1. Product Overview
It is a folding type high speed gate that is installed at the important entrance, and the lane entrance is also opened and closed within 3 seconds.
Equipped with a safety system that is automatically switched off when in contact with a vehicle or person
is.
2. Specification
- Blocking width: 4 ~ 8m
- Block height: 2.4 ~ 5m
- Open / Close speed: 2 to 4 seconds
Characteristics
As a near-by card reader, it reads the inherent information from an entry card, and sends the data to entry control system.
Function
- ISO 14443A/Mifare type Card is supported.
It functions as a recognition device by connecting to entry control system controller.
Tamper Alarm Function
- Alarm of the detachment and opening of a card reader (Alarm Sound is emitted.)
- It is possible to send alarm data in using RS-485 communication way.
Voice Guidance Service Function (Option)
Specification
- Communication with a Controller
RS-485/Wiegand Output
Metal Cabinet
- Tamper Alarm HOST
RS-485 1PORT, 9600/19200/38400 bps
AUX. : RS-485 1PORT, 9600/19200/38400 bps
Specification
- RFID Spec
· Frequency : 860MHz ~ 960MHz
· RF Output : 100mW
· Read Range : 0 ~ 10cm
· Tag Protocol : EPC Gen2, EPC Gen1, ISO18000-6B
- Wireless Support
· Bluetooth ( Short range ) , ZigBee ( long range )
- PC (usually located on the reception desk of hotel lobby)
- Hotel lock management software+Encoder (How the cards are issued)
- Hotel card lock (Installed on the hotel room door)
- Cards (The keycard to open doors)
- PC (usually located on the reception desk of hotel lobby)
- Hotel lock management software+Encoder (How the cards are issued)
- Hotel card lock (Installed on the hotel room door)
- Cards (The keycard to open doors)
Characteristics
As a near-by card reader, it reads the inherent information from an entry card, and sends the data to entry control system.
Function
- ISO 14443A/Mifare type Card is supported.
It functions as a recognition device by connecting to entry control system controller.
Tamper Alarm Function
- Alarm of the detachment and opening of a card reader (Alarm Sound is emitted.)
- It is possible to send alarm data in using RS-485 communication way.
Voice Guidance Service Function (Option)
Specification
- Communication with a Controller
RS-485/Wiegand Output
Metal Cabinet
- Tamper Alarm HOST
RS-485 1PORT, 9600/19200/38400 bps
AUX. : RS-485 1PORT, 9600/19200/38400 bps
Characteristics
As an input device which reads the encoded data when we hold an ID Card within a distance from the front of a reader, it sends the decoded data to ACU.
Function
- Single unit card reader controller( Stand-alone Type)
- It can be used as a reader by connecting to an entry control system controller.
- With Serial Port(RS485,RS232,IR)
- User Registration: 20,000 persons
- Entry Recording: 100,000 cases
- Compatible with all HID Cards
ã??· - Card Only - PID Only - Card + PID - Card or PID
- Possible to select various operating modes
ã??· - Card Only - - PID Only - Card + PID - Card or PID
Characteristics
- Reader/Writer is strengthened with RF Output design of Turbo Mode function
- Multi Protocol Tag is supplied.
- A low power is consumed with 10mW hyper power-saving design.
- With the technology of preventing cognition collision among readers applied, it is possible to use in the environment where some readers work at the same time.
Quality
It has the performance in proportion to ISO/IEC 18046 and ISO/IEC 18047
Competitiveness
- It supports Multi-Protocol of ISO 18000-6B, U-CODE 1.19, and ISO 18000-6 Type C(EPC Class 1 Gen 2)
- It minimizes the consumed power with a Low Power-consuming technology applied.
- It provides various I/O interface.
- It is a product of Low Cost
Road Blocker
As a barricade blocking the vehicle which enters a building by force, it rises and falls with hydraulic power. It is a cutting edge system of blocking the entry of vehicles, and can normally work after collision with a vehicle.
Characteristics
Roadblock can operate alone, and be used to prevent forcible intrusion at the gateway of vehicles by being installed with other devices, such as gates.
When working, it takes 4secs for a blocking screen to work up to 659mm(Max Height), and having the noticeable paint and warning lights installed, the approaching vehicles can stop in time.
When the blocking screen falls, as its height is the same as the road surface, it doesn't interrupt the flow of traffic. As an option, it is possible to coat the surface of blocking screen with the same materials as the road surface.
1. Product Overview
   A tire killer is a device that destroys the axle of a vehicle that is forcibly entering.
   Normal operation is possible after a vehicle collision.
2. Specification
 - Blocking width: 3.8m
 - Cutting height: 45cm
 - Rise / fall rate: 3 seconds
Road Blocker
As a barricade blocking the vehicle which enters a building by force, it rises and falls withhydraulic power. It is a cutting edge system of blocking the entry of vehicles, and can normally work after collision with a vehicle.
Characteristics
Roadblock can operate alone, and be used to prevent forcible intrusion at the gateway of vehicles by being installed with other devices, such as gates.
When working, it takes 4secs for a blocking screen to work up to 659mm(Max Height), and having the noticeable paint and warning lights installed, the approaching vehicles can stop in time.
When the blocking screen falls, as its height is the same as the road surface, it doesnâ??t interrupt the flow of traffic. As an option, it is possible to coat the surface of blocking screen with the same materials as the road surface.
1. Product Overview
Installed in the sidewalk and in India to prevent vehicles from trespassing, personnel and ceremonies
It is allowed to descend into the basement to enter the system and authorized vehicles.
2. Specification
- Cutting height: 80 ~ 120cm
- Bollard diameter: 25 ~ 35cm
- Rise speed: 5 - 8 seconds
