Salient Features :
Multi Stage Centrifugal Pump With Radial / Mix flow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
It Also Works On Low Voltage
Easy Installation And Easy Servicing
Good Quality Components And Parts Require, less Maintenance
Motor :
Motor Body : Stainless Steel with 1% Nickel
Stamping : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
Thrust Bearing : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
Bush Bearing : GM LTB-4
Rotor Shaft : Stainless Steel 420 H&T
Seal : Nitrile Rubber Oil Seal
Winding Wire : Poly Wrap Double Coated Copper Wire
Pump :
SUCTION / NRV : Graded [G20] Cast Iron
Bowl / Impeller : Noryl-glass Field With Stainless Steel Neckring
Pump Sleeve : Stainless Steel 410 with Hard Chrome
HP : 0.5 HP to 1.5 HP 1Ø
HEAD : 9 Mtrs to 120 Mtrs
CAPACITY : 10 LPM to 95 LPM
VOLTAGE : AC 180 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 25 Nos.
Salient Features
Submerged in water permantatly so no need of separate cabin
Compact design suitable for minimum water level
It also works on low voltage
Noiseless and vibration free operation
Installation without foot valve
Easy installation and servicing
MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
SHAFT : Stainless Steel 420 H&T
TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate
SEAL : Nitrile Rubber Oil Seal
IMPELLER / ROTOR : Dynamically balanced
WINDDING WIRE: Poly wrape Double coated copper wire
Salient Features
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 20.0 HP to 120 HP
THREE PHASE 300- 415V
HEAD 10 Mtrs to 150 Mtrs
CAPACITY 1000 LPM to 4000 LPM
VOLTAGE - AC 300- 415 V, 50 Hz, 2900 RPM
NUMBER OF MODEL More than 800 nos.
Salient Features :
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
Motor Body : Stainless Steel With 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting
HP 2.0 HP to 30 HP
SINGLE PHASE : 180- 240V
THREE PHASE : 300- 415V
HEAD : 4 Mtrs to 465 Mtrs
CAPACITY : 45 LPM to 1200 LPM
VOLTAGE : AC 180- 240 V (Single Phase), 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL : More than 800 nos.
ISI MODEL : More than 300 nos.
Salient Features
Submerge in water permanently, so no need of separate cabin
Priming is not require
It also works on Low Voltage
Noiseless and Vibration free operation
Supplied with foot valve
MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal
BUSH BEARING : GM LTB 4
SEAL : Nitrile Rubber Oil Seal
ROTOR SHAFT : Stainless Steel 420 H&T
IMPELLER : Dynamically balanced
WINDDING WIRE : Poly Wrap Double coated copper wire
HP 0.5 HP to 2.0 HP
HEAD 7.5 Mtrs to 32.5 Mtrs
CAPACITY :40 LPM to 480 LPM
VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 11 Nos.
HP 1.0 HP to 30 HP
HEAD 5 Mtrs to 75 Mtrs
CAPACITY 40 LPM to 5200 LPM
VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 166 Nos.
Salient Features
Squirrel Cage Induction type totally enclosed Motor (TEFC).
Single Phase with running Capacitor
It also works on Low Voltage
Easy installation and easy Servicing
MOTOR BODY : Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt
ROTOR SHAFT : Stainless Steel 420 H&T
IMPELLER : Graded Cast Iron and Dynamically Balanced
BALL BEARING : Reputed Make ZZ Ball Bearing
SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal
WINDING : Super enameled EC Grade Copper Wire
HP 0.5 HP to 2.0 HP
HEAD 6 Mtrs to 28 Mtrs
CAPACITY 25: 550 LPM
VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 24 Nos.
HP 0.5 HP to 25 HP
HEAD 6 Mtrs to 86 Mtrs
CAPACITY 25: 2100 LPM
VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 53 Nos.
Salient Features
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING: G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 10.0 HP to 80 HP
THREE PHASE 300- 415V
HEAD 15 Mtrs to 280 Mtrs
CAPACITY 300 LPM to 2400 LPM
VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL More than 800 nos.
Salient Features :
Multi stage centrifugal pump with Radial & mixflow impeller
It Operate Submerged Beneath The Surface Of Water
Prime mover motors are wet type, water lubricated
Easy installation and easy servicing
It also works on low voltage
Energy efficient design
Good quality components and parts require less maintenance
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
MOTOR BODY : Stainless Steel with 1% Nicke
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hou
THRUST BEARING : Stainless Steel 304 Tilting Pad Segment with Carbon Plat
BUSH BEARING : GM LTB
ROTOR SHAFT : Stainless Steel 420 H&
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wi
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamically balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
HP 2.0 HP to 30 HP
THREE PHASE 300- 415V
HEAD 4 Mtrs to 228 Mtrs
CAPACITY 350 LPM to 2150 LPM
VOLTAGE - AC 300- 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBERS OF MODEL More than 800 Nos.
Multi Stage Centrifugal Pump With Radial & Mixflow Impeller
It Operate Submerged Beneath The Surface Of Water
Prime Mover Motors Are Wet Type, Water Lubricated
Easy installation And Easy Servicing
It Also Works On Low Voltage
Energy efficient design
Good Quality Components And Parts Require, less Maintenance
50 feet head per stage pumps are design for hihg head application
Janta model pump design for 6 motor & 7/8 pump for high discharge application at low cost
MOTOR BODY : Stainless Steel with 1% Nickel
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour
THRUST BEARING Stainless Steel 304 Tilting Pad Segment with Carbon Plate
BUSH BEARING : G.M. LTB 4
ROTOR SHAFT : Stainless Steel 420 H&T
SEAL : Nitrile Rubber Oil Seal
WINDING : Poly Wrape Double Coated Copper Wire
PUMP BOWL : Graded cast Iron
PUMP SHAFT : Stainless Steel 410
IMPELLER : Stainless steel casted dynamicaly balanced
PUMP SLEEVE : Stainless steel with hard chrome plating
50 FEET HEAD PER STAGE PUMP : Pump bowl stainless steel investment casting
SINGLE PHASE : 180- 240V
THREE PHASE : 300- 415V
HEAD 4 Mtrs to 465 Mtrs
CAPACITY : 45 LPM to 1200 LPM
VOLTAGE : AC 180- 240 V (Single Phase), 300 – 415 V (Three Phase), 50 Hz, 2900 RPM
NUMBER OF MODEL : More than 800 nos.
ISI MODEL : More than 300 nos.
