Product Applications: Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop battery, LED shower head and so on.
The Product Sells Point:
Key Specifications/Special Features:
A: Appearance Dimensions
MF51 enameled wire Epoxy NTC thermistor
Note: 1: Head size: 1.0mm ~ 3.0mm (according to customer requirements)
2: Wire: f0.18MM ~ 0.3MM (according to customer requirements)
3: Cable length: 10MM ~ 400MM (according to customer requirements)
II: Product Features:
1: MF51 series of products for the enameled with epoxy coating type
2: Wide range of resistance: 1KO ~ 200KO
3: Resistance and B value of high accuracy
4: good insulation, high reliability, small time constant
5: small, reflecting the speed
6: is stable for a long time, consistency
7: Operating temperature range: -40 ~ 110 ?
4: Model Description
MF 51 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?51-- epoxy package NTC thermistor temperature sensor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Five: MF51 Series Model Specification
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
Application:Computer microprocessor temperature probe. IC and semiconductor devices overheat protection. Printhead temperature compensation. Player and all kinds of low-power drive circuit protection. Wired communication PBX (2 to 4 per line). DC / AC converter and HIC overheating protection. Various circuits required temperature compensation.
The Product Sells Point:
Key Specifications/Special Features:
Chip Device Overview:
Chip devices belong surface mount device (SMD: Surface Mount Devices) applied to the surface-mount (SMT: Surface Mount Technology) field is a high degree of concentration, an important device low-power circuits. Chip NTC is generally applied to the circuit with adaptive characteristics, temperature compensation and temperature control.
main feature:
End electrode using Ag-Ni-Sn layer structure, with excellent weldability, resistance to soldering;
Single-layer structure technology, distribution capacity is low (less than 3PF), can be used in high-frequency fields;
Surface glass encapsulation technology (10µm), has good mechanical strength and moisture resistance, corrosion resistance.
Products covered:
Dimensions: 0402 (1005), 0603 (1608), 0805 (2012);
R25 range: 1.0 × 102O-6.8 × 105O, the resistance value of the error levels are ± 1%, ± 3%, ± 5%, ± 10%;
B25 / 50 value range: 2500K-5000K, B values of the error levels are ± 1%, ± 2%, ± 3%, ± 5%.
SMD thermistor
NTC chip device main purposes:
Temperature-compensated quartz crystal oscillator (TCXO) mobile communications using the radio frequency circuit, the critical temperature of the monitor, LCD panel.
SMD thermistor
LCD monitors temperature compensation circuit.
Rechargeable batteries and chargers temperature detection. SMD NTC
Computer microprocessor temperature probe.
IC and semiconductor devices overheat protection.
Printhead temperature compensation.
Player and all kinds of low-power drive circuit protection.
Wired communication PBX (2 to 4 per line).
DC / AC converter and HIC overheating protection.
Various circuits required temperature compensation.
Product Applications: Temperature control and temperature detection induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, microwave ovens, electric heaters and other appliances: 1 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection
The Product Sells Point:
Key Specifications/Special Features:
A: Size chart
Single-ended glass encapsulated NTC thermistor
II: Product Features:
1: MF5D radial lead products for single-ended glass encapsulated form
2: good stability, high reliability
3: Wide range of resistance: 1KO ~ 200KO
4 high precision resistance and B values
5: glass packaging, can be used in harsh environments such as high temperature and high humidity
6: Small, rugged, easy to automate installation
7: Operating temperature range -40 ? ~ + 300 ?
8: Rated power: =25mW
9: Heat induction fast, high sensitivity
3: Product Applications:
Temperature control and temperature detection induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, microwave ovens, electric heaters and other appliances: 1
2: Electronic thermometer
3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment
4: hygrometer temperature control and detection
Four: Model Description
MF 5D 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?5D-- single-ended glass encapsulated NTC thermistors.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
Application:Product use: ceramic fuse, products widely used in power supplies, switching power supply, adapter, charger, LED driver power supply, all kinds of household appliances. LED power supply recommended use, mainly for export to the United States, designed for industrial voltage 277V
The Product Sells Point:
Key Specifications/Special Features:
Product Description:
Product Name: High Voltage Fuses
Product Type: 31FB
fusing characteristics: fast-break
Product Package: Epoxy
body size: 4 * 11mm
Operating temperature: -55 ? - + 125 ?
Product Features: 1, small size: the smaller the size of the ease of use of the design and installation;
2, the outer layer of insulation: epoxy resin and other components to prevent short circuit caused by touch;
3, explosion-proof characteristics: high rugged ceramic tubes with epoxy-proof packaging can enhance the safety performance;
Application:Product use: ceramic fuse, products widely used in power supplies, switching power supply, adapter, charger, LED driver power supply, all kinds of household appliances. LED power supply recommended use, mainly for export to the United States, designed for industrial voltage 277V
The Product Sells Point:
Key Specifications/Special Features:
Product Description:
Product Name: High Voltage Fuses
Product Type: 31FB
fusing characteristics: fast-break
Product Package: Epoxy
body size: 4 * 11mm
Operating temperature: -55 ? - + 125 ?
Product Features: 1, small size: the smaller the size of the ease of use of the design and installation;
2, the outer layer of insulation: epoxy resin and other components to prevent short circuit caused by touch;
3, explosion-proof characteristics: high rugged ceramic tubes with epoxy-proof packaging can enhance the safety performance;
Application:Glass fuses, are widely used in power supplies, switching power supply, adapter, charger, LED driver power supply, all kinds of household appliances
The Product Sells Point:
Key Specifications/Special Features:
Functional Characteristics
Testing current
Blow Time
Min
Max
150%
1hour
/
210%
100ms
1800s
275%
50ms
2s
400%
10ms
300ms
1000%
/
20ms
5 * 20 fast Blow glass fuse
Breaking Capacity
35A or 10In whichever is greater
Material
Fuse body –glass tube
End cap--nickel plated brass
Pigtail--tin plated copper on nickel plated brass cap
Application:Household appliances products; such as iron, hair dryer (hairdryer), ovenhair straightener, vacuum cleaners, heaters, fans, juicer, mixer, power, motors, printers, copiers, fax machines, HID ballasts, fluorescent lighting ballasts, transformers, chargers, battery packs, heating appliances, electric heaters, electric cookers, electric thermos, coffee maker, fan, fans, sewing machines, water heaters, power converters, power plugs and sockets, refrigerators, air conditioners, car air conditioners, instruments, equipment, and so do overheat protection.
The Product Sells Point:
Key Specifications/Special Features:
Temperature fuse Brand: TAMURA, AUPO, NEC, Emerson, LEAO, DYE, Panasonic, SWC, JK, RH
Nominal operating temperature
Disconnect the temperature
Keep the temperature
Rated voltage
Features:
1, to prevent overheating, cut off the circuit, disaster prevention, to ensure safety;
2, set temperature, high accuracy, large carriers, with minimal impact current impact;
3, durability and sustainability is good, fast response to the ambient temperature;
4, resistance to vibration, impact resistance, cut off the circuit accurately, not reset;
5, easy to install;
Main purpose:
RY is a thermal fuse when it reaches the set temperature, a one-time change the conductive state (or action). And non-resettable thermal protection components.
Application:Household appliances products; such as iron, hair dryer (hairdryer), ovenhair straightener, vacuum cleaners, heaters, fans, juicer, mixer, power, motors, printers, copiers, fax machines, HID ballasts, fluorescent lighting ballasts, transformers, chargers, battery packs, heating appliances, electric heaters, electric cookers, electric thermos, coffee maker, fan, fans, sewing machines, water heaters, power converters, power plugs and sockets, refrigerators, air conditioners, car air conditioners, instruments, equipment, and so do overheat protection.
The Product Sells Point:
Key Specifications/Special Features:
A, the design and operating principle of thermal fuse
Temperature fuse functional circuits to detect abnormal temperature and cut off. It can detect domestic or industrial heating temperature anomalies and electrical products quickly cu
t off the circuit can be achieved by preventing the effects of fire in unburned.
Temperature fuse wire type with axial and radial lead type two. Use thermal particles (organic matter).
Safety Certification: UL, CSA, VDE, BEBA, PSE, JET, CQC ... certificate, EU ROHS environmental directives
Second, the application: thermal fuse to prevent overheating of the following areas
Product current: 1A ,2A , 3A, 5A, 10A ,15A, 20A
Temperature fuse Brand: TAMURA, AUPO, NEC, Emerson, LEAO, DYE, Panasonic, SWC, JK, RH
Application:Application ? air conditioners, refrigerators, freezers, water heaters, water dispensers, heaters, dishwashers, disinfection cabinet, washing machines, dryers and other appliances on. ? car air conditioners, water temperature sensor, intake air temperature sensor, engine ? Switching power supply, UPS uninterruptible power supply, inverter, electric boilers, etc. ? smart toilet, electric blankets, etc.
The Product Sells Point:
Key Specifications/Special Features:
A: Size chart
MF52 NTC with epoxy to lead
Note: The size and wire color according to customer requirements!
II: Product Features:
1: MF52 series of products for the lead with an epoxy coating type
2: Wide range of resistance: 0.1KO ~ 500KO
3: Resistance and B value of high accuracy
4: moisture proof, good insulation, high reliability, small time constant
5: small, reflecting the speed
6: is stable for a long time, consistency
7: Operating temperature range: -40 ~ 125 ?
3: Product Applications:
Air-conditioning equipment, heating equipment, medical equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, rechargeable battery pack and charger, laptop batteries.
Four: Model Description
MF 52 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?52-- epoxy encapsulated NTC thermistor temperature sensor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Five: MF52 Series Model Specification
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
Product Applications: 1: induction cooker, electric pressure cookers, rice cookers, electric oven, disinfection cabinet, water dispenser, microwave ovens, electric heaters and other appliances temperature control and temperature sensing. 2: Electronic thermometer 3: temperature control and detection of industrial, medical, environmental, weather, food processing equipment 4: hygrometer temperature control and detection 5. Air conditioning equipment, heating equipment, temperature control instrumentation, electronic gifts, electronic hygrometer, car thermometer, electronic calendar, a rechargeable battery pack and charger
The Product Sells Point:
Key Specifications/Special Features:
1: Appearance production requirements:
1: cylindrical shell size: 3 * 8,4 * 20,5 * 25,5 * 30,6 * 30,5 * 80,6 * 100, etc. (can be customized according to customer requirements), the unit: (MM)
2: File Dimensions: can be customized according to customer requirements
3: Cable length: according to customer requirements
4: Wire: PVC and Teflon wire and cable (customized)
5: Wire colors: black, white, red, yellow, green (can be customized according to customer requirements)
6: thermistor parameters: according to customer requirements
7: Housing Material: nickel-plated brass or stainless steel
2: Product Features:
1: MF53 series NTC thermistor for temperature sensor
2: Wide range of resistance: 1KO ~ 500KO
3: Resistance and B value of high accuracy, consistency, and interchangeable
4: good insulation, high reliability, reflecting the fast,
5: with double sealing process, with good sealing and insulation resistance to mechanical impact, anti-bending ability, high reliability
6: Can a long time stability (in the resistance drift rate =1 ‰)
7: The package can be used depending on the installation conditions, user-friendly installation
8: Operating temperature range: -40 ~ 200 ?
3: Model Description:
MF 53 103 F 3950
? ? ? ? ?
?MF ¬-- negative temperature coefficient (NTC) thermistor Code.
?53-- various band shell temperature sensor NTC thermistor.
?103 - thermistor nominal resistance, indicating that the nominal resistance of the resistance: 10 × 103 (O).
Error ?F-- resistance value (accuracy) is: F = ± 1%, G = ± 2%, H = ± 3%, J = ± 5%
?3950-- thermal resistance index (material factor) B is: 395 × 10 (K)
Note: according to customer requirements, provide different resistance, B value precision, customization.
NTC thermistor measurements must note the following:
• can not be measured in the air, the larger the difference in air temperature measurement inaccurate, resulting accuracy deviation.
• After using the high-precision measurements of the bath, measured after NTC into the bath, the bath temperature must be stable before measurement.
• Measure the voltage as low as possible in order to reduce measurement errors due to self-heating NTC.
• High temperature measurement, required temperature bath thermometer correction, check
Application:Widely used in: welding machine, washing machines, air conditioners, refrigerators, furniture, thermostats, electric hot water bottle, electric kettles, electric heaters, electric ovens, water heaters, water dispenser, microwave, sterilizer, electric pressure cookers, rice cookers and other industrial and household appliances temperature control products.
The Product Sells Point:
Key Specifications/Special Features:
The company produces mainly thermostat KSD series of sudden jump bimetallic thermostat,
Especially in high-power thermostat-oriented products, in this regard there is a lot of experience and a strong research and development capabilities of the company's,, stable temperature performance, high precision, carrying current, synchronous product good. Key raw materials from abroad, with the United States Emerson comparable products. Is currently the only one made by the 60A current CE, TUV, UL, CUL and CQC safety certification. The company produces thermostat varieties, the current from 5A-60A, the voltage from 110V-400V. Existing home but also for industrial use.
Technical parameters: AC250V, 400V 15A-60A
Temperature range: -20 ? -180 ?
Reset Type: Manual reset
Safety Certification: TUV CQC UL CUL S ETL
performance and the principle of high current thermostat
KSD30R series thermostat, with the shell closed bimetal contact temperature temperature relay, thermal expansion and contraction principles of sheet metal bent to reach the set temperature, the disconnect can be manually reset after the temperature drops, appliances from the security role.
Large current thermostat product specifications
(1) functions: temperature protection and thermal protection, anti-dry
(2) Electrical Characteristics: AC125V ~ the 250V/15A ~ 30A ~40A ~50A ~60A
? maximum ambient temperature: 180 ° C
(4) Operating temperature range: 0 ° C to 180 ° C (optional). Temperature tolerance: ± 5
? normal insulation resistance:> 100MO
? normal contact resistance: = 100mO
? service life:> 10,000
high current thermostat Note
(1) using the contact temperature installation, the metal cover up snapping charged with the mounting surface of the apparatus.
? installation can not cover up the pressure deformation, so as not to affect performance.
(3) To prevent leakage, the use can not allow the liquid to penetrate inside the thermostat, so as not to affect the electrical reliability.
? this product for bipolar wiring method, when used in accordance with the marker, the correct wiring.
? products should be less than 90% relative humidity, ambient temperature below 40 ?, ventilation, clean, dry, non-corrosive gases warehouse store.
Application:KSD301 series thermostat applications ? sterilizer, ? dishwasher, ? dryer, ? microwave, ? drinking fountains, ? electric kettle, ? office equipment, ? coffee maker, ? sandwich toaster, ? car seat heaters, automobile antifreeze, electric cooker, refrigerator, air conditioner, laminator and other electric appliances.
The Product Sells Point:
Key Specifications/Special Features:
KSD301 series thermostat technical parameters
? electrical parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load)
2) UL AC125V 50Hz 15A (resistive load)
? operating temperature range: 0-300 ? (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ?
? reply and action temperature difference: 8 ~ 100 ? (optional)
? Connection: plug terminals 250 # (bend 0 ~ 90 ° optional); plug terminals 187 # (bend 0 ~ 90 ° optional thickness 0.5,0.8mm optional)
? life: = 100,000 times
? electrical strength: AC 50Hz 1800V lasted 1min, no flicker, no breakdown
? contact resistance: =50mO
? Insulation resistance: =100MO
? Contact form: Normally closed type: temperature rise, contacts open, the temperature drops, contact connected;
Normally open type: temperature rise, contact connected, the temperature drops, the contact is open
? shell protection grade: IP00
Installation: KSD301 Series Installation ordinary activities ring, ring install small round activities, installation of flat panel active ring, ordinary large aluminum cover with mounting holes, with mounting holes lengthened aluminum cover.
KSD301 series thermostat competitive advantage
? stable performance
? high precision
? small size, light weight
? high reliability, long life
? dry worries small radio
? no arc
KSD301 series thermostat Notice
? grounding: The thermostat metal cover metal parts connected to the equipment grounding.
? when using contact temperature installation should be charged with snapping the metal to cover up the installation of surface equipment, to ensure that the temperature effect, should be coated with thermal grease or other properties like heat transfer medium in surface temperature.
? not install when the top cover surface collapsed, loose or deformed, so as not to affect performance.
? not allow liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals.
? product in less than 5A current of the circuit used, should be selected cross-section of 0.5 5-1?2 copper wires; not more than 10A current in the circuit, chose the copper wires cross-section 0.75-1.5?2 .
? product should be less than 90% relative humidity, ambient temperature below 40 ? ventilated, clean, dry, non-corrosive gases stored in the warehouse.
? use can not bend the terminals, otherwise it will affect the reliability of the electrical connections.
Application:Application Field : Be used in Battery packs, Pumps,Cooling fans, Heating appliance, Lighting ballast
The Product Sells Point:
Key Specifications/Special Features:
The Product Sells Point :
Miniature size; Positive make and break with snap -action disc; Suitable for most impregnation processes; Competitive price
Key Specifications/Special Features :
1.Dimension case: with leading wire 60mm normally
Plastic:16x5.2x3mm
2.Rated voltage: AC250V/24V (50/60Hz)
3.Rated current: 6A
4.Rated open temperature range: 40~145?, in steps of 5?
5.Tolerance: (+/-)5?
6.Resetting temperature : lower than rated open temperature 30?(+/-)15?
7.Switching cycles in: 10,000 cycles
8.Contact arrangement:Normally closed&Normally open
9.Standard contact resistance:=50mO
AGENCY FILE NUMBER STANDARD NUMBER APPLICATION
UL E305764 873 Motor protection
VDE 40016121 EN60730-2-2 Motor protection
TUV R50109800 EN60730-2-3 Lighting Protection
TUV R50110965 EN60730-2-9 Thermal cut-out
CB CN5785 IEN60730-2-2 Motor protection
CQC CQC05002013372 GB14536.1 GB14536.3 Motor protection Limit and regulating controls
Application:, Uses: Widely used in electric irons, electric oven, frying pan, warm milk, heat-wave oven, electronic oven, electric pressure cookers, rice cookers, electric heaters, hotplates, ovens and other heating products, thermostat and temperature limiter functions.
The Product Sells Point:
Key Specifications/Special Features:
Technical parameters:
1. Electrical parameters: 16A 250V ~; 16A 125V ~;
2. Operating temperature range: 0 ? ~ 250 ? optional;
3. Electric strength: 2000V ~ 1min no breakdown, reliable product action altogether, do not pull the arc, long life, small radio interference, temperature control accurate;
4. Contact resistance: =50mO;
5. Insulation resistance: =5MO;
6. Leakage current: =0.25mA;
7. Rotate the shaft: torque 1.5N · m above the initial value of the test temperature within ± 1 ?;
7. Life: 100,000 cycles;
8. Thermostat axis rotation angle: 0 ° to 310 ° optional;
9. Terminals: based on actual customer demand and 4.8 * 6.3 * 0.8 0.8 GB terminals such as compliance with the selection.
10. There UL.CUL, VDE, CE, TUV, CEMC, ROHS certification
Description:
1. Disconnect the thermostat and the temperature characteristic curve according to customer test match finished with a temperature dependent;
2. This product is designed with the induced current and temperature control to achieve the purpose of, and can greatly reduce the temperature increase, remote temperature control, thermal compensation;
3. Installation can be designed according to customer requirements;
4. For the convenience of customers to install thermostat, thermostat while also staking a fixed mounting block (piece), but also has the function of heat conduction effect.
Note:
Ceramics, bimetal thermostats, and other physical conditions of external forces should not be kept as 1. install;
2. Storage in strict accordance with the thermostat stacking layers do affect product quality requirements and details such as dust and moisture;
2. If customers need to adjust the temperature setpoint thermostat controller tuning screw screw inside the counterclockwise rotation, temperature setpoint increases, whereas reduced.
