Hammer mill crusher Application
Hammer mill crusher is suitable for mid-hard and light erosive Materials, whose pressureresistance strength is no more than 100Mpa and humidity lower than 15%, suchas coal, salt, chalk, gypsum, blocks, lime Stone, etc.
Hammer mill crusher Operating Principle
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw Materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammerto small size. There is a screening plate under the rotor, so that Materials with size smaller than the screen mesh will be screened out and others are left tobe further hammered and ground until reach the st and ard size. The size of the final product can be adjusted by changing the screening plate. The gap between therotors and the screening plate can also be adjusted according to different requirement.
Hammer Mill Design
The major components of hammer mill, shown in the picture, include: - a delivery device is used to introduce the material to be ground into the path of the hammers. A rotor comprised of a series of machined disks mounted on the horizontal shaft performs this task. - free-swinging hammer that is suspended from rods running parallel to the shaft and through the rotor disks. The hammer carries out the function of smashing the ingredients in order to reduce their particle size. - a perforated screen and either gravity- or air-assisted removal of ground product. Acts to screen the particle size of the hammer mill to ensure particles meet a specified maximum mesh size.
Feeder Design
Materials are introduced into the paths of the hammers by a variable speed vein feeder. This type of feeder can have its motor slaved by a programmable controller to the main drive motor of the hammer mill. The operational speed of the feeder is controlled to maintain optimum amperage loading of the main motor.
Screen Design
The amount of open area in hammer mills screen determines the particle size and grinding efficiency. The screen must be designed to maintain its integrity and provide the greatest amount of open area. Screen openings (holes) that are aligned in a 60-degree staggered pattern optimize open area while maintaining screen strength. This method will result in a 40 percent open area using 3.2 mm (1/8 inch) holes aligned on 4.8 mm (3/16 inch) centers.
Read more: evelyn@cncharcoalmachine.com
Hongrun tree branch crusher machine belongs to garden machinery. Hongrun tree branch crusher machine can be used to crush tree branches, leaves, weeds, crop straw, straw and so on. after using tree branch crusher machine, the materials can be directly into pieces on the spot.
The crushed materials can be returning to make fertilizer or can be fed cattle. Compared to burning in situ, Hongrun tree branch crusher machine do not pollute the air, environmental protection.
Hongrun tree branch crusher machine is suitable for yardï¼?orchard, forestï¼? tea garden, nursery, orchard, logging branches and leaves pieces.
Applications:
Briquette Press YE83-250 is applied in steel mills, foundries, recycling plants, ferrous & non ferrous smelting industry to press scrap metal chips (max. length 40mm) into high density briquettes (cylinders). Briquette Press YE83-250 is good for briquetting of cast iron powder, crushed steel turnings, aluminum swarf, copper milling chips, all sorts of metal sawdust, particles, chips & fins, and metal cans shreded to small pieces (smaller than 40mm). Briquette Press YE83-250 is NOT SUITABLE for: wood sawdust, coir fibre, biomass material.
Features:
1. Vertical briquette press, briquette density is high.
2. Robust machine of solid structure, special alloy for press mould liners.
3. Hydraulic oil cooler: standard water cooler (need cooling tower to supply cool water); optional normal air cooler,
or compulsory air cooler (air cooler with compressor).
4. Magnetic return oil filter. NOK (Japan) seals for cylinders.
5. Hydraulic drive, Mitsubishi PLC operation.
6. Feeding conveyor & vibrating motor are optional for charging of material.
YE83-250 Main Parameters:
Main cylinder force: 200 MT
Auxiliary cylinder force: 55 MT
Press mould size: dia110Ã?H300 / dia120Ã?H300 MM
Briquette size: dia110Ã?H(70-100) / dia120Ã?H(70-100) MM
Briquette weight: 3.6-5.2 / 4.1-5.9 kg (cast iron)
Production rate: 1000-1100 kg/hr (cast iron)
Electric motor: 22 kW
Product Show Of Charcoal Powder Crusher Machine�?
Product Introduction:
Hungrun charcoal pulverizer is used crushing charcoal ,who can break charcoal into powder,and then further processing charcoal powder.Crusher is named mill, whose rod bears whole working burthen,so rod depends on successive maintenance for long life length and stably working.
Features of charcoal powder crusher:
1. Simple structure, easy operation, high efficiency.
2. It combines both chipping and crushing in one machine making sawdust in one passage and there is no need to use wood chipper for preprocessing of wood logs.
3. To ensure security, the feed inlet of this crushing equipment adopts self-section design to avoid dangers to users.
Technical Parameters:
Model HR50
Power 11Kw
Capacity 600-800kg/h
Weight 350kg
Dimension 1.6*0.7*1.3m
www.cnhrmachinery.com
description of hay cutter
Hay cutter is used for processing agricultural and animal husbandry feedstuffs such as corn stalks, straw and other agricultural stalks. Agricultural stalks crusher machine is used for farming, animal husbandry, agriculture, biogas and other fields. The processing of straw, pasture and straw is suitable for raising all kinds of livestock.
www.cnhrmachinery.com
The new hay cutter is mainly composed of feeding mechanism, cutting mechanism, feeding mechanism, transmission mechanism, walking mechanism, protective device and rack.
Working Principle of the Wood Crusher:
1�?feeding institutions: mainly by the feeding station, up and down Cao Kun, set blade, set knife bearing seat.
2�?cut off the throwing institutions: mainly by the knife, cutter, locking screws and other components.
3�?transmission: mainly by the V-belt, drive shaft, gear, universal joints and other components.
4�?walking institutions: mainly composed of caster.
5�?protective device: by the protective cover composition.
Coconut Shell Shredder is also called coconut shell shredder, hammer crusher. It is suitable for the crushing of mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc. Shredder machine can be also used for crushing wood branches, chips, rice, straw, wheat straw, corn straw, grass, river reeds, palm husk, soybeans husk, coffee husk, paddy straw, sunflowers stalk, bamboo and other agro-waste etc.
www.cnhrmachinery.com
Our BBQ charcoal briquette machine is the main equipment to make charcoal/coal powder into briquettes with different shapes.The finished productioncan be widely used in many fields,such as BBQ,home,industry.The greatest merit of them is to be easily fired by a lighter or a match within 10 seconds,very convenient,also,the burning time is very long.
Features:
Raw material:coal or charcoal powder are both OK.
Varied shapes of molds:round,square,hexagonal,cylindrical etc.
With our self researched formula,the hollow charcoal rod is smokeless and easy to be ignited.
Technology and innovation are our eternal pursuit.
BBQ charcoal briquette machine is a professional production mechanism of charcoal,also known as charcoal machineï¼?it can processing wood crushing materials into the charcoal rod and ball,tablet.raw material sources rice husk, peanut shell, cotton shell, corn cob, corn stalk, sorghum stalks are used as raw materials to produce charcoal, sawdust, wood shavings, bamboo is the best.
The utility model has the advantages of high density, high calorific value, no smoke, no smell, no pollution, no explosion, and is an internationally recognized green environmental protection products.Hongrun BBQ charcoal briquette machine processed charcoal is hollow, hollow charcoal burning.
Applications: Briquette Press YE83-250 is applied in steel mills, foundries, recycling plants, ferrous & non ferrous smelting industry to press scrap metal chips (max. length 40mm) into high density briquettes (cylinders). Briquette Press YE83-250 is good for briquetting of cast iron powder, crushed steel turnings, aluminum swarf, copper milling chips, all sorts of metal sawdust, particles, chips & fins, and metal cans shreded to small pieces (smaller than 40mm). Briquette Press YE83-250 is NOT SUITABLE for: wood sawdust, coir fibre, biomass material. Features: 1. Vertical briquette press, briquette density is high. 2. Robust machine of solid structure, special alloy for press mould liners. 3. Hydraulic oil cooler: standard water cooler (need cooling tower to supply cool water); optional normal.
Product Show Of Gasifier and Purifier Systemï¼?
What Is this System Used for?
This system inculuds 2 parts, gasifier and purifier.Gasifier can make the powdered biomass material such as sawdust into combusible gases. After being purified by the purifier, the gas can be fired to provide heating soure to charcoal machines such as carbonization furnace and rotary carbonization machine.
The purifier is mainly employed to collect and purify all the smoke emitted during charcoal making. By purification and cooling, the gases are more pure with less harmful smoke to environment. The most important thing is that users can reuse the flammable gas for the heating of dryers, carbonization furnace, etc.
Why Is this System Helpful?
For users, this system is very helpful, especially for large scale charcoal making project. There is no need to burn wood logs to start the furnace in the charcoal making line. So there is no smoke emitted during starting and running the carbonization furnace. During the charcoal making process, all the smoke emission pipes can be connected with this system. The flammable gas after purify, as a heat source, can be used back to the whole charcoal production line. It is energy saving and has no pollution to air. In addition, it can provide a smoke-free operation environment for workers.
Technical Information:
This system can effectively reduce the smoke up to 95% (salinger 1.8/2). Which means the Emissions conform to the China's boiler flue gas emissions targets.
This wet type purifier can make the gas get full contact with liquid. With working principle of inertia collision, interception, diffusion and agglomeration effects for dust removal, it can separate the dust particles from the air, achieve the goal of dust removal. Cooling high temperature gas, it also can absorb the harmful substances in gas and dust removal efficiency is about 95%, and desulfurization efficiency can reach 80%.
Introduction of sawdust extruder Machineï¼?
The charcoal produced by charcoal machine is called extruded charcoal which is made by extruding either raw ground wood or carbonized wood into logs without the use of binder. The heat and pressure in the extruding process hold the charcoal material together. The general charcoal production flow can be Raw Material Crushing--Drying--Shape Forming--Carbonization--Final products. So the charcoal machine shall be crusher-dry-charcoal machine(shapes:logs, rods, briquets, etc.)-carbonization furnace and other auxiliary equipment.
sawdust extruder machineï¼?
the brife introduction of the sawdust extruder machine
The machine is a latest sawdust exturder machine which can compress sawdust, bamboo, wood, shells, straw and other waste biomass materials into rod briquettes. After carbonization, people can get the charcoal sticks to make cooking or boiling,which is more environmentally friendly.
Chicken manure dryer is suitable to be used in large, medium and small-sized chicken house and the areas where the breeding industry is developed.
This kind of rotary dryer is designed for high moisture material, such as more than 65% moisture. The same as Chicken manure, cow manure or pig manure. This dryer is different from other normal dryer, there is a inner mixing shaft to mix plup to better drying. And this type dryer is not very long, it is shorter than normal dryer. This can save your area, and the Drying efficiency is very high. The plup will be in dryer 30-50 mins more or less. You can adjust the speed. As normal, the drying working time is 24hours , our smallest model the output capacity is 0.5 t/h, the largest one is 20 t/h. And the outlet moisture is less than 15%.
The manure dryer include shell, lifting blade, mixing shaft, frequency conversion motor, reducer, gear ring, roller ring and overall support. So it is the whole plant to drying manure. It is suitable for high moisture material.
You can use coal, natural gas, oil, biomass pellet to be fuel for this manure dryer. You should build a burning room to adjust hot air temperature. Normal temperature is 450-550C.
A. Dewaterer. The raw manure moisture is more than 70%, before drying, you need this dewaterer to reduce the water content to be . This can save the fuel consumption, and Improve the efficiency of drying.
B. Transfer system: belt conveyor or screw conveyor. We suggest use screw conveyor for this manure, it can mix manure before feeding.
C. Dust catcher system: As normal you can use cyclone catcher, and we also suggest to use wet-filter to Reduce odor.
D. Burning system,hot air room. The fire can not be in dryer directly, so you should build a hot air room with refractory bricks, then use fan blower to waft hot air to dryer.
Related product:Chicken Manure Dryer
Belt Conveyor Introduction:
Using a metal mesh as a delivery carrier.
Driving methods are: gear motor drive.
Speed control methods are: frequency control, Promise speed.
Frame materials are: stainless steel, carbon steel
Use: for all sectors of the drying, dehumidification, cleaning, quick-frozen and other processes
working principle
Conveyor chain for the sleeve roller chain, continuous bucket structure, for the level of high temperature clinker, climbing.
main feature
â?? transport capacity: the maximum conveying capacity of up to 526m3 / h, the maximum inclination of up to 60 degrees. High temperature, can transport the temperature of less than 600 degrees of material.
â?? Conveyor chain is composed of traction chain, bearing chain and forward lap (or reverse lap) of the hopper, three parts can be free handling.
â?? bearing the wheel with a rolling bearing to roll friction instead of the previous sliding friction, running resistance reduced by 55% -65%, greatly reducing the conveyor power consumption, low energy consumption.
â?? traction chain and load chain separately, so that the structure is simplified, the cost is reduced, easy installation and maintenance.
â?? long life: traction chain using long pitch, sleeve roller chain, chain parts are alloy steel materials; and heat treatment processing, wear. The weight of the conveying part and the material is borne by the load bearing; the chain no longer bear the weight and reduce the wear.
â?? process layout and diverse: horizontal, tilt, but also by the multi-level horizontal, inclined combination of arrangements.
Applicable areas
â?? widely used in cement, paper, sugar, chemical and other industries. The most suitable for the material slurry type, granular and so on.
www.cnhrmachinery.com
