OD: 10 - 325mm
WT: 1.0 - 30mm
Length: up to 12m
Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries.
Process method: Cold drawn, Cold rolling
Finishing: Heat treatment, annealed, acid washing, manual and mechanical
Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max
Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
.15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10
Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163
C Cr Ni Ti Al Fe Al+Ti Grain
0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures.
The alloy is widely used in the heat treating industry.
600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic.
However, when sulfur compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies.
To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use.
A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Titanium sheet and plate are defined with the only difference of sizes. All these products are made from titanium slabs by cold rolling or hot rolling. ASTM B265 is the most common used standard. We can also supply materials as per AMS 4911, ASTM F136 etc. Annealed materials can be furnished as descaled and sandblasted on your request.
We have a rich stock of these products in CP and 6Al4V alloy, and they can be cut to any custom sizes at reasonable charge. Please contact our sales department if you have interest.
Grade
CP Ti
Grade 5 Ti-6Al-4V
Grade 6 Ti-5Al-2.5Sn
Grade 7 Ti-0.2Pb
Grade 9 Ti-3Al-2.5V
Grade 12 Ti-0.3Mo-0.8Ni
Grade 23 Ti-6Al-4V ELI
Standards
ASTM B265, ASME SB265, ASTM F67, ASTM F136, AMS 4911
