Pride International

Width of mixing blade: 135mm
Mixing bowl capacity: 5l
Speed of mixing blade: 140 5r/min.(low speed), 285 10r/min.(high speed)
Power supply: 220vac

The structure of kiln is simple, operate conveniently and reliably in life, less wearing parts, high rate of operation, it is the equipment to calcine high-grade cement in cement plant. Meanwhile, it is also widely used in metallurgical, chemical, construction and other industries. The rotary kiln produced by my company is with strong structure, operation smooth, high-quality products etc and can provide users with advanced high-performance vertical pre-heater, 5 degree cyclone pre-heater. Cement manufacturing consists of raw material grinding, blending, pre-calcining, clinker burning and cement grinding. In short, limestone and other materials containing calcium, silicon, aluminum and iron oxides are crushed and milled into a raw meal. This raw meal is blended and then heated in the pre-heating system to start the dissociation of calcium carbonate to oxide. The meal goes further into the kiln for heating and reaction between calcium oxide and other elements to form calcium silicates and aluminates at t a temperature up to 1450 centidegree: so called clinker burning. The cyclone system is attached to the rotary kiln by a riser duct. Secondary fuel is fed to the riser duct, the main fuel mixture, coal/petcock, fires the kiln. Reaction products leave the kiln as a nodular material called clinker. The clinker will be interground with gypsum and other materials to cement.

The equipments we use in this whole production line are vibrating feeder, jaw crusher, impact crusher, cement ball mill, lifer, preheating system, cement rotary kiln and packing machine and so on. All the necessary equipments in this line can be provided by our factory. We have cement production line experts to design specific solutions for your preference.

Model PMG series high efficient ball mill have been designed with the merits of open circuit grinding system and important renovations on traditional ball mills. Besides they have all the good advantages of open circuit mills, production capacity has been raised substantially, product becomes super fine and blains have been increased. It has provided a new type of grinding equipment for producing high strength grade cement with high output and super fineness.

Model PMG ball mill has adopted special integrate diaphragm and discharge grate to adjust material levels of every chamber so as to increase air ventilation and improve conditions inside mill; meanwhile it has also used new type of lining plate , regulated mill rotation speed, optimized design of bearings so as to increase its operational stability, use life and grinding efficiency.

After being put into practice, it is proved that its output has been increased about 20% and unit product power consumption has been reduced 10%-12% down under the conditions that other parameters have not been changed by comparison to other same sized ball mill. White being operated in open circuit, specific surface of cement could be reached up to 320cm2/kg performance of it is up to national advanced standard .It has been awarded as well-known brand product of china building material machinery industry, "well know brand products", " appointed manufacture of national building material machinery industry" and etc.






According to your needs.

Summary







1. Cf410s dispersant can significantly reduce cement slurry consistency, improve liquidity and rheolog-

Ical behavior of cement slurry



2. Cf410s dispersantis applicable in a wide temperature range and can be resistant to 356°f (180°c).



3. Cf410s dispersant has salt resistence and still has good performance in 5%-10% brine cement slurry.



4. Cf410s dispersant is suitable for dry mixed as well as water mixed, soluble in cold water.



5. Cf410s dispersant is compatible with cement and other additives well.









Special attentions







The performance of cf410s dispersant will be obviously decreased when dispersant cf410s is used in brine system, whose concentration is higher than that of the half saturated brine.







Applications





Temperature:lower than 356°f (180°c) (bhct).



Dosage: cf410s dispersant generally 0.2-2.0% (bwoc), recommend amount 0.5% (bwoc).

We design and manufacture devices for new type dry method cement production line, which capacity from 300t/d to 4000t/d clinker. And we can also assist the client in transacting purchaser`s credit or chinese government`s credit while exporting.
Rotary kiln is the main equipment for sintering cemnet clinker. The rotary kilns produced by our company can be divided into dry process and wet process. They can also be used for chemical industry, metallurgy industry and etc. Throught technical renovations, the rotary kiln sintering system equipment made by our company has adopted high measuring precession plunger pump, variable speed adjusted valve, contact graphite block air seal and other national advanced technologies. In order to raise up automation degree, indurstrial tv has been used at the kiln head for monitoring of kiln, analog fluorescent screen has been used for display of process flow; infrared scanning system has been adopted for sintering zone to directly reflect the burning conditions on the computer. With the use of these new technologies, it is directly in vision, convienent in operation and reliable in use. Therefore, the rmalcondition can be raised. Compared to been raised 3-5% up, production has been increased 5-10% and heat consumption has been reduced 15% down.
Rotary kiln belongs to building material equipment, which can be divided into cement kiln, metallurgy chemical kiln and lime kiln according to different materials.
Cement kiln is used for making of cement clinker and there are dry and wet methods to make cement. Metallurgy chemical kiln is used for magnetic roasting of iron ore and oxidizing roasting of chrome and nickel in the steel factory; baking high-alumina mine in the refractory material factory; baking chamotte and alumina in the aluminium factory and baking chrome ore and chrome powder in the chemical plant.
Lime kiln is used for baking active lime and dolomite in the steel factory and ferroalloy factory.

Vertical Cement Grinding Mill manufactured by China ZK Corp, for example double-swing type, underground type and step-started type jaw crusher, cone crusher, rotary crusher, single - section hammer crusher, tube coil grinding mill, grid type ball mill, bucket elevators, plate type, dissepiment and vibration feeder, screw sand mixer and heavy duty soil spreader for open-pit coal mining, are widely used for the industries of metallurgy, building construction, road construction, and chemical industry as well as silicate industry. China zhengkuang has provided various kinds of large and medium size complete sets of cement production equipments for more than 300 cement customers in domestic market. And engineering for equipment and technology, manufacturing, installation and commissioning as well as the supply of the spare parts and the training service can be offered by China ZK for customers. The gantry crane, the overhead traveling crane, tower crane, hoists, and other various kinds of crane equipment which have been designed and manufactured by China zhengkuang are widely used in the fields of handling of sluice gate for the hydro-power station, loading and unloading vehicle, outdoor handling and handling of the heavy duty components. China ZK has supplied large amount of super-high quality products for national water conservancy projects, the main products are: flood overflow arc-shaped gate and other hoisters as well as heavy duty plane sliding gate, heavy duty plane fixed wheel gate, drain gating and other super heavy water conservancy products.


Our products advantages:
1. High grinding efficiency and low power consumption.
2. Low metal consumption in unit product.
3.Bed grinding with low noise.
4. Negative pressure and low dust pollution.
5.Small floor space, compact layout, system equipment with light weight and low investment for civil construction

Product Description
The household small cement brick making machine is manually used, and it is relatively simple to control each movement by using a rod, and there is no requirement for the education and physical strength of the user;
It has a simple structure, a relatively small shape, and can be moved according to the site; it adopts 220v voltage, which has relatively low energy consumption and low cost of produced bricks.



Custom processing: Yes
Molding cycle: 5S
Transmission mode: 4506 (times/min)
Exciting frequency: 42
Maximum pressure: 4.6t
Whole machine weight: 560kg
Vibration frequency: 4600 (hz)
Working pressure: 10-22 (Mpa)
Dimensions: 5003 1603 2303
Installed capacity: 38
Forming pressure: 222
Main vibration form: hydraulic
Total power: 42kw
Alias: Mobile Cement Mortar Brick Making Machine
Uses: Cement bricks



Its parts are all mechanical parts, and there will be no damage during the production process, the failure rate is low, and the maintenance cost is reduced; the cost of the small household cement brick machine is relatively low, and it is a popular brick machine equipment.



Specific steps are as follows:
1. Pull open the upper mold of the household small cement brick machine;
2. Add materials to the mold of the small household cement brick making machine, pay attention to the material to be flat;
3. Hold the handle and push the upper mold; pull the small ring and pull it to the right;
4. Turn on the vibration and stop immediately when the left limit is in place;
5. Step on the balance bar below and pull the upper hand lever backwards;
6. Pull the small household cement brick machine out of the brick position, so that the bricks are produced.
Repeat the above steps cyclically to achieve continuous work. When the user can master and control the small brick making machine proficiently, its output will not be lower than other equipment.