XX- line of portable X-ray units is designed to the principle of low cost and high reliability, which is characteristic in convenient to carry, easy to operate, and highly automated. X-ray tube and HT coil are all produced by DANDONG NDT which guarantees system consistency.
Weight is further reduced with the use of SF6 insulation. Forced cooling fan guarantee the longevity of X-ray tube, which makes the product suitable for field and highly above work.
K03/K05 control unit is microprocessor controlled with module of controlled silicon voltage adjustment and frequency conversion. The functions of fully automatic warm-up program, fault display, over voltage and mis-start protection, the stability and service life are much improved.
The main products of our company are composed of X -ray tube, portable X -ray flaw detection machine, mobile X -ray flaw detection machine, X -ray orientation equipment and X -ray diffraction equipment, among which X -ray instrument amounts to 43 varieties, and X -ray tube amounts to 67 varieties.
The X-ray tube products including 10kv-350kv each kind of specification, specially uses in the fluorescence spectroscope's X- ray tube, in the mobile flaw detection machine the ceramic X- ray tube achieving the international advanced level. We have produced the 160kv, 2mA X- ray tube used in security check for more than 20 years, product best-selling the world.
1. When adding up voltage, total current is less than 2a and total power is 500w;
2. The current and voltage of x-ray tubes are fixed in three groups, they are:
X exposure voltag (kvp) 60 65 70
X-ray current (ma) 0.5 0.85 1.10
3. When adding up voltage, total current is less than 2a and total power is 500w
4. Drain current and earth resistance are in accordant with the stipulates in gb9706.1
5. The three groups of voltage (60kv, 65kv, 70kv) are adjustable.
6. Wireless remote control in any angles within 10 meters part form the control box
7. The parameter of x-ray generator (bulb tube head) the parameter of x-ray tubes
A focus index: 0.3*0.3mm2
B. The voltage of the-highest-voltage generator: 90kv
C. The highest inverse peak voltage: 90kv
D. Filament characteristic: vf=5v+0.5v, f=3a
E. Target surface obliquity: 12
F. The cooling manner of bulb tube head: oil immersion
The parameter of x-ray generator (bulb tube head):
A. Focus-skin distance: 200mm
B.The thickness of filter-ray film: more than 1.5mmal
C.The leakage rate of x-ray: no more than 0.002mgy/h (no. 29.204.3 in gb9706.12 prescript that the leakage rate of x-ray is no more than 0.25mgy/h)
D. The manner of limiting beam: using planigraphic device
PLX101 Series
High Frequency Mobile X-ray Equipment
PLX101/101A/101C
Rocker safety lock design, make your operate much safer
High quality x-ray monoblock assures more details, less dose
Symmetrical adjustable collimator for accurate positioning and better exposure protection
Aviation aluminum connectors, connection reliable, more safety
Advanced dislocation braking system, flexible movement, flexible braking
Multifunctional cassette storage box design
Features
Our high frequency technology assures the best image in every operating condition
Along with reduced patient dose and extended x-ray tube life time
The generator provide the right amount of penetration, reducing exposure times and retakes.
The parameter can be adjusted by the kV and mAs. Multiple security protect function such as over-voltage, over-current.
50 preset exposure programs allow extensive possibilities to optimize the exposure and processing parameters according to your preferences.
Fault automatic protection setting and fault alarming display
Parameters are automatically storage when power cut off.
Adopt rotating beam limiting device to adjust the X-ray field and angle freely.
Adopt manual controller and remote controller to do exposure.
Optional: PLXF152 mobile table for high frequency mobile X-ray equipment.
PLX101D is equipped with built-in battery, can take 200 films when full charged.
Rocker can move up and down, automatically balance
High quality X-ray monoblock can rotate in ±90
Options
PLXF152 Mobile Bed For Mobile X-ray Machine
Size: 2000 X 700X 500mm
Range of grid box movement 1210mm
Size of grid box: 430X 430(17 X 17)
Bucky Stand
Height: 1770mm
Vertical movement range: 470-1470mm
Grid density: 103L/inch
Grid radio: 10:1
Focus distance: 150cm
Maximum grid box: 17 X 17
brand of surgical x-ray equipment PLX101D
mobile x ray machine for sale
price of x ray machine
mobile x ray machine specifications
Power Output 5.0KW
x ray machine Main Inverter frequency 40 KHz
X-ray Tube of radiography machine fixed anode focus: 1.5 (X-ray tube for high frequency)
Power Supply 220V±10% 50Hz Inner-resistance
Operation Method Wire/wireless control
Our products are with german brand NAGO and german technology. We provide X-ray tubes for medical ,industry and inspection systems . The tubes can replace Siemens , Philips , Varian ,Toshiba ,IAE and other brand tubes . We provide also X-ray tube accessories like glassbulb, target , rotor and so on. Offering mechanical parts processing work according to customer's drawing and requirements .
