HF vaccum drying chamber for timber
1) PLC automatic control with touch screen interface. Fault self-check system.
2) Machine passed REGULATIONS FOR ELECTROMAGNETIC RADIATION PROTECTION. Safe for operators.
3) Fast drying cycle: High frequency dielectric heating. Drying wood more than ten times faster and more uniformly than traditional kiln.
4) Vacuum minus pressure drying. Much safer for wood. There is no wood crack, color change problems.
5) With hydraulic system and press. During the drying process, hydraulic system will give pressure on wood. After drying, wood will not bend.
6) Integrated design of cooling system. Save floor area and more humanized.
7) Humanized and safe design on tank door and feeding cart. It doesn't need additional rail outside and easy to load wood, open and close tank door.
8) Advanced temperature inspection system. Test the wood temperature correctly and will not disturbed by High frequency.
9) Advanced Wood weight measurement system. It can test the wood weight at any time. Then can show the wood moisture at present.
10) Worm and bacteria killing.
11) Do not need boiler. No pollution.
12) Schneider, Omron, Siemens etc European spare parts: International standard, good quality and easy to replace
Our engineers can provide overseas installtion, training and are available to provide after-sell service and maintenance. We recommend proper training for safe and prolonged use of the machinery.
Product Application
High frequency is also called Radio frequency, it applies heating with high frequency. It can penetrate wood deeply and dry the wood moisture from core to the surface uniformly. It also equips vacuum together. The drying effects is much better. It is suitable for all kinds of wood, especially for large wood beams, hard wood, rare wood as well as veneers drying. HF Vacuum Wood Drying Machine is many times faster than traditional kiln dryers.
Model GGZ-3-DT GGZ-4.5-DT GGT-6-DT GGT-10-DT
Effective Wood Capacity
L*W*H(mm)
Engine 3000*1000*1000 4500*1000*1000 6000*1000*1000 6000*1300*1300
Output Power 30KW 30KW 50KW 80KW
High frequency Wood Board Jointer Press Machine with Belt Conveyor
Product Application
High frequency conveyor belt board jointing machine applied to a variety of specifications of jointing of furniture plate, jointing of integrated plate, wooden door sealing side, jointing of L-type door lines and so on. Use touch screen operation, PLC automatic control simply and easily. Adopting conveyor belt automatic feeding and discharging, It can joint continuously infinite long plate, reduce artificial, save time and effort.
The electrical components of it are imported, the quality is reliable and it is running stable after debugging and strict inspection.
Main Features
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
Safe, no radiation
Model GPB-56-DT-L GPB-80-DT-L
Control Mode PLC touch screen program automatic control
Minimum Gluing Size(mm) 1220*2440 1220*4500
Maximum Gluing Thickness (mm) â?¤80 â?¤80
Total Pressure (Ton) 56 80
HF Output Power (KW) 20 50
Product Application
High frequency board jointing machine is commonly used in the processing equipment of wood industrial raw materials.It joins small timbers gather to a large one.It uses high frequency heating to complete the gluing process. Compared with cold method and other heating methods, it is gradually recognized by the majority of users because it has a faster speed, higher degree of automation, and is adaptable to a wider range and costs less.
It can be used in finger joint laminated board joining,glulam board joining,solid wood joining and L-type door casing joining ,etc.
The electrical components are all imported or domestic top accessories,such as Omron,Siemens,Eaton,etc.All of the hydralic components are Taiwan's original.It adopts PLC and touch screen,simplifying the control process and operation.The program design is diverse and widely used.
Main Features
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
Safe, no radiation
Model GPB-27-DT GPB-36-DT GPB-45-DT GPB-68-DT
Control Mode PLC touch screen program automatic control
Gluing Size(mm) â?¥2440*1220
Gluing Thickness (mm) â?¤40 â?¤60 â?¤80 â?¤150
Total Pressure (Ton) 27 36 45 68
HF Output Power (KW) 15 20 30 50
High Frequency Power Vacuum Wood Dryer Machine
1) PLC automatic control with touch screen interface. Fault self-check system.
2) Machine passed REGULATIONS FOR ELECTROMAGNETIC RADIATION PROTECTION. Safe for operators.
3) Fast drying cycle: High frequency dielectric heating. Drying wood more than ten times faster and more uniformly than traditional kiln.
4) Vacuum minus pressure drying. Much safer for wood. There is no wood crack, color change problems.
5) With hydraulic system and press. During the drying process, hydraulic system will give pressure on wood. After drying, wood will not bend.
6) Integrated design of cooling system. Save floor area and more humanized.
7) Humanized and safe design on tank door and feeding cart. It doesn't need additional rail outside and easy to load wood, open and close tank door.
8) Advanced temperature inspection system. Test the wood temperature correctly and will not disturbed by High frequency.
9) Advanced Wood weight measurement system. It can test the wood weight at any time. Then can show the wood moisture at present.
10) Worm and bacteria killing.
11) Do not need boiler. No pollution.
12) Schneider, Omron, Siemens etc European spare parts: International standard, good quality and easy to replace
Our engineers can provide overseas installtion, training and are available to provide after-sell service and maintenance. We recommend proper training for safe and prolonged use of the machinery.
Product Application
High frequency is also called Radio frequency, it applies heating with high frequency. It can penetrate wood deeply and dry the wood moisture from core to the surface uniformly. It also equips vacuum together. The drying effects is much better. It is suitable for all kinds of wood, especially for large wood beams, hard wood, rare wood as well as veneers drying. HF Vacuum Wood Drying Machine is many times faster than traditional kiln dryers.
HF( RF) Timber Drying Kiln Machine
1) PLC automatic control with touch screen interface. Fault self-check system.
2) Machine passed REGULATIONS FOR ELECTROMAGNETIC RADIATION PROTECTION. Safe for operators.
3) Fast drying cycle: High frequency dielectric heating. Drying wood more than ten times faster and more uniformly than traditional kiln.
4) Vacuum minus pressure drying. Much safer for wood. There is no wood crack, color change problems.
5) With hydraulic system and press. During the drying process, hydraulic system will give pressure on wood. After drying, wood will not bend.
6) Integrated design of cooling system. Save floor area and more humanized.
7) Humanized and safe design on tank door and feeding cart. It doesn't need additional rail outside and easy to load wood, open and close tank door.
8) Advanced temperature inspection system. Test the wood temperature correctly and will not disturbed by High frequency.
9) Advanced Wood weight measurement system. It can test the wood weight at any time. Then can show the wood moisture at present.
10) Worm and bacteria killing.
11) Do not need boiler. No pollution.
12) Schneider, Omron, Siemens etc European spare parts: International standard, good quality and easy to replace
Our engineers can provide overseas installtion, training and are available to provide after-sell service and maintenance. We recommend proper training for safe and prolonged use of the machinery.
Product Application
High frequency is also called Radio frequency, it applies heating with high frequency. It can penetrate wood deeply and dry the wood moisture from core to the surface uniformly. It also equips vacuum together. The drying effects is much better. It is suitable for all kinds of wood, especially for large wood beams, hard wood, rare wood as well as veneers drying. HF Vacuum Wood Drying Machine is many times faster than traditional kiln dryers.
Model GGZ-3-DT GGZ-4.5-DT GGT-6-DT GGT-10-DT
Effective Wood Capacity
L*W*H(mm)
Engine 3000*1000*1000 4500*1000*1000 6000*1000*1000 6000*1300*1300
Output Power 30KW 30KW 50KW 80KW
High Frequency( Radio Frequency) Wood Board Jointing Machine
High frequency board jointing machine is commonly used in the processing equipment of wood industrial raw materials.It joins small timbers gather to a large one.It uses high frequency heating to complete the gluing process. Compared with cold method and other heating methods, it is gradually recognized by the majority of users because it has a faster speed, higher degree of automation, and is adaptable to a wider range and costs less.
It can be used in finger joint laminated board joining,glulam board joining,solid wood joining and L-type door casing joining ,etc.
The electrical components are all imported or domestic top accessories,such as Omron,Siemens,Eaton,etc.All of the hydralic components are Taiwan's original.It adopts PLC and touch screen,simplifying the control process and operation.The program design is diverse and widely used.
Main Features
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
Safe, no radiation
Model GPB-27-DT GPB-36-DT GPB-45-DT GPB-68-DT
Control Mode PLC touch screen program automatic control
Gluing Size(mm) 2440*1220
Gluing Thickness (mm) ,40 ,60 ,80 ,150
Total Pressure (Ton) 27 36 45 68
HF Output Power (KW) 15 20 30 50
HF( RF) Edge Gluer Machine
Product Application
High frequency board jointing machine is commonly used in the processing equipment of wood industrial raw materials.It joins small timbers gather to a large one.It uses high frequency heating to complete the gluing process. Compared with cold method and other heating methods, it is gradually recognized by the majority of users because it has a faster speed, higher degree of automation, and is adaptable to a wider range and costs less.
It can be used in finger joint laminated board joining,glulam board joining,solid wood joining and L-type door casing joining ,etc.
The electrical components are all imported or domestic top accessories,such as Omron,Siemens,Eaton,etc.All of the hydralic components are Taiwan's original.It adopts PLC and touch screen,simplifying the control process and operation.The program design is diverse and widely used.
Main Features
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
Safe, no radiation
Model GPB-27-DT GPB-36-DT GPB-45-DT GPB-68-DT
Control Mode PLC touch screen program automatic control
Gluing Size(mm) â?¥2440*1220
Gluing Thickness (mm) 40 60 80 150
Total Pressure (Ton) 27 36 45 68
HF Output Power (KW) 15 20 30 50
High frequency( Radio frequency) precision frame assembly machine
Character
1, High precision : high precision servo motor (much more precise than normal motor or stepper motor).
2 ,High efficiency: Human interface control panel, PLC control, speed of motor is adjustable, instant size adjusting, high frequency heating, the whole process just needs 10s.
3 ,Convenient: User only need to adjust the curing size on control panel, machine will act automatically.
4 ,Safe: Strict safety protection for human and machine
5. Custom: It can be customized according to your requirement.
Specification
Model GZK-1400-DT GZK-2000-DT GZK-2800-DT
Size (mm) 2800*1150*1620 3560*1150*1620 3820*1150*1620
Weight (Ton) 0.8 1 1.5
Working Size (mm) 1400*700 2000*800 2800*1000
Control Mode PLC, touch screen control
Solidify Time (second) 5-20
Electrical Components Omron, Siemens, Eaton etc.
High frequency( Radio frequency) generator
High frequency generator is the core of the HF Machinery. It is an energy converter which can transform the industrial AC 380V electricity into a high-frequency electric field. It has been widely used in the Multi-layer board and MDF board gluing, Wood board jointing and gluing, Moisture drying, tobacco, grain worm killing, environmental protection and printing, etc.
Working Principle
HF Dielectric Heating
Dielectric is known as insulator, such as timber, plastic, grain, rubber, glass epoxy, glue agent, etc.
HF dielectric heating is to put dielectric in HF electric field, then the intermolecular friction starts to generate heating, finally reach the requirement.
Specification
Model GP-6 (13/27)-DT
Power Supply AC 380V 50Hz,3 phase 4 wire
Frequency(MHZ) 6.78, 13.56, 27.12
Output Power (KW) 2, 5, 8, 15, 20, 30, 50
Output Mode Single, Double, Multi-out
Output Communication Mode Pneumatic, Electromagnetic
Notes As your requirements,we could customize specifications for you
Character
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
safety and health at work, no radiation
Top electrical components, such as Omron, Siemens, Eaton, etc.
High-Frequency Corner Jointing Machine
It is used to picture frames, cabinets, painting frames, mirror frames, doors, especially for assembling the door frame assembly line deduction.
Specification
Model DJ-13-DT
Output Power (KW) 5KW
Curing Time 5-10s
Control System PLC
Character
Used high-frequency heating, it just needs 5-10 seconds to heat the glue cured.
Applied automatic PLC program, various function, easy operation and good application.
Equipped top electrical components,such as Omron,Siemens, Eaton, etc.
Customized suitable machine to reach the clients Requirements
Slope type wooden board joining and frame joining machine clamp carrier
Product Application
High frequency slope board and frame assembly machine apply to wooden board splicing, solid wood door and window and frame assembling, wooden batten edge gluing, L-type lines. It is widely used in the doors, cabinet doors, furniture and other industries.
Main Features
High heating rate and efficiency
Uniform heating
Easy control of heating process
Being heating selective
Biostimulation, sterilization and electrotherapy
Automatic production, low labor
Environmental protection, dust and smog free
Safe, no radiation
Model GXPZ-960-DT GXPZ-1220-DT GXPZ-3000-DT
Control Mode PLC touch screen program automatic control
Max Working Size(mm) 960*2460 1220*2440 1220*3000
Splicing Thickness (mm) 8-100
Upper Pressure (Ton) 6
Back Pressure (Ton) 25 30
Lateral Pressure (Ton) 6
Weight (Ton) 5 5.5 6
HF Power (KW) 20
HF wooden door cabinet frame making machine
Character
1, High precision: high precision servo motor (much more precise than normal motor or stepper motor).
2 ,High efficiency: Human interface control panel, PLC control, speed of motor is adjustable, instant size adjusting, high frequency heating, the whole process just needs 10s.
3 ,Convenient: User only need to adjust the curing size on control panel, machine will act automatically.
4 ,Safe: Strict safety protection for human and machine
5,Custom:It can be customized according to your requirement.
Specification
Model GZK-1400-DT GZK-2000-DT GZK-2800-DT
Size (mm) 2800*1150*1620 3560*1150*1620 3820*1150*1620
Weight (Ton) 0.8 1 1.5
Working Size (mm) 1400*700 2000*800 2800*1000
Control Mode PLC, touch screen control
Solidify Time (second) 5-20
Electrical Components Omron, Siemens, Eaton etc.
High frequency( Radio frequency) curved plylwood hot press machine
Product Application
It also called High frequency press, High frequency hot press, bent wood press, bending wood press, laminated wood High frequency plywood bending machine, High frequency curved plywood press.
It combined the HF heating with the hydraulic press, then bending the material into the required shape.
It is used for Bent plywood chair Bent or arc plywood furniture or bed and Other bent plywood products like cloth hangers, surface of musical instrument, etc.
Main Features
1) Fast and uniformly heating
2) Bending shape is stable, not easy to change de-lamination
3) High frequency power is a selectively heating power, it concentrate only on water or glue, wood not consume HF power, so HF heating is effective and power saving
4) Wooden or MDF mould used, much economic than metal mould if shape is frequently changed.
Model GYJ-80-DT GYJ-90-DT GYJ-160-DT GYJ-180-DT GYJ-200-DT
Type 1 drive 1, 1 drive 2, 1 drive 3, 1 drive 4
Curving Direction Single, triple, multi
HF Output Power 10kw, 20kw, 30kw, 50kw
Total Pressure 80T 90T 160T 180T 200T and over
Hydraulic System Qingtian from Taiwan
Electrical Components Omron, Siemens, Eaton
Application Sofa, dinning table and chair, curving furniture, wooden shoes, curving musical instrument
High Frequency HF Machine for Muscial Instruments
HF machine for the guitar
It combines the high-frequency heating and vacuum..
The electrical components are top accessories, such as the Omron, Siemens, Eaton, etc.
Customization with machines to reach the clients different requirements
Character
Small volume, installed conveniently
Simple system, operated easily
Advanced technology, heated uniformly and bonded quickly
Low consumption, produced economically
HF machine for the piano
Workbench Size 1000*800 1000*300
Splicing Thickness (mm) 10- 50
Upper Pressure 10 6
Back Pressure 20 0.4
Overall Dimension(mm)
L*W*H 4200*1500*2300
Weight (T) 2.5 0.7
Feeding Mode Manual Manual
Notes As your requirements,we could customize specifications for you
HF( RF) bending wood press machine
Product Application
It also called High frequency press, High frequency hot press, bent wood press, bending wood press, laminated wood High frequency plywood bending machine, High frequency curved plywood press.
It combined the HF heating with the hydraulic press, then bending the material into the required shape.
It is used for Bent plywood chair Bent or arc plywood furniture or bed and Other bent plywood products like cloth hangers, surface of musical instrument, etc.
Main Features
1) Fast and uniformly heating
2) Bending shape is stable, not easy to change de-lamination
3) High frequency power is a selectively heating power, it concentrate only on water or glue, wood not consume HF power, so HF heating is effective and power saving
4) Wooden or MDF mould used, much economic than metal mould if shape is frequently changed.
Model GYJ-80-DT GYJ-90-DT GYJ-160-DT GYJ-180-DT GYJ-200-DT
Type 1 drive 1, 1 drive 2, 1 drive 3, 1 drive 4
Curving Direction Single, triple, multi
HF Output Power 10kw, 20kw, 30kw, 50kw
Total Pressure 80T 90T 160T 180T 200T and over
Hydraulic System Qingtian from Taiwan
Electrical Components Omron, Siemens, Eaton
Application Sofa, dinning table and chair, curving furniture, wooden shoes, curving musical instrument
