Supplier: Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines Buyer: Sunflower husk pellets;
lamb meat halal;
heating briquettes made from corn straw, rice straw, soy straw, and other organic waste; no charcoal briquettes
Machine Structure Horizontal
Color Grey
Voltage 440
Condition Used
Operating Mode Automatic
Power 3-6kw
Pressure High Pressure
Uses Automotive Industry, Steel Industry
Specialities High Performance
Port India port
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header.
These turbines can either be used for drive application (Sugar mill drives, Sugar fibrizor / Shredder drive, Pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand.
The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, This provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type.
The back pressure turbine with one controlled extraction point is possible, this extraction steam is also used to meet process steam demand at intermediate pressure when volume demand is high and pressure variations cannot be tolerated. These turbines are of extraction cum back pressure type.
Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header.
These turbines can either be used for drive application (sugar mill drives, sugar fibrizor / shredder drive, pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand.
The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, this provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type.
Supplier: 1.hospital beds, 2. heavy machinery used : (turbines all kinds off, generators,feed pumps, compressors, power plants, sugar plants,paper plant,steamboiler) 3.leather products : leather belts mens and womens,leather bags (travel,laptop,office), footwear for mens and womens.4. food products : ( rice, pulses, vegetables, spices, frozen food)
Steam Turbine 2100 KVA/1700 KW Back Pressure, Spilling Energy is world renowned with its modular compact axial design, integrated gear unit. The STS-C-A provides many years of continuous reliable operations for all applications. Inlet Pressure: 30-32 bar at 360C, Extracted Steam 3.5 bar at 200 C, 400 volts, 50 HZ, Year 2009, Control System Siemens PLC, Woodward DEIFF-PPM. Good Condition.
Fuji Electric's UPS and power solutions have the best product specifications with the latest technology. Fuji's products are available in the 72 VA to 2000 kVA range, for single modules. For higher ratings, these can be paralleled to deliver 12000 kVA. Fuji Electric's high efficiency UPS helps in reducing costs, weight, footprint and heat.
In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency.
A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW.
New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.
