Road milling machine spare parts road planing bit Sy980
Hard welding material and special weld-processing technique can make the joint point between the tool shank and the alloy much more firm.
The 1.2mm thick snap ring, which is made of flexible steel of high quality, can bear the expansion force for a long time.
The washer with a diameter of 44mm which is made of firm elastic steel plate can reduce the abrasion to the apron.
This cutter is widely used for maintaining construction of top course including high-grade highway, municipal road, airport, public square and so on. The main construction object is asphalt mixture road surface, it is also used to the napping process of the cement concrete road surface. It applies to road renovation, pavement and repair, and also to mill the road and public square. It used to milling the ditch and dadoing the gutter.
A comprehensive range with 'Button', X and Cross with tungsten carbide tipped head configurations. Button Bit designs include; Standard, heavy duty, drop centre, ballistic, parabolic and retract and combination options. Available with all popular international thread forms such as R28, R32, R38, T38, T45, T51 which can be equipped with rock drilling machines such as Atlas Copco, Boart Longyear, Sandvick, Ingersoll-Rand, Furukawa and so on.
(1)thread: R22, R25, R28, R32, R35, R38, T38, T45, T51, ST58, T60
(2)diameter:42mm-127mm
(3)package: in wooden box or in carton.
(4)Supply ability:10000/month
(5)Delivery time :30days.
Advanced type of taper drill bits when compared with taper chisel bits and taper cross bits. With carbide buttons hot pressed on bits bodies, it has good drilling performance and life time. Usually used for hard or very hard rock formation.
Steel body, made by material 40Cr or 42CrMo, heat treatment with 40-44HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working.
For Areas Using:
Milling minerals
Cutting routes
Cutting in tunnels .
For Machines:
The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed
Specification+¬Such as C31HD, U765, U765HD, U85HD, U82 U84, U92, U94, U47, U47HD etc
Package+¬in carton
Supply ability:10000pcs/month
Delivery time:30days
Payment terms:T/T or L/C.
Taper drill rod is used for rock drilling, blasting holes and other drilling works in the quarries, coal mines, traffic and other contractions. It works with taper drill bits and has different length for various applications, our taper drill rods come in a variety of taper angles, generally, the light duty rock drill usually use 7 taper or smaller taper angle, the heavy duty rock drill mainly use 11f=12 taper angle. And the basic theory is that taper drill rods and taper drill bits must be in the same tapered degree. We provide tapered rods in a full range of shank configurations and steel hex diameters for hand-held pneumatic drilling needs.
1,1+Steel grade: 55SiMnMo++40SiMnCrNiMo, 95CrMo equivalent to SANDBAR 20 or C253,
2,Shank size: hex.22mmf-108mm , hex.22mmf-159mm, hex.22mmf-80mmhex.25mmf-108mm. hex.
3,Taper:6fp++7fp++11fp++12fp++etc
4,Length:0.5m-9m
5,Package: in wooden case or in bundles.
6,Supply ability:3000MT/month
7,Delivery time :30days
8,Payment terms:T/T or L/C.
Down the Hole Hammer
1. Designed specifically for drilling in holes where water is present.
2. Production rates in wet hole conditions will be optimized due to the innovative technology used to design these hammers.
3. The advanced design provides faster rock penetration using less air.
4. Hardened wear sleeves can be reversed or replaced giving the drill a new life.
Low pressure and high pressure hammers are available in our company.
,Diameter+¬85mm-555mm
2,DTH Hammer: 3f¬-12f¬
3,Splines:4-10
4,Package :in carton
5,Supply ability:2000pcs/month
6,Delivery time :30days
7,Payment terms:T/T or L/C.
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
It is the main industrial sterilization, antiseptic and anti-enzyme agent. It has outstanding inhibition of the growth of molds (fungi, bacteria), algae and other microorganisms in the organic medium, and solves a series of problems such as mold, fermentation, deterioration, demulsification, odor, etc. of organic products caused by the growth of microorganisms. Therefore, developed countries widely use BIT in latex products, water-soluble resins, coatings (latex paint), acrylics, and polymers. Polyamine products, photographic lotion, paper-making, ink, leather, lubricants and other products.
