With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km).
Details about one modle of atop's sfp transceiver here.
Product features
Upto 1.25gb/s duplex data links
Hot-pluggable sfp footprint
1310nm fabry-perot laser transmitter
Duplex lc connector
Rohs compliant and lead free
Upto 20 km on 9/125
Metal enclosure for lower emi
Single 3.3v power supply
Low power dissipation <600mw
Commercial operating temperature range: 0 centigrade to 70 centigrade
Ddm is also available
Cwdm is also available
General
Atop's ap-s31121-3cxl20 small form factor pluggable (sfp) transceivers are compatible with the small form factor pluggable multi-sourcing agreement (msa). They simultaneously comply with gigabit ethernet as specified in ieee std 802.3 and 1x fibre channel as defined in fc-pi-2 rev. 10.0 .They are rohs compliant and lead-free.
With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here.
Product features
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Uncooled DFB laser transmitter in 8 possible CWDM wavelengths
Duplex LC connector
RoHS compliant and Lead Free
Up to 80 km on 9/125
Metal enclosure for lower EMI
Single 3.3V power supply
Low power dissipation <600mW
Commercial operating temperature range: 0centigrade to 70 centigrade
General
ATOP's AP-SCxx125-3CxLxx CWDM Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free.
Compliant with iec 60825-1 class 1/cdrhclass i laser eye safe
Rohs compliant products available
Applications:
Switch to switch interface
Switched backplane applications
Router/server interface
Other optical transmission systems
Description:
Atop ag-5524-bz8 transceiver is a high performance, cost effective module supporting dual data-rate of 1.25gbps/1.0625gbps and 80km transmission distance on smf. It is fully compatible with gigabit interface converter (gbic) specification (sff-8053), rev5.5. It can be inserted in or removed from host chassis without shutting power of the host system. It uses 1550 nm dfb laser for lr-2 applications, cwdm is also available.
Standards:
Compatible with gbic specification (sff-8053), rev 5.5
Compatible with ieee 802.3z
Compatible with ansi specifications for fibre channel
Compatible with fda 21 cfr 1040.10 and 1040.11, class
Tx-1310/rx-1490 nm single-mode bi-directional
Sfp simplex connector
155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet
Features:
Compliant with sonet/sdh standard
Compliant with fast ethernet standard
Industry standard small form pluggable (sfp)
Package:
Simplex lc connector
Differential lvpecl inputs and outputs
Single power supply 3.3v
Ttl signal detect indicator
Hot pluggable
Class 1 laser product complies with en 60825-1
Product features
Hot-pluagable gbic footprint
Extended case temperature range (0ípc to +85ípc )
Fully metallic enclosure for low emi
Low power dissipation (1.05 w typical)
Compact rj-45 connector assembly
Access to physical layer ic via 2-wire serial bus
1000 base-t operation in host systems with sgmii interface
Description:
Ap-gt1 1000base-t copper gbic transceivers are based on the gbic multi source aareement (msa). They are compatible with the gigabit ethernet and 1000base-t standards as specified in ieee std 802.32. The 1000base-t physical layer ic (phy) can be accessed via i2c, allowing access to all phy settings and features. The ap-gt1 uses the gbicí»s rx_los pin for link indication, and 1000base-x auto-negotiation should be disabled on the host system. The ap-gt1 is compatible with 1000base-x auto-negotiation, but does not have a link indication feature(rx_los is internally arounded).
Standards:
Compatible with gbic specification (sff-8053), rev 5.5compatible with ieee 802.3zcompatible with fda 21 cfr 1040.10 and 1040.11, class igeneral
Standard
Compliant with fiber channel 100-sm-lc-l
Industry standard small form pluggable (sfp)
Package
Simplex lc connector
Differential lvpecl inputs and outputs
Single power supply 3.3v
Ttl signal detect indicator
Hot pluggable
Class 1 laser product complies with en 60825-1
100% CISCO CWDM-SFP10G-1470 COMPATIBLE SFP TRANSCEIVER:Compatible for Cisco CWDM-SFP10G-1470, wavelength: 1470nm, the transmission distance up to 40km.
TECHNICAL SPECS: 10Gb/s data rate, duplex LC connector, cable type: SMF, working temperature: -5 ~ +70, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): -15.8.
EASY TO USE : Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Always keep the protective dust plug on the SFPâ??s optical bores until you are ready to make a connection. MiniGBIC module with DDM allows you to monitor the critical information, to find out some potential problems.
PREMIUM QUALITY: All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure the compatibility. Hot-swappable in Cisco routers and switches
OUTSTANDING SUPPORT: Backed by QSFPTEK Store for the life of the module itself, not your equipment; our modules won't void your switchs, with access to our tech support
