Dryer screen dries paper web after passing a press section by adhering the web to a steam heated cylinder.
Material:Â PET, PA, PPS.
Used in the dryer section of paper machine to produce newprint paper, writing paper, carbonless paper, copper print, etc.
Seam type:Â Insert, pin, ping ring, spiral ring join.
Feature:
1. Long service life, wear resistance, the net loss is low.
2. High fatigue resistance, acid, weak alkali resistance.
3. The mesh mark light, forming quality is good.
4. Light weight, easy to transport, set net easy operation.
Huatao supply high quality pressure screen
1. Upflow presssure screen
Application: Used for coarse screening and fine screening of the deinking pulp,waste paper pulp.
2. Outflow presssure screen
Application: Outflow pressure screen used for coarse screening and fine screening of the chemical pulp,waste paper pulp
3. Inflow pressure screen
Application: Used for the screening of low consistency pulp before the paper machine.
1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version.
2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area.
3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth.
4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement.
5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the disc?s instructions.
6, It takes the elastic cylindrical coupling, smooth operation.
7, The disc material is wear-resistant alloy cast iron, all by grinding.
Instruction:
It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption.
Feature
It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
Agitator, also called the pulp mixer, is ideally used in the pulp and paper industry for mixing and agitating pulps. It is suitable for use in a 15-100m³ round or square chest to mix pulp with a consistency of less than 5%.
Main Features:
Materials:All the parts connected with the medium are made of stainless steel.
Blades:The agitator blades can be easily adjusted to meet different needs.
Guide Plate:A strong guide plate protects the shaft and improves mixing efficiency and avoids the entanglement of impurities as well.
Sleeve:Shat protection sleeve prevents shaft from wearing and corrosive.
Drive:Belt transmissions easily and steady and be used tensioner fixed pulleys and easily assemble and disassemble.
Avaliable Seals:The seal casing can be equipped with several eal types to meet the requirements of different applications. Packing can be replaced from the outside without emptying the chest.
Huatao supplying different type Pulper for Paper Plant,such as high consistency pulper,D shape pulper,Drum pulper etc.
This machine can be used to make different kinds of waste paper, recycled paper, virgin pulp, wheat stalk,sugar cane bagasse, catton stalk, wood as as material to make tissue paper, kraft paper, testliner paper, writing paper, printing paper, newsprint paper.
hydrapulper is suitable for the separate of the fibre, purification of the thick liquid material and select thickly pulping equipment, can be continuous or intermittent treat with various with different pulp, semi-chemical pulp, pulp board (meal), goods wasted paper and so on.
HUATAO supplying different type pump for paper plant,welcome to contact us if you are looking more details:
used for deliver ,lifting & pressuringthe pulp material & medium in alkali recovery industrial processes.
Non-clogging centrifugal pump
sizing pump
low pluse pulp pump
Non-clogging pulp pump without leakage
Two-phase flow pulp pump
Felt for the press or dewatering section of a paper machine is formed with an inner woven fabric and with a plurality of longitudinally extending, transversely spaced heavy yarns or strands which are supported on the bottom surface of the fabric by a relatively light cross-machine yarn or binder pick which interconnects the heavy strands with the warp yarns of the fabric
It is a kind of precious material in paper making industry
Can be divided into three types: wet felt, upper felt and dry felt according to the uses
Woven dryer screen made from high grade flat monofilament and round monofilament polyester yarns. Used in the dryer section of paper machine to produce new print paper, writing paper, carbonless paper, copper print
Seam type:Â insert, pin, ping ring, spiral ring join
Features:
1. Long service life, wear resistance, the net loss is low
2. High fatigue resistance, acid, weak alkali resistance
3. Mesh mark light, forming quality is good
4. Lightweight, easy to transport, set net easy operation
1, This machine consisted by the host pulping mechanism , worm wheel feeding mechanism, bearing, coupling and base version.
2, This machine is fixed on the two fixed abrasive discs of mill shell body and stator feed tray and installed on the rotor positioning plate of two rotor abrasive discs to form two grinding area.
3, Pulp passes through by the tube of the grinding shell body and the stator into the heart of the two grinding area, under the action of centrifugal force and slurry pressure through the grinding zone, after grinding zone tooth plate extrusion, complete the beating process, pulp out from mouth.
4, The rotor positioning plate connected to the main shaft with spline floating, as a flexible axial movement.
5, The grinding clearance is adjusted for the manual, through the worm gear transmission inspires wire mother rotates, the stator feed screw driven plate make the corresponding axial movement, makes the grinding area clearance change, grinding clearance and pressure to meet the process requirements, pressure current is the discâ??s instructions.
6, It takes the elastic cylindrical coupling, smooth operation.
7, The disc material is wear-resistant alloy cast iron, all by grinding.
Instruction:
It is main equipment to make coarse and pure pulp. It is used to regrind pulp dross and recycle paper, high efficiency and less eletricity consumption.
Feature
It is suitable for continuous refining chemical,mechanical,and waste paper pulp under the consistency of 3%-5.5%.It is idea pulp beating equipment.
HUATAO supplying different type pump for paper plant,welcome to contact us if you are looking more details:
used for deliver ,lifting & pressuringthe pulp material & medium in alkali recovery industrial processes.
Non-clogging centrifugal pump
sizing pump
low pluse pulp pump
Non-clogging pulp pump without leakage
Two-phase flow pulp pump
Agitator, also called the pulp mixer, is ideally used in the pulp and paper industry for mixing and agitating pulps. It is suitable for use in a 15-100m³ round or square chest to mix pulp with a consistency of less than 5%.
Main Features:
Materials:All the parts connected with the medium are made of stainless steel.
Blades:The agitator blades can be easily adjusted to meet different needs.
Guide Plate:A strong guide plate protects the shaft and improves mixing efficiency and avoids the entanglement of impurities as well.
Sleeve:Shat protection sleeve prevents shaft from wearing and corrosive.
Drive:Belt transmissions easily and steady and be used tensioner fixed pulleys and easily assemble and disassemble.
Avaliable Seals:The seal casing can be equipped with several eal types to meet the requirements of different applications. Packing can be replaced from the outside without emptying the chest.
Huatao supply high quality pressure screen
1. Upflow presssure screen
Application: Used for coarse screening and fine screening of the deinking pulp,waste paper pulp.
2. Outflow presssure screen
Application: Outflow pressure screen used for coarse screening and fine screening of the chemical pulp,waste paper pulp
3. Inflow pressure screen
Application: Used for the screening of low consistency pulp before the paper machine.
In single layer forming fabric, the warp, during weaving, is composed of yarn which is referred to as MD yarn. In order to make endless loops, fabrics are joined by connecting the warp yarn at the end of each fabric. HUATAOÂ uses automated seaming machines for connecting fabrics.
4-shed & 5-shed single layer forming fabric mainly used for producing cultural paper, print paper, tissue paper & toilet paper, packing paper and so on.
8-shed single layer forming fabric is the most wear-resisting one in the single layer screen, which have lone performance life, but mesh print is relatively deep. It is mainly used for copying the papermaking bag, craft paper, cardboard, corrugated paper and so on.
Huatao supplying different type Pulper for Paper Plant,such as high consistency pulper,D shape pulper,Drum pulper etc.
This machine can be used to make different kinds of waste paper, recycled paper, virgin pulp, wheat stalk,sugar cane bagasse, catton stalk, wood as as material to make tissue paper, kraft paper, testliner paper, writing paper, printing paper, newsprint paper.
hydrapulper is suitable for the separate of the fibre, purification of the thick liquid material and select thickly pulping equipment, can be continuous or intermittent treat with various with different pulp, semi-chemical pulp, pulp board (meal), goods wasted paper and so on.
