Output: Analogue or digital
Typical Linearity: 2.5% (absolute) 1.0% (independent linearity)
Typical Travel: 15mm electrical* / 18mm mechanical*
(*application dependent, adaptable to larger or smaller travel requirements)
Nominal Index Voltage : Programmable
Electrical Limit Maximum : 20 VDC
Supply Voltage : 4.5 - 5.5 VDC
Typical Current Draw : 12 mA (dependent on program conditions)
Maximum Response Time : 600 S
Durability :
Typical Vibration: 200 hrs.; 3 planes; 20 - 2000 Hz; 40G RMS;-40C -160C.
Typical Thermal Shock: 500 cycles, -40C and 160C; 15 sec. transition;
30 min. soak at each temperature
Typical Temperature Range: -40C > 160C
1 switching capability 10 w (max)
2 switching voltage 100 vdc (max)
3 switching current 0.5 amps (max)
4 contact resistance 1 ohms max
5 dielectric :
between terminals 200vdc for 1minute
between body & terminal 500vdc for 1minute
body & cable insulation 500vdc for 1minute
6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01
7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01
8 operating temperature 80 deg c max
9 surface temperature 5 deg c max @ ambient
10 ambient temperature -20 to +50 deg c
x denotes for high temperature (50 deg c )
11 IP rating ip 67.
12 sensor dimension 35x19x10 mm
13 Cable 2 core cable with shield
14 Approvals : CE & Atex.
Current Rating 5 A max.
Voltage Rating 250 VAC max.
Insulation Resistance 100 Mº+ min.
Dielectric strength AC 1000V for 60 sec.
Operating force 150g max.
Pre Travel 28mm max.
Protection IP 67.
Operating principle : Mechanical diaphragm.
Contact type : Normally open / Normally close.
Input voltage : 12 / 24V DC.
Operating temperature : -30C to +100C.
Connector : 2 Pin connector as per customers requirement.
Mounting : M10 X1 or as per customers requirement.
External load : 1.2W Lamp load.
End fitments : Down stream of Air filter.
Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.
Features & Benefits:
Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs
Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2
Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.
