Nc hydraulic press brake has a facility to program the various jobs with complex bending sequence.
The numeric control is used for two axis control ram axis y & back gauge axis x. The program gives facility to bend different bending degrees, different back gauge positions & different open positions. This helps to produce complex bending job in single setting as well the repeatable production at any point of time.
The back gauge consist of flip-top fingers, ball screw & linear bearing along with drive
Robust, sturdy structure made of ultrasonically tested steel plate of is 262 standard.
The combination of world class dedicated controller with highly precise proportional hydraulics to control the ram movement. High quality linear encoder to synchronize the cylinder and hardened & grounded tooling gives the repetitive accuracy in the beam stopping to ¦0.01 mm.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
We offer a wide plethora of Zinc in many forms including LME registered
and non registered Special High Grade Ingots and Jumbos, cathodes,
dust, foil, granules, powder, pieces, anodize activated powder, shot,
and a mossy form.
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is
malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air
at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc
on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
We are able to supply Tin in many forms including LME registered and
non registered, ingots, slabs, bars, foil, granules, powder, anodized
activated powder, shot, wire, sticks, ingots, and “mossy tin”.
Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline
structure. The element has two colours, with a cubic structure which changes at
allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is
cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This
change is affected by impurities such as Aluminium and Zinc, and can be prevented
by small additions of Antimony or Bismuth.
We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol
CNC cutting machine for cutting soft materials like fabric, and leather, etc., automatic oscillating knife cutting machine, Intelligent CNC, no need knife dies, reducing costs and increasing efficiency.
