Middle height of corrugated roll is 0.10mm, middle height of press roll is 0.075mm. Have place limit equipment, diameter of tighten cylinder is Ø160mm.
Technological Parameters:
1. Working width: 1600mm, 1800mm, 2000mm,2200mm.
2. Design speed: 120m/min.
3. Operation direction: Left or right (design as customer’s workshop.)
4. Gas: 0.4-0.9Mpa.
5. Steam pressure: 0.8-1.3Mpa.
6. Flute: UV or UVV model, can design as customer’s requirement.
Diameter of the rolls:
1. Corrugated Roll: Ø320 mm
2. Press Roll: Ø320 mm
3. Gluing Roll: Ø240 mm
4. Pre-heating Roll: Ø400 mm
Drive Power:
1) Main Motor: 11KW, 380V, 50HZ
2) Fan Motor: 15KW, 380V, 50HZ
MJT model 3-Layer Corrugated Paperboard production Line
Introduction
Corrugated cardboard production line includes mill roll stand, single facer, pre-heater, conveyer bridge, gluing machine, slitter scorer machine, cut off machine and stacker. We can produce the three ply, five ply and seven ply corrugated cardboard production line, Widths from 1400 to 2500mm\min,production speeds from 60 to 250 meters/min Customer's can choose according his own needs. We can provide a complete production line and can also provide individual parts to complete customer's own line.
Equipments List
Equipments Name
MJT-60-1600
Economical
MJT-80-1600
Standard
MJT-100-1600
High-speed
Mechanical Roll Stand (include the paper roll rail.)
2
2
Hydraulic Roll Stand (include the paper roll rail.)
3
Pre-heater (diameter 400mm)(Up)
1
2
Pre-heater (diameter 600mm)(Ground)
2
Vacuum Single Facer (Roll 280), gimbal drive
1
1
Vacuum Single Facer (Roll 320), gimbal drive
1
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.)
1
1
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.)
1
Double preheater (diameter 400mm)
1
1
Double preheater (diameter 600mm)
1
Double Gluer - A
1
1
Double Gluer - B
1
Double baker (600mm X9heat plates, 4.5meter cooling part.)
1
Double baker (600mm X11heat plates, 5meter cooling part.)
1
Double baker (600mm X14heat plates, 6meter cooling part.)
1
Thin Blade (Simple electrical adjust.)
1
High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.)
1
1
Mechanical Cutter
1
NC Cutter (Servo, straight knife.)
1
1
Conveyor and Stacker
1
Paperboard booking machine
1
Glue system
1
1
1
Steam system (not include the boiler and pipes.)
1
1
1
MJDX-2 Stitcher (Stapler)
Introduction:
MJDX-2 Stitcher (Stapler), the head of the machine is made with electromagnetic clutch and electromagnetic arrester. The machine has advantages as working reaction speed is high, low noise and so on. The carton stapler is the special equipment for nailing the corrugated paper carton and paper box with double-feed device. It can nail double line oblique according to 45degree at the same time and nail the big and middle size paper case continuously or interruptedly.
Sizes available: 600mm, 900mm, 1200mm, 1400mm, 1600mm, 1800mm.
Technological parameters:
Main technological Parameters:
Model
MJDX-2
Speed
400 stitcher/min.
Working thickness
3-ply, 5-ply paperboard
Stitch type
45¡ã double lean-nail
Width of stitch feet
13mm
Size of stitch wire
17#
Operation table height
1.2m
Motor power
0.55KW
Machine Weight
650kg
MJSGL-2 Single Facer Line
(2-layer corrugated paperboard production line)
(2-ply corrugated paperboard line)
Roll Stand Single Facer Paperboard Cutter
Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. This Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Technological Parameter:
Working Width
1400mm
1600mm
1800mm
2000mm
Heating method
Electrical heating/Oil heating / Steam heating
Design speed
40-70m/min
Economical speed
30-60 m/min
Compress-air pressure
0.4-0.9MPa
Flute type
Standard flute
UV Flute
Standard spec.
A,B,C,E,F
MJSD-2 Paperboard Cutter Machine (Light model)
Introduction
MJSD-2 Series Rotary Die-Cutting Machine (Light model) is used for the transverse and vertical cutting of the paperboard as customer¡¯s requirement. The machine use chain model drive, have big turning moment. The machine has reasonable structure, the cutting precision is high and adjust is fast.
The machine is electromagnetism speed adjust, continuous feeding, mechanical control, it can work together with the single facer machine as single facer line for producing the 2-layer corrugated paperboard.
The knives quantity can be required by the customer.
Transversely cut 400-2400mm.
Technological Parameters
Model
MJSD-2-1700
MJSD-2-2000
Max. Cutting width.
1700mm
2000mm
Cutting length
200-2000mm
200-2000mm
Cutting times
20-120times/min
20-120times/min
Cutting thickness
2mm
2mm
Power
3kw
3kw
Working Speed
0-70m/min
0-70m/min
Machine Size
2250*1400*1300mm
2750*1400*1300mm
Weight
About 1500kg
About 1700kg
MJBL-6 Series 3-color big roll Flexo printer
Function and Characteristics
1) The operating panel own double control function from full-face and lateral, special lateral control panel designed personality, it is very convenient and fast.
2) Choose dimensional design, reduce arched cardboard printing error and cardboard shift during the machinery running.
3) Adopt pneumatic locking and motorized detachment.
4) The working method of ink printing plate, pneumatic uplift printing plate, pneumatic uplife ink well, unattached electrical machinery running, cannot stop the ink when stop device, automatic ink equably.
5) Printing plate roller 360 regulation electrical phasing adjustment. (You can also choose CPU digital display phase adjustment function).
6) 45# steel high frequency heat treatment for gear running whole machinery, exact color and last well.
Main Technical parameter
Model number
Roller diameter
Over the
paper width
Area of
valid printing
Electrical
power
MJBL-6-1600
695
1800
2100¡Á1600
5.5
MJBL-6-1600
800
1800
2450¡Á1600
5.5
MJBL-6-1800
800
2000
2450¡Á1800
7.5
MJBL-6-2000
800
2200
2450¡Á2000
7.5
MJBL-6-1800
908
2000
2800¡Á1800
10
MJBL-6-2000
908
2200
2800¡Á2000
10
MJSF-380D Single Facer (Double Flute)
Purpose and Characteristics:
1) Design speed:200m/min
2) Effective width of machine: 1400mm-2500mm
3) Main flute roller diameter¦Õ380mm, pressure roller diameter¦Õ385mm, preheater roller diameter¦Õ400mm.
4) Vacuum suction paper leading features perfect flute formation
5) Dual flute structure, one pair flute rollers unit working and another preheating, achieve flute quickly change. Save working space ( if normal single facer machine need two sets to achieve this function ).
6) PLC control system. Touch screen display all running data, easy for operation.
7) The flute rollers made by special alloy steel with hardness treatment . it' hardness can reach HRC58-60, The surface is well treated by grind and plated chrome, or adopt Tungsten carbide flute rollers are optional.
8) The independent driving box, five driver axis, all gears with hardness treatment, oil spray lubricating by oil pump to reduce noise keep running stable, prolong the use life of gear.
9) Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric . Digital read out for the gap between glue roll and doctor roll. Glue unit can be moved by pneumatic.
10) Flute rollers and pressure roller controlled by hydraulic system, working pressure stable.
11) With water spray device for adjust moisture capacity of flute paper.
12) This dual flute machine suit for single facer paperboard production line ---2 layer (Single facer paperboard ) and corrugated paperboard production line--- 3 & 5 &7 layer. With high market competitive power.
MJZXJ-1 Automatic Folder and Gluer
1. Introduction of the machine:
MJZXJ-1 automatic fold gluer consist of three parts which is feeding paper part, gluing & folding part and counting piling part, with PLC and colorful touch screen to adjust the speed, to adjust the width of carton. with easy-faster-precise-faithful controlling style, automatic feeding paper, automatic gluing and folding, automatic counting, automatic piling and output the carton, average working speed is 150pcs/min,max speed is 220pcs/min.High efficiency, save energy, enviromental is our top pursuit.
1) PLC is Delta brand made in Taiwan.
2) Colorful touch screen is Hitech brand made in Taiwan.
3) All the motor is Taiwan brand.
4) The electric part such like contactor, relay, button, knobs adopt Telemecanique brand.
5) The belt for vacuum and for transmission is Italy brand.
2. Function and characteristics:
1) Automatically finish the top folding and middle folding, meanwhile finish the glue belt stick of the upper and down part, save labor and time.
2) suitable range is wide, can be used in different size of carton, quick and convenient to adjust.
3) The machine work steady and reliable, the pasting quality is firm and high precision.
4) Easy to operate and to maintain
5) Automatic amend the carton right-angle degree.
3.Main technique parameter.
1) Max. corrugate paperboard size:1200¡Á2200mm
2) Min. corrugate paperboard size:260¡Á600mm.
3) Power:8 kw
4.Introduction of each parts
1) Folding part
The first folding line is 180 degree, the third folding line is 135 degree
2) Automatic amending part:
Automatic amending, make the carton with the most exactly form after pasting.
3) Counting and piling part:
The finished product quantity can be counted and with good pilling, can setting the quantity of the out carton, and after pasting, the carton can be come out accord the setting number. The speed can be adjusted, can be controlled separately, the piling speed is 220m/min.
4) Control gauge part:
With PLC and colorful touch screen, and adjust production speed and data-input while the machine is running, many change function of the screen.
Also the carton width adjustment by this PLC and touch screen, input size, automatic adjust.
Carbidopa
White powder.
Flunarizine HCL
White powder.
Ribavirin
White powder.
Zidovudine
White powder.
