We can supply Acetic Acid Industrial Grade and Food Grade.
Commodity:Acetic acid.
Other name: Glacial acetic acid
Molecular formula CH3COOH
CAS:64-19-7
EC No.200-580-7
Introduction:
Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition.
the most important characteristic of this way are as following:
mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way.
Specifications:
Apha color:<10
Freezing point: 16
Specific gravity:1.04
Acetid acid: 99.8%
Acetaldehyde: 0.004%
Formic acid: 0.06%
Iron: 0.00004%
Non-Volatile Matter: 0.003%
The heavy metal(As Pb counts): 0.00002%
Technical Specifications
Na2SiF6 99% min
Loss of weight on drying at 105 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.
Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.
Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.
Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying
Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.
Other Information: Anti-caking agent can be added at the request of customers.
Technical Specifications
Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
Specifications:
Appearance white free-flowing fine granule
Granule size 90% min between 0.15-0.85mm
NaCl 99 % min
Moisture 0.09% max
Ca & Mg 0.3% max
Water insolubles 0.1% max
Analysis items Standard Result
Appearance Yellow Crystalline Yellow Crystalline
Purity 99% min 99.2%
NaCN 0.01% min 0.001%
Moisture 1.5% max 0.3%
Water insoluble matter 0.02% max 0.01%
Sulphate 0.3% max 0.05%
Specifications:
Appearance white granule
Particle size 2-4mm
Purity 99% min
Nitrogen 15.5% min
Nitrate Nitrogen 14.1%-14.4%
Ammoniacal Nitrogen 1.1%-1.3%
Calcium 19% min
Moisture 0.8% max
Water insoluble matter 0.2% max
Nitric 0.05% max
Iron 0.005% max
PH 5.6-6.8
Appearance white granule
Particle size 2-4mm
Purity 99% min
Nitrogen 15.5% min
Nitrate Nitrogen 14.1%-14.4%
Ammoniacal Nitrogen 1.1%-1.3%
Calcium 19% min
Moisture 0.8% max
Water insoluble matter 0.2% max
Nitric 0.05% max
Iron 0.005% max
PH 5.6-6.8
Assay 99.0%min
PH Value 5-7
Heavy Metal 0.001%max
Calcium Oxide 23.4%min
Nitrogen 11.76%min
Sulphates 0.03%max
Chloride 0.005%max
Water Insolubles 0.01%max
Iron 0.003%max
