Payment Terms:
full irrevocable confirmed l/c at sight
Destination:
Jordan
Looking for suppliers from:
Worldwide
Product Description
The buyer would like to receive quotations for -
Product Name: Ductile Iron Pipe
Specifications:
DUCTILE PIPES 450mm/18” 16 BAR QTY 72 METERS
DUCTILE COLAR SOCKET 450MM/18” 16 BAR QTY 6 EACH
DUCTILE FLANGE ADAPTER 450mm/18” 16 BAR QTY 6 EACH
DI pipes shall be centrifugally cast(C Class), with socket and spigot ends, EPDM rubber gaskets, according to EN545:2010
DI PIPES ACCORDING TO EN 545-2010
The joints of ductile iron (DI) pipes and fittings shall be TYTON type.
Outside protection coating:
Shall be of 400 g/m² metallic zinc Aluminum Alloy (85%+15%) plus epoxy finishing coat according to EN 545, applied also on socket inside, suitable for ground condition I and II and III. The external surface of the pipe spigot end at a minimum length of 250 mm shall have non toxic epoxy paint applied to a minimum dry film thickness of 100 microns. The internalsurface of the socket end shall be painted with a layer of zinc rich epoxy paint 150g/m²(zinc content not less than 85%° plus a layer of non toxic epoxy paint to aminimum dry film thickness of 100 microns.
Inside protection lining:
Cement mortar according to ISO 4179 – 1985.
2.2 Length of Pipes
Standard length for pipes is 6 meters for transport in bundles or 5.5 -5.8 meters for transport in open top containers.
2.3 Testing
The manufacturer shall demonstrate the conformity of his products with the standards by submitting the below performance tests specified in the standards:
• Compressive strength of the cement mortar lining.
• Leak tightness of flexible joints to positive internal pressure.
• Leak tightness of flexible joints to negative internal pressure.
• Leak tightness of flexible push-in joints to positive external pressure.
• Leak tightness of flexible joints to dynamic internal pressure.
• Leak tightness and mechanical resistance of flanged joints.
• Leak tightness and mechanical resistance of screwed and welded flanges.
The test should include:
• Dimensions Examination.
• Wall Thickness.
• External Diameter.
• Internal Diameter.
• Length
• Straightness of the pipes
• Ovality Test of the Pipes.
• Cement Lining Thickness.
• Tensile Test.
• Elongation test
• Hydrostatic pressure test.
• Hardness Test.
• Microstructure Examination supported by pictures
• thickness of external paint coating
• works leak tightness test for pipes and fittings
pipes and coating materials shall be certified for potable water use and shall contain
no ingredients that may migrate into water in amounts that are considered to be toxic or
otherwise, dangerous for health
Quantity Required : 100 Piece/Pieces
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : full irrevocable confirmed l/c at sight
Looking for suppliers from:
China, India, South Korea (Republic Of Korea)
Product Description
Please quote for the following wholesale product requirement -
Product Name: Ductile Iron Pipes Fittings And Valves
Specifications:
Ductile Iron Pipes
1400mm Dia Ductile Iron Pipes- 48m
1000mm Dia Ductile Iron Pipes-36m
900mm Dia Ductile Iron Pipes-12m
800mm Dia Ductile Iron Pipes-12m
600mm Dia Ductile Iron Pipes-36m
400mm Dia Ductile Iron Pipes-36m
350mm Dia Ductile Iron Pipes-54m
300mm Dia Ductile Iron Pipes-36m
250mm Dia Ductile Iron Pipes-60m
200mm Dia Ductile Iron Pipes-48m
100mm Dia Ductile Iron Pipes-140m
80mm Dia Ductile Iron Pipes-70m
50mm DIa Ductile Iron Pipes-40m
40mm Dia Ductile Iron Pipes-52m
Ductile Iron Bends 90 Degree
1400mm Dia Ductile Iron 90 Deg Bends-3 Nos
1000mm Dia Ductile Iron 90 Deg Bends-8 Nos
900mm Dia Ductile Iron 90 Deg Bends- 4Nos
800mm Dia Ductile Iron 90 Deg Bends – 3Nos
600mm Dia Ductile Iron 90 Deg Bends- 6Nos
350mm Dia Ductile Iron 90 Deg Bends- 8Nos
300mm Dia Ductile Iron 90 Deg Bends- 18Nos
250mm Dia Ductile Iron 90 Deg Bends- 24Nos
200mm Dia Ductile Iron 90 Deg Bends- 18Nos
100mm Dia Ductile Iron 90 Deg Bends- 26Nos
80mm Dia Ductile Iron 90 Deg Bends- 16Nos
50mm DIa Ductile Iron 90 Deg Bends- 12Nos
40mm Dia Ductile Iron 90 Deg Bends- 14Nos
Ductile Iron Tee
1400mm x 1400mm x 1400mm – 1 nos
1400mm x 1400mm x 800mm- 3 nos
1000mm x 1000mm x 1000mm- 1 Nos
1000mm x 1000mm x 600mm – 3 nos
100mm x 100mm x 100mm- 3 nos
40mm x 40mm x 40mm- 3nos
Ductile Iron Reducers
800mm x 400mm- 3 nos
600mm x 350mm – 3 nos
250mm x 150mm- 2 nos
200mm x 150mm- 8Nos
150mm x 100mm- 14Nos
100mm x 80mm- 8Nos
100mm x 40mm- 6Nos
Ductile Iron Flanges
1400mm Dia Ductile Iron Flange- 12Nos
1000mm Dia Ductile Iron Flange-16Nos
900mm Dia Ductile Iron Flange-8Nos
800mm Dia Ductile Iron Flange-12nos
600mm Dia Ductile Iron Flange-24Nos
400mm Dia Ductile Iron Flange-18Nos
350mm Dia Ductile Iron Flange-36Nos
300mm Dia Ductile Iron Flange-28Nos
250mm Dia Ductile Iron Flange-22Nos
200mm Dia Ductile Iron Flange-17Nos
100mm Dia Ductile Iron Flange-30Nos
80mm Dia Ductile Iron Flange-12Nos
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Dubai, United Arab Emirates
Payment Terms : L/C
Looking for suppliers from : China, India, South Korea (Republi
