Yueqing Solomon Intelligent Electric Co., Ltd.

DR-120-24

1.Low price and high reliability
2.105íµ output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave
Model
Specification DR-120-12 DR-120-24 DR-120-48
DC output voltage 12V 24V 48V
Output voltage error (Note2) í+2% í+1% í+1%
Rated output current 10A 5A 2.5A
Output current rage 0-10A 0-5A 0-2.5A
Wave and noise(Note3) 80mVp-p 80mVp-p 100mVp-p
Inlet stability(Note4) í+0.5% í+0.5% í+0.5%
Load stability (Note5) í+1% í+1% í+1%
DC output power 120W 120W 120W
Efficiency 80% 84% 85%
Adjustable range for DC voltage 10.8-13.2V 21.6-26.4V 43.2-52.8V
AC input voltage range 88í½132VAC/176-264 47í½63HZ;248í½370VDC
Input current 3.3A/115V 2A/230V
AC impulse current Cold-start current 30A/115V 60A/230V
Leakage current <3.5mA/240VAC
Overload protection 105%í½150% Typeú¦current limiting; Reset: auto recovery
Over-voltage protection 15-16V 29-33V 58-62V
High-temperature protection 85íµí+5íµ(TSW1) 90íµí+5íµ(TSW1) 90íµí+5íµ(TSW1)
Temperature coefficient í+0.03%íµ(0í½50íµ)
Setup rise hold up time 500ms,70ms,30ms/230VAC
Vibration 10í½500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage Input and output intervalú¦3KVACú¼Input and enclosureú¦1.5KVACú¼Output and enclosureú¦0.5KVAC
Isolation resistance Input and output intervalú¼Input and enclosureú¼Output and enclosureú¦500VAC/100M Ohms
Working temperature and humidity -10íµí½+50íµú¼20%í½90%RH
Store temperature and humidity -20íµí½+85íµ,10%í½95RH
Overall dimension 65.5*125.2*100mm
Weight 0.8Kgs 20PCS/16KG/1.1CUFT
Safety standards Meet UL1012
EMC standards Meet FCC Part 15J Conduction class B
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25íµ 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingí¦A12í¦double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2íó3íó11must be knocked down.

DR-120-24

1.Low price and high reliability
2.105íµ output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave
Model
Specification DR-120-12 DR-120-24 DR-120-48
DC output voltage 12V 24V 48V
Output voltage error (Note2) 2% 1%
Rated output current 10A 5A 2.5A
Output current rage 0-10A 0-5A 0-2.5A
Wave and noise(Note3) 80mVp-p 80mVp-p 100mVp-p
Inlet stability(Note4) í+0.5% í+0.5% í+0.5%
Load stability (Note5) í+1% í+1% í+1%
DC output power 120W 120W 120W
Efficiency 80% 84% 85%
Adjustable range for DC voltage 10.8-13.2V 21.6-26.4V 43.2-52.8V
AC input voltage range 88í½132VAC/176-264 47í½63HZ;248í½370VDC
Input current 3.3A/115V 2A/230V
AC impulse current Cold-start current 30A/115V 60A/230V
Leakage current <3.5mA/240VAC
Overload protection 105%í½150% Typeú¦current limiting; Reset: auto recovery
Over-voltage protection 15-16V 29-33V 58-62V
High-temperature protection 85íµí+5íµ(TSW1) 90íµí+5íµ(TSW1) 90íµí+5íµ(TSW1)
Temperature coefficient í+0.03%íµ(0í½50íµ)
Setup rise hold up time 500ms,70ms,30ms/230VAC
Vibration 10í½500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage Input and output intervalú¦3KVACú¼Input and enclosureú¦1.5KVACú¼Output and enclosureú¦0.5KVAC
Isolation resistance Input and output intervalú¼Input and enclosureú¼Output and enclosureú¦500VAC/100M Ohms
Working temperature and humidity -10íµí½+50íµú¼20%í½90%RH
Store temperature and humidity -20íµí½+85íµ,10%í½95RH
Overall dimension 65.5*125.2*100mm
Weight 0.8Kgs 20PCS/16KG/1.1CUFT
Safety standards Meet UL1012
EMC standards Meet FCC Part 15J Conduction class B
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25íµ 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingí¦A12í¦double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2íó3íó11must be knocked down.

Switching power supply

Switching mode power supply (smps) s-200 series (single)
Low price and high reliability
105 output capacitor
Ac input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the ac input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with emi filter, minimum wave.
1) switching power supply (smps) output:
Dc voltage/rated current:5v/40a or12v/16.5a or15v/13.3a or24v/8.5a or27v/7.4a
2) switching power supply (smps) input:
Voltage range: 85 ~ 132vac / 170 ~ 264vac selected by switch 248 ~ 370vdc
Ac input frequency: 47 - 63hz
Ac current:4.2a/115vac 2.2a/230vac
Inrush current (max.):cold start 30a/115vac 60a/230vac
Leakage current: <0.5ma/240vac
3) switching power supply(smps) protection:
Overload 105 ~ 150% rated output power
Protection type : shut down o/p voltage, re-power on to recover.
4) switching power supply (smps) environment:
Working temp.: -10 ~ +60f¦ (refer to output load derating curve)
Wording humidity: 20 ~ 90% rh non-condensing
Vibration: 10 ~ 500hz, 2g 10min./1cycle, 60min. Each along x, y, z axes
5) switching power supply (smps) dimension: 150*140*86mm (l*w*h)
6) remark: switching power supply (smps) special specifications can be made to order

Switching Mode Power Supply (SMPS) S-60 Series (Single)
Low price and high reliability
105f¦ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.

1) Switching Power Supply (SMPS) Output:
Dc voltage/Rated current:5V/12A or12V/5A or15V/4Aor 24V/2.5A

2) Switching Power Supply (SMPS) Input:
Voltage range: 85 ~ 264VAC 120 ~ 370VDC
AC input frequency: 47 - 63Hz
AC current: 2A/115VAC 1A/230VAC
Inrush current (max.):cold start 30A/115VAC 60A/230VAC
Leakage current: <3.5mA/240VAC

3) Switching Power Supply(SMPS) Protection:
Overload 105 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.

4) Switching Power Supply (SMPS) Environment:
Working temp.: -10 ~ +60f¦ (Refer to output load derating curve)
Wording humidity: 20 ~ 90% RH non-condensing
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

5) Switching Power Supply (SMPS) Dimension: 158*97*38mm (L*W*H)

6) Remark: Switching Power Supply (SMPS) special specifications can be made to order

If you want to know more information about our items please visit our website.

Switching power supply

Switching Mode Power Supply (SMPS) S-40 Series (Single)
Low price and high reliability
105 output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
1) Switching Power Supply (SMPS) Output:
Dc voltage/Rated current:5V/8A or12V/3.5A or15V/2.8Aor 24V/1.8A
2) Switching Power Supply (SMPS) Input:
Voltage range: 85 ~ 264VAC 120 ~ 370VDC
AC input frequency: 47 - 63Hz
AC current: 1.2A/115VAC 0.6A/230VAC
Inrush current (max.):cold start 15A/115VAC 30A/230VAC
Leakage current: <1mA/240VAC
3) Switching Power Supply(SMPS) Protection:
Overload 105 ~ 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
4) Switching Power Supply (SMPS) Environment:
Working temp.: -10 ~ +60f¦ (Refer to output load derating curve)
Wording humidity: 20 ~ 90% RH non-condensing
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
5) Switching Power Supply (SMPS) Dimension: 128*98*38mm (L*W*H)
6) Remark: Switching Power Supply (SMPS) special specifications can be made to order

Main specifications:

Switch Type: AC->DC

Power supply range: 85-132VAC/170-264VAC

Output DC voltage: 5-48V DC

DC output power range: 5-1500W.

For more information please be free to contact us for detailed PDF datasheets.

Standard package.

SA-5016
Input Voltage: 230VAC/50Hz10%
Output Voltage: 16VDC
Output Current: 50ADC
Protection Mode: Over-temperature
Dimensions: 88x134x75m

SA-2016
Input Voltage: 230VAC/50Hz,±10%
Output Voltage: 16VDC
Output Current: 25ADC
Protection Mode: Over-temperature
Dimensions: 67x138x90mm

Specifics:
Load Regulation: 10%
Operation Time: 30min(continuous)
Input Voltage: 230Vac/117Vac/50-60Hz
Output Voltage: 13.8VDC
Output Current: 25-27A
Ripple Voltage:

Specifics:
Load Regulation: 10%
Operation Time: 30min(continuous)
Input Voltage: 230Vac/117Vac/50-60Hz
Output Voltage: 13.8VDC
Output Current: 3-5A
Ripple Voltage: