Features:
True Scale 4WD Class 1500 Unlimited Buggy
Full Roll Cage
Front: Independent Front Suspension
Rear Solid Axle (Billet Aluminum CNC)
Rear Trailing Arms (Billet Aluminum CNC)
4 LINK Suspension
All Around CVDs
All metal diff housing and hardened gears
CNC cut metal transmission gears with adjustable slipper clutch
Telescoping universal drive shaft
Hard Anodized 38mm MegaShocks with 8mm shaft
1/4 Scale Servos Included
All Metal Center Transmission with adjustable slipper clutch
All metal gears in the differential housing
Specifications:
Type: CLASS 1500 Buggy 4WD
Scale: 1/5 - 2 Stroke Gas Vehicle
Engine Type: Zenoah 32cc G320RC with stock muffler (ARTR with Engine option)
Servos: 1/4 Scale Servos Included for both ARTRs
Length: 34.8in (884mm)
Width: 22.83in (580mm)
Height: 12.60in (320mm)
Battery Box Dimensions L: 120mm W: 51mm H: 47.5mm
Ground Clearance: 1.97in (50mm) adjustable to 3.98in (100mm)
Wheelbase: 23.94in (608mm)
Weight: 37.8 lbs (17.14 kg) - Without Motor
Main Chassis: 5mm thick 6061 T6 aluminum
Suspension: 2 Front-Wheel Independent with Rear Solid Axle
Drivetrain: 4WD - Front and Rear Differentials with Center Transmission
Tire Type: All Terrain Dominator, heavy threads for long wear. Medium compound
Wheel Size: 7.32x2.91 in (186x74mm)
Gear Ratio: 1:10.079
Servo Specifications:
Kraken Model: TS-555HV (Waterproof)
Operation Voltage: 6V-7.4V
Torque: 555 oz/in @6V, 694 oz/in @7.V using 2S LIPO
Speed: 0.19sec/60 at 6V/0.17/60@ 7.4V
Rated Current: 3500mA @6V/4500mA@7.4V
Continuous Current: 600mA @6V/ 700mA @7.4V
Neutral Point: 1500us
Dimensions: 82x30x56.5mm
Weight: 7oz
Gears Type: Metal
Wiring White: Signal
Wiring Red: 6V-7.4V
Wiring Black: Ground
Connector Type: Futaba or JR
Ingress Protection: IPX7
Enclosure: Aluminum Anodized Case (Waterproof)
Servos Warranty: 1 YR Limited Warranty
**Warning: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300
Needed To Complete:
2.4GHz Radio System
Receiver Battery Pack
Gasoline
2-Stroke Oil
WARNING NOTE: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300
Features:
Factory-assembled RTR large scale gas buggy
Fully functional modular polymer roll cage
Custom, pre-painted polycarbonate body panels
Heavy duty 24mm front hex hubs
Super HD driveshafts
Single piece rear hub
TF-45 2.4GHz FHSS radio system with failsafe
Powerful pull start 26cc 2-stroke engine
4mm Aluminum monocoque chassis
700cc fuel tank for up to 45 minute runs
High flow tuned muffler
Sand rail fitted with off-road tires
TSK-b Class 1 buggy fitted with HB Rodeo SC tires
6V, 3000mAh receiver pack with wall charger
Big bore shocks with 6mm diameter shafts
8000 RPM performance clutch
Full ball bearings
Specifications:
Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)
Includes:
Baja 5B TSK-b Class 1 Buggy w/Kraken RC Sidewinder X5 Conversion
K26 Gasoline Engine
2.4GHz 3-ch Radio
Steering & Throttle Servos
100cc bottle of 2-Stroke Oil
RX Battery
Instruction Manual
Needed To Complete:
Gasoline
Features:
Genuine Zenoah G320 32cc engine
Innovative Bind-N-Driveâ?¢
Spektrum SR6000T telemetry-ready receiver
Improved bar style steering rack with adjustable Ackermann
Improved center differential orientation
Improved drive line angle
Heavy-duty brakes
Innovative clutch mount with gear mesh brace
Tough throttle servo brace
Extra-large 800cc capacity fuel tank
Specifications:
Type: 1/5th Scale 4wd Short Course Truck
Scale: 1/5
Length: 38.0 In (965.2mm)
Width: 20.75 in (527mm)
Height: 12.25 in (311.1 mm)
Ground Clearance: 2.0 in (50.8mm)
Wheelbase: 24.0 in (609.6mm)
Weight: 35.4 lbs (16.06 kg)
Chassis: 5mm Plate, 6061-T6 Aluminum
Suspension: 4-Wheel Independent
Drivetrain: 4WD
Tire Type: Firm, Square Pin
Motor or Engine: 32cc Zenoah G320
Speed Control: SR6000T Telemetry Receiver
Radio: DSMR Compatible (Not Included)
Servos: S900S / S901T
Batteries: 2S Receiver LiPo (Not Included)
Gear Pitch: 1.5 MOD
Wheel Size: 2.8in (71.1mm) wide
Kit/RTR: BND
Shock Type: Oil-Filled, Coil-Over Springs
Body: 4 piece, Polycarbonate, Short Course with Decals
Ball Bearings: Full Rubber Seal Ball Bearings in Car, Metal Shield for Clutch housing
Fuel Tank Capacity: 800cc (27.1 oz)
Includes:
(1) Grey, Orange & White Losi 5IVE-T® 2.0 BND 4WD SCT
(1) Spektrum® SR6000T 6-Channel DSMR Slim Receiver with Telemetry
(1) Zenoahâ?¢ 32cc Gasoline Pull-Start Engine
(1) S900S 1/5 Scale Metal Gear Steering Servo
(1) S901T 1/5 Scale Metal Gear Throttle Servo
(1) Wheel Wrench
(1) Rod End/Shock End tool
(1) Multi Wrench
(1) Spark Plug Wrench
(1) Bind Plug
(1) Exhaust Gasket
2.0mm, 2.5mm, 3.0mm, 4.0mm Allen Wrenches
Product Manual
Needed To Complete:
2S Lipo Receiver Battery and Appropriate Charger
DSMR Compatible Transmitter
87-92 Octane Gasoline
2-Cycle Oil
Ratio Rite Measuring Cup
Features:
Factory-assembled RTR large scale gas buggy
Fully functional modular polymer roll cage
Custom, pre-painted polycarbonate body panels
Heavy duty 24mm front hex hubs
Super HD driveshafts
Single piece rear hub
TF-45 2.4GHz FHSS radio system with failsafe
Powerful pull start 26cc 2-stroke engine
4mm Aluminum monocoque chassis
700cc fuel tank for up to 45 minute runs
High flow tuned muffler
Sand rail fitted with off-road tires
TSK-b Class 1 buggy fitted with HB Rodeo SC tires
6V, 3000mAh receiver pack with wall charger
Big bore shocks with 6mm diameter shafts
8000 RPM performance clutch
Full ball bearings
Specifications:
Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage
Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability
Differential: Metal gear
Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter
Muffler: High-flow tuned
Fuel Tank: 24oz (700cc)
Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe
Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo
Body: Pre-painted custom polycarbonate body panels
Shocks: Big Bore valve variable control with 6mm diameter shafts
Receiver Pack: 6V 3000mAh NiMH
Ball Bearings: Full set
Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount
Tires: HB Rodeo SC
Wheelbase: 22.5" (571mm)
Ground Clearance: 2.4" (61mm)
Includes:
Baja 5B Sidewinder Sand Rail SX5 Buggy w/Kraken RC Sidewinder X5 Conversion
K26 Gasoline Engine
2.4GHz 3-ch Radio
Steering & Throttle Servos
100cc bottle of 2-Stroke Oil
RX Battery
Instruction Manual
Needed To Complete:
Gasoline
Features:
Factory-assembled Ready-To-Run large scale gas-powered muscle car
Fitted with pre-painted officially licensed 1970 Ford Boss Mustang large scale body
Beadlock 8-spoke satin chrome wheels fitted with black heavy duty beadlock rims
Real rubber Tarmac Buster tires with retro styled tread pattern
Latest Heavy-Duty drivetrain option parts installed
2.4GHz FHSS radio system with failsafe
4mm aluminum monocoque chassis with zero kick-up for optimal on-road performance
Powerful 23cc gasoline 2-stroke engine
Torx T27 engine screws
700cc fuel tank provides 45 minutes of driving
High flow muffler
8,000 RPM performance clutch
VVC/HD externally adjustable shock absorbers
Lowered front and rear shock mounts
Lowered front and rear hub carriers
Extra-durable suspension derived from the Baja 5B, 5T and 5SC
Large dense foam bumper mounted to extra-thick bumper mount
Body specific front, rear and side body mounts for enhanced rigidity
Viscous torque differential
Enclosed radio box
External battery charging plug
Durable roll cage protects engine
Gunmetal anodizing for super-cool looks
Complete set of ball bearings
100cc of 2-stroke oil included for treating 1 gallon/5 liters of gasoline/petrol
6V 3000mAh receiver pack and universal, multi-region wall charger included
4 AA batteries for transmitter included
Specifications:
Wheelbase: 570mm [ A ]
Length: 1040mm [ B ]
Height: 280mm [ C ]
Width: 510mm
Weight: 12.6kg (without fuel)
Includes:
(4) AA Batteries for Transmitter
6.0V 3000mAh Receiver Pack
Multi-region receiver pack charger
100cc bottle of 2-stroke oil
Needed to Complete:
1 gallon/5 Liter of Pump Gasoline/Petrol
1 gallon/5 Liter Fuel Can
