Sinometal Carbon is one of the leading manufacturer and exporter of Graphite Electrode in China, located in Shanxi province, with total production of 100,000TPA. We are engaging in producing high quality Graphite electrode from D200mm-D700mm (NP, HP, SHP, UHP) used for global metallurgical industry. After years of experience in research and development, we are equipped ourselves with the advanced production, inspection and test equipments, including calcinations, press, baking, pitch impregnation, graphitization, machining, an advanced and complete production process.
Our graphite electrodes has the following feature:
1. Lower electric resistivity, good electric and heat conductivity;
2. High mechanical strength under high temperature;
3. High resistance to thermal shock and mechanical vibration;
4. Lower ash content;
5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel.
Product Description
"We are engaging in producing high quality Graphite electrode from D200mm-D700mm (NP, HP, SHP, UHP) used for global metallurgical industry. After years of experience in research and development, we are equipped ourselves with the advanced production, inspection and test equipments, including calcinations, press, baking, pitch impregnation, graphitization, machining, an advanced and complete production process.
Product origin :
China
Key Specifications/Special Features :
1. Lower electric resistivity, good electric and heat conductivity;
2. High mechanical strength under high temperature;
3. High resistance to thermal shock and mechanical vibration;
4. Lower ash content;
5. According to the customer's feedback information, our electrodes used in EAF/LF with the pretty lower consumption per ton steel.
Minimum Order Size and Packaigng details :
Packing: Wooden Pallet , Minimum Order Quantity20 feet container
Product Description
Used for the working lining of tundish
Price of product ( USD price or FOB price) :
$1,200
Product origin :
China
Key Specifications/Special Features :
(1)Low-temperature baking: open the air valve and blow it into the mold tire for 5~10min to ensure that the gas concentration in the mold tire is reduced below the explosion limit, and the air valve remains open; open the gas main valve, then open the gas sub-valve one by one and ignite, open Immediately after the valve, the ignition should be started. If there is any abnormality, immediately close the gas main valve and check it, then press the ignition program to ignite; point the burner to adjust the flame to the appropriate size. By adjusting the burner flame, the temperature in the mold cavity is controlled at 200~250 �?�°C, and the baking time is controlled at 50~60min (depending on the baking temperature).
Minimum Order Size and Packaging details :
Packing: exporting standard 1MT Polybag , Minimum Order Quantity20 feet container
