2.8mm
Strip size: 0.3514
Strip material: flux cored wire special steel strip
If the flux material is for hard facing use, the formula is mainly composed by the metal powder, the specific gravity of the metal powder is heavier, it can gain higher filling rate.
Filling rate: 35-45%
Production speed: 65m/min
According to the final product technical requirement, Can be configured by our 8 station active forming machine, 6-head drawing machine to be the host unit of complete sets of equipment.
Wooden cases.
9-head wire drawing machine (XZ-YL-9/400)
Main technical parameter
Machine composition:
1.XZ-FX-800 Pay-off rack (mechanical part)
2.XZ-YL-9/400 straight wire drawing machine (mechanical part)
3.XG800 bobbin coiling machine (mechanical part)
Main technical parameter"
1. Wire material: Flux core wire
1. Diameter of inlet wire: 2.05mm-2.8mm
2.Finished wire spec. 1.2mm-1.6mm
3.Max inlet wire intensity: 700Mpa
4.Max. diameter of inlet wire: 2.8mm
5.Min. diameter of outgoing wire: 1.2mm
6.Max drawing speed: 13m/s
7. Water consumption and pressure: 3mP3P/h Water pressure 0.3Mpa
8. Air consumption and pressure: 0.6mP3P/h Air pressure 0.4Mpa
9.Motor:
a. Host machine: 15kwAC variable frequency motor
b. Wire receiver: 15kwAC variable frequency motor
Noisy of single unit: 81db.
Wooden cases.
1. Maximum width of slitting strip: 250mm
2.Maximum thickness of slitting strip:1mm
3.Maximum speed of slitting:
4.V max=40m/min
5.Width of slitting 8-16mm
6.Total power:13.2KW.
Wooden cases.
Main technical parameter:
Max. volume 1000L
Automatic feeding system
Power:10kw
Stainless steel barrel
Max mixing amount: 300kg.
Wooden cases.
Machine parameter:
Rate power 36.67KW
Rated heating power :Cleaning is 12KW, heating is 12KW, hot airing is 12KW, and ultrasonic is 0.67KW.
Adjustable heating temperature.
Wooden cases.
