wireline winch consists ofelectric motora(or S195 diesel egine),clutch,transmission,drum,wirerope and brake etc,which has the advantages of simple structure,convenient and reliable operation,low noise,less mechanical wear,suitable for wide range of using.
W casings are made in DCDMA standards ,the most popular sizesand are AW, BW, NW, NWA, HW, and PW standards applied in geotechnial drilling.
Raw materials:
We choose the best steel tubes in the market to manufacture our rods and pipes. Instant check will be conducted after the raw material is delivered to our plant so that it canmake sure the compositions and specifications meet the inspection form the suppliers.
Heat treatment control:
Heat treatment will greatly make sure the material strength and the thread wear life of the rods and casings. We conduct either tru-wall or both ends heat treatment to the tube body.
Thread opening process:
Precision of threads will impact the use effects and serve time of drill rod and casings.
CNC latches and form cutter are used in thread opening process to minimize error .
Additional thread treatment:
Surface of the threads will be cleaned to remove burr adhered after threads are opened.
At last , the tread surface will be phosphated to improve surface conditions.
Casing and the core tube specification
BW-250 mud pump is a horizontal triplex single-acting piston pump.For this drilling pump.two cylinder diameters and four shifts of speed are available.Triplex mud pump with large cylinder diameter (80mm) is applicable for large-diameter drilling machine, while pump with small cylinder diameter (65mm) is suitable for small-diameter drilling machine.Both of the mud pumps enjoy four shifts of displacement and suite well for different hole depths and diameters.This drilling pump is also perfect for cement mortar grouting with the water cement ratio reaching 1:1.
The drilling fluid used by this reciprocating piston pump shall not contain any chemical impurities that are corrosive to metals and rubber parts. When using mud for flushing, the recommended proportion of water and mud is between 1.03 and 1.12, viscosity of mud between 18 and 25S, silt content lower than 4%, diameter of sand particles not exceed 3mm, and PH value around 7 to 8. No tiny mud balls, weeds, leaves and other impurities are allowed in themud.
With sophisticated structure and new materials in China and abroad, small volume and light weight, easy assembly and disassembly as well as long service life of high wear parts, this mud pump enjoys superior performance.
Basic Info
Model No.: Aq Bq Nq Hq Pq
Machine Tppe:drilling Equipment
Usage: Mineral Exploration Drilling
Certification:iso9001
Trademark: Xizuan
Origin: Jiangyin, Jiangsu, China.
Type: Sintering
Material:tungsten Carbide
Standard:dcdma
Description:
Tsp Diamond Bit Is Short For Thermally Stable Polycrystalline Diamond Cutter Bit. They Are Manufactured In Much The Same Way As Surface Set Diamond Core Bits, But The Natural Diamond Stones Are Replaced By Cube-shaped Thermally Stable Polycrystalline (tsp) Cutters.The Cutters On Tsp Bits Are Less Wear Resisting Than Diamond Bits, But The Heat Resiatance Is Much Better Than Diamond Core Bits.Tsp Diamond Bits Complement With Pdc Diamond Bits.
Size Available:
Q Series:aqï¼?bqï¼?nqï¼?hqï¼?pqï¼?bq3ï¼?nq3/nqtt, Nq2, Hq3/hqtt, Pq3/pqtt
T2 Series: T2 46, T2 56, T2 66, T2 76, T2 86, T2 101
T6 Series: T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, T6s 101
T Series: T36, T46, T56, T66, T76, T86
Z Series: Z46, Z56, Z66, Z76, Z86, Z101, Z116, Z131, Z146
B Series: B36, B46, B56, B66, B76, B86, B101, B116, B131, B146
Wf Series: Hwf, Pwf, Swf, Uwf, Zwf
Wt Series: Rwt, Ewt, Awt, Bwt, Nwt, Hwt
Wm Series: Ewm, Awm, Bwm, Nwm
Wg Series: Ewg, Awg, Bwg, Nwg, Hwg
Others: Nmlc, Hmlc, Ltk48, Ltk60, Bgm, Ngm, Adbg, Tbw, Tnw,
Atw, Btw, Ntw, Nxd3, Ax, Nx, Nxc, Axt, T6h, 4 9/16, Nwd4, 412f, Sk6l146,
Tt46, Tb56, Ts116, Chd10
Description:
1. Our wireline drill rods are of the highest quality ,are manufactured to exacting specifications using advancing maching technoogy.
2. They are manufactured from seamless steel tube by cold drawn.The material is XJY850/30CrMnSiA which meets the global standard.
3. Drill rods are made from quality heat treated materials which ensure superior strength, wear resistance and toughness in the most demanding applications
4. Rods and casing are manufactured under stringent industry standards, and are field tested under a variety of conditions.
5. All rods are designed to be compatible with other rods manufactured to the standard DCDMA
Model BW160 mud pump is a kind of portable mud pump. The pump is a horizontal three cylinder reciprocating single acting piston pump, has four flow and four kinds of pressure, flow and pressure range, the pump has the advantages of small volume, light weight, long service life, simple operation, reliable and flexible, general and standard partsand other characteristics, light and flexible, easy to move. Can be used in railway, within the water, metallurgy, construction, geological industrydeep hole 1000m geological exploration, engineering exploration withpump.
1.Compact structure, light weight, small volume, beautiful appearance, is driven by a hydraulic motor, motor, diesel engine
2.The design on the use of new ideas, new structure, new materials, new technology;
3.Horizontal pump to improve standardization, seriation, generalization,crankshaft, connecting rod body, the cross head, the pump head and some other components related to serialization and the universal, the other components of the reduced species
4.Serve of long life, high reliability
xz114/6yb hydraulic power tong is a type of medium-sized tong,widely applied in making-up and breaking out for well drilling and repairing.
Features:
1.The advenced automatic hydraulic backuo tong controlled by manual valve matches master tong well
,the back tong freely clamps and escapes from the pipe synchronously,enabling a reliable and flexible combined operation.
2.The dies are common for drill pipe of different specification s bu changing various tongs of the master tong and backup tong.
3.Big speed differences between gear shifts provide a high sppeed at the high gear and a big torque at the low gear.
4.The brake and direction control mechanism in the head of the tong is reliable in performance and convenience in assembly,adjustment and repair.
5.The brake and direction control mechnaism in the head of the tong floats under the master tong which is suspending and the backup tong hose is connected to the master tong with joint.The backup can be easily removed from the master tong for convenient handling and move.
6.Torque reader can be chosen to set on the back of the backup tong.
most drilling job during opening hole,it will choose the casing shoe,we provide the most reliable casing shoe makes the hole-opening more smoothly,we offer solid,proven standard casing shoe and heavy casing shoes,you can ensure that users with minimal equipment loss to reach the bedrock
