Specifity, stability and reliable, low insertion loss, high return loss
Single mode and multi-mode(50/125m, 62.5/125m) cable jumper/pigtails are available
Single and duplex are available
Cable diameter:0.9mm, 2mm, 3mm.
Type: ST, SC, FC, LC, SC/APC, MTRJ
Boot O.D: 0.9mm/2.0mm/3.0mm
Applications: gigabit ethernet, active interface device, test equipment, wide area network, data processing network, optical switch interframe connection , telecommunication network , premise installations , industrial etc
Availability
1.The Connectors can be supplied as a pre-assembled one-piece or as a connector Kits
2.Clips are available for duplex connectors
Specifications
SinglemodeMultimode
Insertion Loss<0.20dB<0.30dB
Return Loss>=45dB for PC Polishing
>=55dB for UPC Polishing
>=65dB for APC Polishing
Durability<0.1dB typical change,
500 matings<0.1dB typical change,
500 matings
Operating Temperature-40 to +75-40 to +75
Storage Temperature-40 to +75-40 to +75
Ferrule hole sizes125.3+1/-0um,
Concentricity 0.7um maximum125.5um, concentricity 2um maximum
125.5+1/-0um,
Concentricity 0.7um maximum127um, concentricity 2um maximum
126.0+1/-0um,
Concentricity 0.7um maximum128um, concentricity 2um maximum
Laser-Optimized Multimode Fiber Aqua Cord features 50/125-micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs, and routers as well as higher end networking equipment. This LC-LC patch cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration. Each Duplex 50/125 (OM3) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability and is backed by our lifetime warranty.
Polarization Beam Splitter is designed to divide one beam of any polarization into the two beams of the polarization vertical to each. The optical route is from one fiber to two fiber.
Company introduction:
a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc.
Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers.
High power Optical Fiber Components:
-Optical Fiber Isolator, up to 100W;
-Free Space Isolator, up to 100W;
-Optical Circulator, up to 30W;
-Pump Laser Protector;
-Band Pass Filter;
-Nx1 Pump Combiner;
-Cladding Power Stripper;
-Mode Field Adapter;
-(N+1)x1 Pump & Signal Combiner, 200W/port;
This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+, and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration.
Descriptions
The FC fiber optic patch cord is with FC fiber optic connector. It is one of the most widely used types of fiber optic patch cord. The FC fiber optic patch cord can be simplex or duplex (zip cord), single mode or multimode. For single mode FC fiber optic patch cord , there are PC polished ones and APC polished ones, for multi mode FC fiber optic patch cord, they are all PC polished ones. FC fiber optic patch cord features low cost, simplicity as well as good durability; the ceramic ferrules of FC fiber optic patch cord make them accurate alignment. The fiber optic patch cords are with a locking tab on the cable termination; they are push and pull type fiber optic connectors. Generally FC fiber optic patch cord life cycle is with about one thousand times mating cycle.
Features
PC, UPC, APC Multi skive project
High return loss
Low insertion loss
High reliability and stability
Applications
Telecommunication
Testing equipment
Long-haul telecommunication
LAN system
CATV systems
Specifications
Types Single mode Multi mode
Diameter (mm) 0.9mm, 2.0mm or 3.0mm Optional
Fiber cable Simplex or Duplex available
Operating Wavelength 1310, 1550nm
Insertion Loss (dB) 0.2 (UPC)
0.3 (APC) 0.3 (UPC)
Return Loss (dB) 55 (UPC)
65 (APC) 35 (UPC)
Exchangeability 0.2 dB
Repeatability 0.2 dB
Operating Temperature -40 to +75
Storage Temperature -40 to +85
