The die furnace heat the die by heating wire and through circulation fan to maintain temperature uniformity , so fastest heating and temperature uniformity available. Besides, the furnace has the characteristics of good sealing performance, durable and easy operation.
Main technical parameter
Heating type: electricity type
Chamber temperature tolerance.
Main technical parameter
Gas utilized: natural gas, oil, water gas
Material: base rack, chain rack and chain runway adopted 12# standard channel steel. Furnace frame adopted 40*60 square pipes. Base plate adopted 3mm hot plate. side plate adopted 2mm cold plate.
Fireproof and heat preservation material: bottom brick is adopted with light soaking brick; surface brick and furnace hearth are adopted with aluminum fireproof brick; soaking cotton is adopted with fiber silicon cotton.
Suitable for small or middle-sized extrusion press. It depends mainly on the friction of belt and pulley for the deliver of aluminum profile. It can especially avoid the profile to be secondary bumps & scratches &scraped & distorted. With the characteristics of advanced technology, rational structure, beautiful appearance, steady, easy operation, is quiet in working.
Rotor diameter 3.2m noise test report
Blades quantity 3 pcs wind speed(m/s) noise(db)
Direction always downwind 3 24.6
Blades material glass fiber 4 24.8
Rated output 2000w 5 29.5
Maximum output 2500w 6 35.2
Initial voltage 96v 7 40.7
Initial wind speed(m/s) 3m/s 8 48.2
Nominal wind speed(m/s) 9m/s 9 52.6
Stormstand up to 35m/s 10 61.8
Wind protection autofurl 11 65.8
Rotor speed 280 r/min 12 70.5
Wind turbine type pmg (on constant magnets) remark
1.Noise report (tested by hand held sound level meter)
2.Test position at 12m away from generator (average value of 3 point-rear, left, right).
3.The noise value includes wind noise.
Working temperature from -40 to +60 c
Total capacity(one year) 5000kwh
Charge control automatic intelligent control
Recommended battery 12v150ah 8pc
Batteries full charged about 10 hours
Weight(kg) 55kgs (without tower)
Horizontal single movement aluminum extrusion press
Model: horizontal, four tie rods, hydraulic system, plc for electric power, semi-automatic control, easily operated, automatic holding die slide and automatic charging into container.
Features: this extrusion press is equipped with variable piston pump which can automatically control the output of pump according to the change of pressure. Electric power consumption is low and oil temperature does not easily rise up. Speed control is also available. Thus, it can have best operating efficiency.
Supplier: Aluminum extrusion profile, plastic products factory, we are a manufacturer specializing in the production of supermarket hardware tools also make molds, plastic injection processing. extruded aluminum products is our conventional extrusion material including aluminium windows and aluminum doors, doors, door hinges, door locks, door hardware, extrusion processing of aluminum alloy profiles;and high precision processing of aluminum alloy extrusion products. Services: Import and export
