Hex Screw & Hex Bolt
Material :
Stainless Steel/duplex Steel/ Nickel Alloys
Grade :
A2-50 , A2-70 , A2-80 , A4-50 , A4-70 , A4-80 , 200 Series
Standard :
Metric - Din 933 , Din 931 , Iso 4014 , Iso 4017 , Is 1363 / 4
Inches - Bs 1083 , Ansi B18.2.1
Size In Dia :
Metric - M3 ~ M56
Inches - 3/16" ~ 2"
Size In Length:
Metric - 6 Mm To 500 Mm
Inches - 3/8" To 20"
Manufacturing By:
Cold Forming
Hot Forming
Material :
Stainless Steel / Duplex Steel / Nickel Alloys
Grade :
A2 , A4 , 200 Series
Standard :
Metric - DIN 125 , IS 2016 , DIN 9021 , B18.22.1
Size In Dia :
Metric- 2 MM ~ 100 MM
Manufacturing By :
Cold Forming
Material :
Stainless Steel / Duplex Steel / Nickel Alloys
Grade :
A2-70 , A2-80 , A4-70 , A4-80 , 200 Series
Standard :
Metric - Din 934 , Iso 4032 , Is 1363 , Is 1364
Inches - Bs 1083 , Ansi B18.2.2
Size In Dia:
Metric - M2 ~ M100
Inches - 1/8" ~ 4"
Manufacturing By:
Cold Forming
Hot Forming
Taurus Piping Solutions is a leading manufacturer of branch fitting, buttweld pipe olets, socket weld and threaded pipe olets in all material grades and in compliance with international standard MSS-SP-97. Our production range includes pipe olets such as weldolet, sockolet, threadolet, laterolet, elbolet, nipolets and sweepolets. Weldolet is one of the most commonly used branch connection fitting. It is widely considered a buttweld fitting, as it is welded onto the outlet of the pipe. A welding outlet helps in minimizing the stress concentrations and provides integral reinforcement without the need for reinforcing the weld.
SIZE :
1/8" To 36" (As Per Customer Requirement)
CLASS & SCHEDULE :
In All Class & Schedule
FORM :
Socket-weld & Butt-weld
STANDARD :
ASME 16.11, MSS SP- 83
MATERIAL GRADE :
Carbon Steel Branch Fittings : ASTM A105 & A105N , SA234 WPB, SA234 WPC,SA42 WPL6, SA42 WPL3, WP1. MSS-SP75 WPHY,WPHY 46,WPHY 52,WPHY 56,WPHY 60,WPHY 65, WPHY 70 DIN 1629 St37, RST37.2 St52
Low Temperature Carbon Steel Branch Fittings : A350 LF2/A350 LF3
Copper Alloys Branch Fittings :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Branch Fittings : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Branch Fittings : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Branch Fittings : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Branch Fittings ASTM SA 182 F1/F5/F9/F11/F22/F91:
Lap Joint flanges are used on piping fitted with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap.
DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
SIZE :
½" to 48" (As Per Customer Requirement)
CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc
MATERIAL GRADE:
Carbon Steel Lap Joint Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Lap Joint Flange : A350 LF2/A350 LF3
Copper Alloys Lap Joint Flange :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Lap Joint Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Lap Joint Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Lap Joint Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Lap Joint Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91
ADVANTAGE OF LAP JOINT FLANGES:
Lap Joint flanges have certain special advantages over other flanges. These are as follows:
Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes.
Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges.
In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use.
The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges.
The Lap Joint works as a backing ring on the stub.
The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed.
They allow rotational alignment capability.
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Electro Polish
Test Certificate As Per EN 10204 - 3.1 & 3.2
This is similar to the slip-on Flange in outline, but the bore is threaded, thus enabling assembly without welding. This obviously limits its application to relatively low pressure piping systems. The Flange may be welded around the joint after assembly, but this is not considered a satisfactory method of increasing its use in pressure applications.
DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
SIZE : 1/8" to 48" (As Per Customer Requirement)
CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc
MATERIAL GRADE :
Stainless Steel Screwed Flange : ASTM A 182, A 240?Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex stainless steel Screwed Flange : UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel Screwed Flange : ASTM A 105, ASTM A 181
Alloy Steel Screwed Flange : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys Screwed Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Copper Alloys Screwed Flange :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
This is similar to a slip-on Flange in outline, but the bore is counter- bored to accept the pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The Flange is attached to the pipe by a fillet weld around the hub of the Flange. An optional internal weld may be applied in high stress applications. Its biggest use is in high-pressure systems such as hydraulic and steam lines.
DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
SIZE :
½" to 60" (As Per Customer Requirement)
CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.
MATERIAL GRADE :
Carbon Steel Socketweld Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Socketweld Flange : A350 LF2/A350 LF3
Copper Alloys Socketweld Flange : ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Socketweld Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Socketweld Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Socketweld Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Alloy Steel Socketweld Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Epoxy Coating
Test Certificate As Per EN 10204 - 3.1 & 3.2
This is a Flange without a bore and is used to shut off a piping system or vessel opening. It also permits easy access to vessels or piping systems for inspection purposes.
DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
SIZE : ½" to 60" (As Per Customer Requirement)
CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.
MATERIAL GRADE :
Carbon Steel Blind Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Blind Flange : A350 LF2/A350 LF3
Copper Alloys Blind Flange : ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Blind Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Blind Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Blind Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Blind Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91
This Flange is designed to be joined to a piping system by butt- welding. It is relatively expensive because of its long neck, but is preferred for high stress applications. The neck transmits stresses to the pipe, reducing stress concentrations at the base of the Flange. The gradual transition of thickness from the base to the neck to the wall thickness at the butt weld provides important reinforcement of the Flange. The bore of the Flange matches the bore of the pipe, reducing turbulence and erosion.
DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
SIZE :
½" to 60" (As Per Customer Requirement)
CLASS :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.
MATERIAL GRADE :
Carbon Steel Weldneck Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Weldneck Flange : A350 LF2/A350 LF3
Copper Alloys Weldneck Flange : ASTM / ASME SB 61 / 62 / 151 / 152.
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100,
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Weldneck Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Weldneck Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61.
Stainless Steel Weldneck Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Alloy Steel Weldneck Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
The Flange is slipped over the pipe or tube and welded (usually both inside and outside) to provide strength and to prevent leaks. These flanges are at the low cost end of the scale, and do not require high accuracy when cutting the pipe or tube to length. They can sometimes have a boss or hub, and can be made with a bore to suit pipe or tube.
Dimension Specifications : As Per The International Standard Astm, Asme, Api, Aisi, Bs, Ansi, Din, Jis, Mssp, Nace
Size :
½" to 60" (As Per Customer Requirement)
Class :
150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc.
Material Grade :
Carbon Steel Slipon Flange : ASTM A105, ASTM A 694 F42
Low Temperature Carbon Steel Slipon Flange : A350 LF2/A350 LF3
Copper Alloys Slipon Flange :
ASTM / ASME SB 61 / 62 / 151 / 152.
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100,C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Slipon Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Slipon Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61.
Stainless Steel Slipon Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Alloy Steel Slipon Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91
Value Added Services :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
SIZE :
½" to 4" (As Per Customer Requirement)
CLASS :
2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS
STANDARD :
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
MATERIAL GRADE :
Carbon Steel Forged Cap : ASTM A105 & A105N
Low Temperature Carbon Steel Forged Cap : A350 LF2/A350 LF3
Copper Alloys Forged Cap :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Cap :
Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Cap : ASTM A 182 UNS F44, F45, F51, F53, F55, F60 F61
Stainless Steel Forged Cap :
ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Cap : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
SIZE :
½" to 4" (As Per Customer Requirement)
CLASS :
2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS
FORM :
Equal , Reducing & Screwed
STANDARD :
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
MATERIAL GRADE :
Carbon Steel Forged Coupling : ASTM A105 & A105N
Low Temperature Carbon Steel Forged Coupling : A350 LF2/A350 LF3
Copper Alloys Forged Coupling :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Coupling :
Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Coupling : ASTM A 182 UNS F44, F45, F51, F53, F55, F60,F61
Stainless Steel Forged Coupling : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Coupling : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
SIZE :
½" to 4" (As Per Customer Requirement)
CLASS:
2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS
FORM :
Equal , Reducing & Screwed Elbow
STANDARD :
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
MATERIAL GRADE :
Carbon Steel Forged Elbow : ASTM A105 & A105N
Low Temperature Carbon Steel Forged Elbow : A350 LF2/A350 LF3
Copper Alloys Forged Elbow :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Elbow : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Elbow : ASTM A 182 UNS F44, F45, F51, F53, F55, F60,F61
Stainless Steel Forged Elbow : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Elbow : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES:
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
SIZE :
1/8" to 4" (As Per Customer Requirement)
DIMENSION STANDARD :
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE:
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS
TYPE :
Seamless
FORM :Pipe Nipple, Hex Nipple, Swage Nipple, Barrel Nipple
MATERIAL GRADE :
Carbon Steel Buttweld Nipple: ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Stainless Steel Buttweld Nipple: ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Alloy Steel Buttweld Nipple: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Buttweld Nipple: ASTM A 815 UNS NO S 31803, S 32205
Low Temperature Carbon Steel Buttweld Nipple: ASTM A420 WPL3 / A420WPL6
Nickel Alloys Buttweld Nipple:
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201)
UNS 4400 (MONEL 400)
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)
SIZE :
½" to 30" (As Per Customer Requirement)
DIMENSION STANDARD :
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE :
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS
TYPE :
End Cap
MATERIAL GRADE :
Carbon Steel Buttweld Cap : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Stainless Steel Buttweld Cap : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Alloy Steel Buttweld Cap : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Buttweld Cap : ASTM A 815 UNS NO S 31803, S 32205
Low Temperature Carbon Steel Buttweld Cap : ASTM A420 WPL3 / A420WPL6
Nickel Alloys Buttweld Cap :
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201)
UNS 4400 (MONEL 400)
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)
SIZE :
1/8" to 48" (As Per Customer Requirement)
DIMENSION STANDARD :
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE :
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS
TYPE :
Seamless / ERW / Welded
FORM :
Eccentric Reducer, Concentric Reduce
MATERIAL GRADE :
Carbon Steel Buttweld Reducer : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Stainless Steel Buttweld Reducer : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Alloy Steel Buttweld Reducer : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Buttweld Reducer : ASTM A 815 UNS NO S 31803, S 32205
Low Temperature Carbon Steel Buttweld Reducer : ASTM A420 WPL3 / A420WPL6
Nickel Alloys Buttweld Reducer :
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201)
UNS 4400 (MONEL 400)
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)
SIZE :
½" to 48" (As Per Customer Requirement)
DIMENSION STANDARD :
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE :
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS
TYPE :
Seamless / ERW / Welded
FORM :
45 Deg Elbow, 90 Deg Elbow, 180 Deg Elbow, Short Radius, Long Radius, Any required deg
MATERIAL GRADE :
Carbon Steel Buttweld Elbow : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Stainless Steel Buttweld Elbow : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Alloy Steel Buttweld Elbow: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Buttweld Elbow: ASTM A 815 UNS NO S 31803, S 32205
Low Temperature Carbon Steel Buttweld Elbow : ASTM A420 WPL3 / A420WPL6
Nickel Alloys Buttweld Elbow :
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201)
UNS 4400 (MONEL 400)
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)
SIZE :
½" to 48" (As Per Customer Requirement)
DIMENSION STANDARD:
ANSI B 16.9 ,B 16.25 , B 16.28,MSS SP-43,SP-48,SP59
SCHEDULE:
SCH 10, SCH 40, STD, SCH30, SCH80, SCH XS, SCH 80, SCH 60, SCH120, SCH140, SCH160, XXS
TYPE :
Seamless / ERW / Welded
FORM :
Equal Tee, Reducing Tee, and Barred Tee, Lateral Tee
MATERIAL GRADE : Carbon Steel Buttweld Tee : ASTM A 234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Stainless Steel Buttweld Tee : ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Alloy Steel Buttweld Tee : ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Duplex Steel Buttweld Tee : ASTM A 815 UNS NO S 31803, S 32205
Low Temperature Carbon Steel Buttweld Tee : ASTM A420 WPL3 / A420WPL6
Nickel Alloys Buttweld Tee :
Standard ASTM / ASME SB 336
UNS 10276 (Hastelloy C 276)
UNS 2200 (NICKEL 200)
UNS 2201 (NICKEL 201
UNS 4400 (MONEL 400
UNS 8020 (ALLOY 20)
UNS 8825 Inconel (825)
UNS 6600 (Inconel 600)
UNS 6601 (Inconel 601)
UNS 6625 (Inconel 625)
Bushings are the equipment's, which are generally used for the purpose of providing resistance towards high vibration and also to provide a desirable support to the machinery units. These forged bushings have been designed and constructed at very reliable and trusted companies using top grade raw materials which we are importing and then effectively exporting and supplying them to our clients in several regions of the country and abroad. These forged bushings are one of the most highly selling products of our company, which we are offering at very convenient range of prices for our clients.
FEATURES :
Easily affordable
Superb material quality
Highly tough and tensile
Excellent finishing
Long lasting and efficient
SIZE :
½" to 4" (As Per Customer Requirement)
STANDARD :
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
MATERIAL GRADE :
Carbon Steel Forged Bush : ASTM A105 & A105N
Low Temperature Carbon Steel Forged Bush : A350 LF2/A350 LF3
Copper Alloys Forged Bush :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Bush : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Bush : ASTM A 182 UNS F44, F45, F51, F53, F55, F60,F61
Stainless Steel Forged Bush : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Bush : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
Along with several other supreme quality industrial installations and fitting equipment's, we are also offering our clients one of the finest quality forged plugs. These forged plugs are used in the industrial and mechanical purposes for providing a high durability and tensile strength to the machineries. These forged plugs are excellently designed and constructed using top grade raw materials, which are very much strong and tensile. Our clients can obtain these forged plugs at our company at very economical range of prices.
FEATURES : Excellent finishing
Superb material quality
Easy installation
Corrosion resistant
Sturdy and tensile
MATERIAL GRADE :
Carbon Steel Forged Plug : ASTM A105 & A105N
Low Temperature Carbon Steel Forged Plug : A350 LF2/A350 LF3
Copper Alloys Forged Plug :
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Plug : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Plug : ASTM A 182 UNS F44, F45, F51, F53, F55, F60,F61
Stainless Steel Forged Plug : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Plug : ASTM SA 182 F1/F5/F9/F11/F22/F91
SIZE:
½" to 4" (As Per Customer Requirement)
CLASS :
2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS
FORM :
Equal, Reducing & Screwed Tee
STANDARD:
ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
MATERIAL GRADE:
Carbon Steel Forged Tee: ASTM A105 & A105N
Low Temperature Carbon Steel Forged Tee: A350 LF2/A350 LF3
Copper Alloys Forged Tee:
ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Tee : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Forged Tee : ASTM A 182 UNS F44, F45, F51, F53, F55, F60,F61
Stainless Steel Forged Tee : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Tee : ASTM SA 182 F1/F5/F9/F11/F22/F91
VALUE ADDED SERVICES :
Hot Dip Galvanizing
Test Certificate As Per EN 10204 - 3.1 & 3.2
Ring-Joint gaskets are manufactured in accordance with API -6A, API-17D and ASME B16.20 standards, approved by American Petroleum Institute to PSL 4 Standard, the highest quality rating-We ensure faster delivery with better inventory of regular RTJ's and urgent requirement of non standard or exotic material also can be addressed in the shortest time as we make the gasket from the very base material, all under one roof. Our complete in-house casting and machining facilities enables us to make our own raw ring castings, ensuring fast turnaround and complete commitment to quality at every stage of manufacture.
Our RTJ's can be traced back to the scrap material used and can be ratified to NACE specifications on request. The performance of the gasket is based on the geometrical accuracy, surface finish of the sealing area and the hardness of the gasket material. The softer the gasket than the flange the better will be the sealing. This concept has been well ingrained in the process to make gaskets of hardness as low as 110 BHN in SS316. We make sure that the hardness of the gaskets are 10% below the upper limit specified by API standards. Soft Iron and Low carbon steel are given protective electroplated zinc coating of 10-12 micron thickness. RTJ gaskets material with recommended Max Hardness and identification as specified by API and 16.2 ASME standards are listed along with non standard material, any custom required material also can be taken up to demand.
We have in store for our clients a sturdy range of stainless steel Grade 321 Pipes, Stainless steel Grade 316L pipes, Stainless steel grade 904L Pipes, that are capacitated to withstand temperature variations and thus are used in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers and similar applications.
Size :
½" to 24" in Seamless & upto 60" in Welded. (As Per Customer Requirement)
Schedule :
Sch 5s To Sch 160
Stainless Steel Grade :
ASTM / ASME SA 312 GR. TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 317, 317L, 321, 321H, 347, 347H, 904L.
ASTM / ASME SA 358 CL 1 & CL 3 GR. 304, 304L, 304H, 309, 310S, 316, 316H, 321, 347.
DUPLEX STEEL GRADE :
ASTM / ASME SA 790 UNS NO S 31803, S 32205
Specifications : ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790.
Our clients can avail from us a comprehensive range of Forged Rings in any Grade, which is offered in different sizes and shapes. The range meets various industry uses and is customized in accordance with the specifications detailed by our esteemed clients. We procure these products only from the trustworthy vendors, who utilize high-grade raw material and sophisticated techniques to manufacture this range.
DIMENSION SPECIFICATIONS AS PER THE CLIENT REQUIREMENT
SALIENT FEATURES OF FORGED RINGS :
Strength
Durability
Reliability
Corrosion resistance Close tolerances
We provide high quality Forged rings of any sizes for Heavy industrial machinery as per the design specifications of our customers
SIZE :
3MM to 3000MM
FORM :
Forged & Seamless Rings
MATERIAL GRADE :
Carbon Steel Forged Rings : ASTM A105 & A 105N, ASTM A 694 F42
Low Temperature Carbon Steel Forged Rings : A350 LF2/A350 LF3
Copper Alloys Forged Ring : ASTM / ASME SB 61 / 62 / 151 / 152
C 70600 (CU -NI- 90/10)
C 71500 (CU -NI- 70/30)
UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100
C 10200, C 10300, C 10800, C 12000, C 12200
Nickel Alloys Forged Rings : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276
Duplex Flange Forged Rings : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61
Stainless Steel Forged Rings : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L
Alloy Steel Forged Rings : ASTM SA 182 F1/F5/F9/F11/F22/F91
