Compatible model:EOS 5D Mark II/5D Mark III/EOS 7D/EOS 60D
Product Description: Use High-end Class A Batteries. The advantages include fully charged, longer life, 100% built-in perfect compatible chip. Though use it under high frequency, it can still have the best internal consistency, to ensure the highest efficiency and stability of the batteries.
Product Functions:
1.Digital Super-core Technique. Adequate Battery Energy. Allowing you to hoot more and longer recording time;
2.No Memory Effect. Support fast charging, re-use and long life;
3.Use the safety valve technique of well-known factory. >72-hour aging test to ensure that each battery is reliable and safer.;
4.With the combination of PC bulletproof plastic shell material and precision ultrasonic welding technology, it is anti-aging, anti-seismic, can avoid damage, more durable and easy-to-use.
Use Tips:
1.Make sure it is run out of power before using the new battery. Then continuous charge for more than 10 hours immediately (do not care about the ¡¡ãbattery is fully charged¡¡À is displayed after charging for 1-2 hours). Try to use the battery until it is fully run out, then you can start the next charging. After several times, battery will be activated to the best condition. The said limitation will not be occurred for future use. Nevertheless, it is advisable to charge for 2-4 hours each time for the battery to be fully charged.
2.Please use the original or special charge for the charging. If you use the universal charger and lead to the battery is not usable for its performance was dropped, warranty will not be provided.
3.To avoid battery collision or short circuit, please keep the battery clean, dry and do not place it under high temperature.
4.Do not keep the battery when it is fully run out or charged. It is best to keep when it has about 40% electricity and recharge once for every six months.
Specifications:
Durable
Safe, Reliable, Stable, Fully charged up to 500-800 times or above.
Multiple Protection Excellent design makes the product not only has the overcharge, discharge, multiple protection, over-current and short-circuit, but also has to balance internally for the charge and discharge of the batteries at the same time.
Warranty Use new A-grade world top SANYO power batteries, safe, reliable and stable.
Quality Test
Standard modern assembly line, before the products are delivered, they have to pass the charging, discharging and aging tests and guarantee 100% quality test
Detailed Parameters
Item No.BatteryDimensions Battery VoltageBattery Capacity
LP-E6
SANYO
56.7mm*38.3mm*20.9mm7.4V1620mAh
1*6
Product function
1. Pawn for canon is a wireless flashgun remote control for canon camera.
2. Pawn for canon is multi-function wireless shutter remote control, and flash trigger function.
3. Fsk modulation used to improve the reliability and stability of the product, use the free worldwide 2.4ghz frequency.
4. Available to shoot with single, bulb, continuous, delay mode.
5. With function, which can wake up the flash under sleep mode; guarantee to shoot each picture.
6. Changeable connecting cable for difference camera model.
7. With saving power function, the transmitter is only use 3ma under working status. Receiver is only use 2ma under working status. Battery working hour is up to 400hrs when using 2pcs of aaa alkaline battery. More than 10x compare with the similar product.
8. Low-voltage design, and available to use rechargeable battery.
9. Multi-power design, which can be use this via power socket.
10. Shutter speed up to 1/320s. (depend the camera model, some camera are only support 1/250s or lower)
Product specification
Applicable to:Canon
Type:Fsk 2.4ghz wireless system
Operation range:100m
Channel:16
Transmit power:-1db
Sensitivity:-97db
Cable length:1.2m (coiled style)
Transmitter stand-by time:25000 hours (cr-2 lithium-ion battery)
Receiver stand-by time:
400 hours (2pcs aaa alkaline battery)
Transmitter measurement (l x w x h) :66 x 37.5 x 28.5 mm
Receiver measurement (l x w x h) :80 x 37.5 x 30 mm
Included items
Transmitter:1set
Receiver :1set
Aaa battery :2pcs
Cr-2032 battery :
1pc
Shutter cable :
1pc
Flash cable :1pc
Manual :1pc
No.Barcode ModelCarton sizePacking qty
1489 51523 02296Pawn for canon52cm*22cm*49.5cm 1*4*12pcs
2489 51523 02333Pawn for canon rx
Connecting plug for camera mode:
N3 n3+ e3
1*48
Product Function.
1. Pawn For Nikon is a wireless flashgun remote control is for Nikon Camera.
2. Pawn For Nikon is multi-function wireless shutter remote control, and flash trigger function.
3. FSK modulation used to improve the reliability and stability of the product, use the free worldwide 2.4GHz frequency.
4. Available to shoot with single, Bulb, continuous, delay mode.
5. With function, which can wake up the flash under sleep mode; guarantee to shoot each picture.
6. Changeable connecting cable for difference camera model.
7. With saving power function, the transmitter is only use 3mA under working status. Receiver is only use 2mA under working status. Battery working hour is up to 400hrs when using 2pcs of AAA alkaline battery. More than 10X compare with the similar product.
8. Low-voltage design, and available to use rechargeable battery.
9. Multi-power design, which can be use this via power socket.
10. Shutter speed up to 1/320S. (Depend the camera model, some camera are only support 1/250S or lower)
Product Specification
Applicable To: Nikon
Type:FSK 2.4GHz Wireless System
Operation Range:100M
Channel:16
Transmit Power:-1dB
Sensitivity:-97dB
Cable length:1.2M (Coiled style)
Transmitter Stand-by Time:25000 hours (CR-2 lithium-ion battery)
Receiver Stand-by Time:
400 Hours (2pcs AAA alkaline battery)
Transmitter Measurement (L X W X H) :66 X 37.5 X 28.5 MM
Receiver Measurement (L X W X H) :80 X 37.5 X 30 MM
Included Items
Transmitter:1set
Receiver :1set
AAA Battery :2pcs
CR-2032 Battery :
1pc
Shutter cable :
1pc
Flash cable :1pc
Manual :1pc
No.Barcode ModelCarton sizePacking QTY
1
489 51523 02210
Pawn For Nikon52cm*22cm*49.5cm1*4*12PCS
2
489 51523 02272
Pawn For Nikon RX
Connecting plug for camera mode:
DC0 DC1 DC2
1*48
