Indicators
High speed square body fuses are available with the following
indicators.
Visual indicator
The indicator situated in one end plate is clearly visible as soon as
the fuse has operated. The minimum rated voltage for operating the
indicator is 20 V.
Type T indicator
The indicator is situated on one cover plate with a cover plate tag
to accommodate an auxiliary switch. The minimum rated voltage for
operating the indicator is 20 V. A special low rated voltage indicator
(1.5 V) is available on request.
Type K indicator
The indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of a microswitch. The rated operating voltage
of the indicator is 1.5 V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
Microswitches
High speed square body fuses with either Type T or K indicators
can be equipped with a microswitch for remote signaling of fuse
operation. All microswitches have one normally open (NO) and one
normally closed (NC) contact.
CH modular, IP20 finger-safe DIN-Rail holders for Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and
without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and
threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged
together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Wire range
75°C and 90°C Cu
18-4 AWG (0.8-21.1mm2)
Solid, stranded and fine stranded*
* See data sheet 10430 for application details.
Terminals
Single or dual conductors
Comb busbar
Terminal screws
Standard phil-slot
Optional hex head (order by adding -H suffix to the catalog
number, e.g., CHM1DU-H)
Torque
30 lb-in (3.4 Nâ?¢m) maximum
Flammability
UL 94V0, self-extinguishing
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
Description
The Littelfuse Class CC, CD and midget blocks offer
generous space savings and enhanced value. DIN-rail
mounting and universal mounting holes are available as
well as an indication feature on all Class CD fuse blocks.
Features/Benefits
Space-saving design
Universal mounting holes for easy replacement.
Indication offered on CD blocks.
One hand release from DIN rail optional.
Rejection feature that prevents the insertion of fuses
with lower interrupting rating or voltage ratings.
Clip design reduces resistance and heat .
Non DIN-rail fuse blocks have interlocking feature
allowing ganging for any number of poles.
Covers available for all amperages to enhance safety.
Specifications
Voltage Rating 600 Vac/dc
Ampere Ratings L600M Midget (10x38): 30 A
L600C Class CC: 30 A
LFC Class CD: 60 A
L600CM Class CC & Midget: 30 A
Dielectric strength 1200 V minimum
Materials Clip/terminals: Tin-plated copper alloy
Box lug: Copper
Screw & captive pressure plate: Zinc-plated steel
Base: Thermoplastic
UL94 V-0 flammability rating
Withstand Rating L60030C: 200kA
(SCCR) L60030M:10kA, 20kA or 100kA based on the
Midget fuse used
LFC600: 200kA
Approvals L600M: UL Recognized (File: E14721)
CSA Certified (File: LR7316)
L600C: UL Listed (File: E14721)
CSA Certified (File: LR7316)
LFC: UL Listed (File: E14721)
CSA Certified (File: LR7316)
L600CM: UL Recognized (File: E14721)
CSA Certified (File: LR7316)
Environmental RoHS Compliant, Lead (Pb) Free
Recommended Fuses
Class CC Blocks: CCMR, KLDR, KLKR
Class CM Block: Fuses same as CC & Midget Blocks
Class CD Blocks: CCMR
Midget Blocks: BLF, BLN, BLS, FLA, FLM, FLQ,
FLU, KLK, KLKD, KLQ
The Fuse in a plug is a safety device designed to protect the lead rather than the appliance. Buy Domestic plug Fuses in UK That are used in Variety of Electrical Household Appliances. Plugs for appliances rated between about 700 Watts and 3000 watts should be fitted with a 13-amp fuse. Order The Best Domestic Fuses from Kafton UK Cable Ties.
Fuse LV HRC RS32(NGTC1) 690V-100kA aR [250A]
Selection of advanced technology, absolutely first-class service quality, YOYIK over the years to the same faith. The main technical backbone are retired senior engineer, senior mechanic. Many of them have participated in the planning, production and installation of power stations such as Gezhouba, Ertan and Three Gorges, and provided high-quality equipment selection, construction planning, installation and dispensing of hundreds of hydropower stations and overhaul of thermal power plants. , After-sales service and other train services.
Yoyik can offer many spare parts for power plants as below:
#DF-Fuse LV HRC RS32(NGTC1) 690V-100kA aR [250A]-DF
Eddy Current Signal Converter CON021/915-060
Bolt electric heating rod ZJ-20-80
Expansion transducer TD-2 (0-35mm)
LVDT 0508.902T0102.AW021
Stator Cooling Water System Electric Heater HY-CYQ-2.4-380/3
precision level gauge GDRD53-P-F-A-FD-2-B-G-M-A-X
THERMOMETER WTY-1021
Travel sensor TD-1-300-10-01-01
HMI 6AV6647-0AE11-3AX0
Exciter GDI Card 3BHB006338R0001
Excitation card SWL3_STM32 WHLSZK
speed sensor CS-3F-L220-1
Oil and water alarm OWK-2
Eddy Current Sensor PR6422/003-120
Bolt electric heating rod ZJ-20-44
Vibration Monitoring & Protection Combined Device HY-6KVE7
LVDT Sensor HBTD-6-250
Surface thermal resistance SYRPT205205000
Eddy Current Sensor PR6422/105-110
Pull cord sensor XD-TA-E, RZ15G-W22-B3
Thermal Case Expansion TD-2-26
safety proximity sensor CON021/916-240
boiler pressure switch RC861CZ090HYMY935
Eddy Current Sensor PR6422/102-101
Generator Exciter Board PCA-6740L
Soft start JJR5000-350-380-C
Bolt electric heating rod ZJ-22-T
Level Switch 397001-N33519
PLUG-IN CONNECTOR ASSEMBLIES 230-1140
POSITIONER EPOS 1436
LP Control Valve Position Sensor 0-200mm
Diaphragm type differential pressure switch 604G11
three wire thermocouple WRNK-231TZ/K/550/5/0ï½?1200â??/M20*1.5
Sensor Unit 71107554
Eddy Current Sensor PR6423/002-041
speed sensor SZCB-01-A01-B090-C00-D05
Fuse LV HRC RS32(NGTC1) 690V-100kA aR [250A]
Application:Product use: ceramic fuse, products widely used in power supplies, switching power supply, adapter, charger, LED driver power supply, all kinds of household appliances. LED power supply recommended use, mainly for export to the United States, designed for industrial voltage 277V
The Product Sells Point:
Key Specifications/Special Features:
Product Description:
Product Name: High Voltage Fuses
Product Type: 31FB
fusing characteristics: fast-break
Product Package: Epoxy
body size: 4 * 11mm
Operating temperature: -55 ? - + 125 ?
Product Features: 1, small size: the smaller the size of the ease of use of the design and installation;
2, the outer layer of insulation: epoxy resin and other components to prevent short circuit caused by touch;
3, explosion-proof characteristics: high rugged ceramic tubes with epoxy-proof packaging can enhance the safety performance;
Application:Product use: ceramic fuse, products widely used in power supplies, switching power supply, adapter, charger, LED driver power supply, all kinds of household appliances. LED power supply recommended use, mainly for export to the United States, designed for industrial voltage 277V
The Product Sells Point:
Key Specifications/Special Features:
Product Description:
Product Name: High Voltage Fuses
Product Type: 31FB
fusing characteristics: fast-break
Product Package: Epoxy
body size: 4 * 11mm
Operating temperature: -55 ? - + 125 ?
Product Features: 1, small size: the smaller the size of the ease of use of the design and installation;
2, the outer layer of insulation: epoxy resin and other components to prevent short circuit caused by touch;
3, explosion-proof characteristics: high rugged ceramic tubes with epoxy-proof packaging can enhance the safety performance;
Application:Household appliances products; such as iron, hair dryer (hairdryer), ovenhair straightener, vacuum cleaners, heaters, fans, juicer, mixer, power, motors, printers, copiers, fax machines, HID ballasts, fluorescent lighting ballasts, transformers, chargers, battery packs, heating appliances, electric heaters, electric cookers, electric thermos, coffee maker, fan, fans, sewing machines, water heaters, power converters, power plugs and sockets, refrigerators, air conditioners, car air conditioners, instruments, equipment, and so do overheat protection.
The Product Sells Point:
Key Specifications/Special Features:
A, the design and operating principle of thermal fuse
Temperature fuse functional circuits to detect abnormal temperature and cut off. It can detect domestic or industrial heating temperature anomalies and electrical products quickly cu
t off the circuit can be achieved by preventing the effects of fire in unburned.
Temperature fuse wire type with axial and radial lead type two. Use thermal particles (organic matter).
Safety Certification: UL, CSA, VDE, BEBA, PSE, JET, CQC ... certificate, EU ROHS environmental directives
Second, the application: thermal fuse to prevent overheating of the following areas
