Supplier : Dished-ends (single piece/petals), diameter up to 5.4 mtr. In single piece, up to any diameter in petals, thickness up to 140 mm in single piece, up to 160 mm thickness in petals, cones, spheres, tank bottoms, flat ends, boiler ends, boiler quality plates, sa 516 gr. 70 n, sa 516 gr. 60 n, is 2002, fabrication jobs, tanks, pressure vessels, boilers, boiler drums
Services : Engaged in designing, manufacturing, supplying and installing equipments like dished-ends, tank bottoms, flat ends, boiler ends & cones
Verification Status
Contact Details:
Kh. No. 40/21, 39/25, Hanuman Lane
Near Rani Khera Rly. X-Ing, Mundka
Nangloi
New Delhi
110041
Delhi
India
Fuel /medical /food ethanol /alcohol process machine,ethanol/alcohol production line/process plant ,ethanol /alcohol equipment ,ethanol/alcohol distillation machine ,ethanol /alcohol turnkey project
1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production plant.
You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol).
DDGS; Distillers Dried Grains with Solubles.
We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements.
We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable price
Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment
Distillation columns
Sugar Fuel /medical /food ethanol /alcohol process machine,ethanol/alcohol production line/process line ,ethanol /alcohol equipment machinery,ethanol/alcohol distillation machine ,ethanol /alcohol turnkey project
1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production line.
You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol).
DDGS; Distillers Dried Grains with Solubles.
We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements.
We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable price
Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment
Distillation columns.
95%96%Ethanol/Alcohol Production Line
Fuel /medical /food ethanol /alcohol process machine,ethanol/alcohol production line/process line ,ethanol /alcohol equipment ,ethanol/alcohol distillation machine ,ethanol /alcohol turnkey project
1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production line.
You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol).
DDGS; Distillers Dried Grains with Solubles.
We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements.
We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable price
Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment
Distillation columns
Ethanol/Alcohol process machine ethanol/alcohol process line /production line ,turkey project for ethanol/alcohol production line ,ethanol /alcohol equipment,ethanol /alcohol distillation machine ,dehydration ethanol/alcohol process machine .
1. It is a turn key whole set equipment, simple equipment, less worker, less area, less cost.
2. Can produce 1000L-1000000L 96%-99.9% alcohol(ethanol) per day.
3. Can use Corn, wheat, cassava, molasses, rice, potato, date, beetroot, sugar cane ect which contains starch or sugar material.
4. We can do the turn key system or section part.
5. Can improve and rebuild old alcohol(ethanol) production line.
You can choose single distill tower to save money, also can choose 5 distill column to get good quality alcohol(ethanol).
DDGS; Distillers Dried Grains with Solubles.
We make many kinds alcohol equipments. Medical ethanol ,fuel ethanol and DDGS high protein feed Complete equipment ,medical ethanol in China, being regarded as national high-tech enterprise, star enterprise, standing commissioner of the National Alcohol Association, national demonstration unit of both quality and credibility assurance, national enterprise in designing and manufacturing class-I, class-II, class-III pressure vessel. We are capable to design, manufacture, install and adjust 1500t-500000t alcohol complete equipment on alcohol producing equipment and DDGS complete equipment, winning the National Science & Technology Progress Award many times. We are the first choice of clients at home and abroad. Material of alcohol equipment is corn, tapioca, potato, and other amyloid plants; Sirup, sugarcane, sugary jowar. We can also design for you according to your requirements.
We have a lot of commercial partners in Europe, America and Southeast Asia because of our advanced technology and reliability and reasonable cost
Alcohol equipment, ethanol equipment, fuel ethanol equipment, dehydration alcohol ethanol equipment
Distillation columns
* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries
Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
Ritver Powder Coating is a Italian product manufactured in Dubai UAE for Africa and Asia markets. Powder coating is categorized in:
Class 1,2 and 3 (for metal intrusions- aluminium, cast iron and steel)
Class 1 POLYESTER : Standard Powder Coating with upto 150 color codes as per RAL systems with a warranty of up to 20 years
Class 2 EPOXY: Super Durable (for exterior and interior) for up to 45 RAL color shades
Class 3 EPOXY-POLYESTER:Hyper Durable (for high end structures to protect from UV), Recommended for high rise structures, aviation and metro- locomotive industries
Available in Full Gloss: 90/Gloss: 77/Semi Gloss: 35/Matt: 25/Dead Matt:15% in soft textured, standard texture and coarse finishes
Product is available in 20kg packing
We are offering 11 brand-new, unused units of the MOBA Mopack 100 egg farmpacker, available for immediate sale and ready for deployment. Designed for high-efficiency egg packing, each unit offers a capacity of 36,000 eggs per hour (100 cases/hour) and features MOBA's signature vertical carousel system for individual egg handling ensuring continuous operation and minimal breakage. Built with robust stainless-steel construction and food-grade plastic components, the Mopack 100 is engineered for durability, hygiene, and ease of maintenance. Each machine measures approximately 4712 mm (L) 2667 mm (W) and operates on 200-230V single-phase or 380-430V three-phase power at 50/60 Hz, with a consumption of 2.5 kVA (excluding optional tray stacker). These machines are compatible with standard 30-egg trays, support inkjet integration for egg printing, and offer optional tray stacker add-ons. Ideal for commercial egg farms seeking to automate their packing line with reliable, industry-standard equipment, these unused machines are in factory-fresh condition and stored with care, making them a valuable acquisition for any scale-up or expansion.
We are offering 11 brand-new, unused units of the MOBA Mopack 100 egg farmpacker, available for immediate sale and ready for deployment. Designed for high-efficiency egg packing, each unit offers a capacity of 36,000 eggs per hour (100 cases/hour) and features MOBA's signature vertical carousel system for individual egg handling ensuring continuous operation and minimal breakage. Built with robust stainless-steel construction and food-grade plastic components, the Mopack 100 is engineered for durability, hygiene, and ease of maintenance. Each machine measures approximately 4712 mm (L) 2667 mm (W) and operates on 200-230V single-phase or 380-430V three-phase power at 50/60 Hz, with a consumption of 2.5 kVA (excluding optional tray stacker). These machines are compatible with standard 30-egg trays, support inkjet integration for egg printing, and offer optional tray stacker add-ons. Ideal for commercial egg farms seeking to automate their packing line with reliable, industry-standard equipment, these unused machines are in factory-fresh condition and stored with care, making them a valuable acquisition for any scale-up or expansion.
