Apollo V+ is a light based platform, which integrate lasers, intense pulse light and RF technology. A variety of application-specific handpieces are available, and more than 50 medical and aesthetic applications can be accomplished in one machine. Apollo V+ expands to your treatment needs and adapts to future applications.
Specifications:
Function Light Based Station
Handpiece Type Laserú¼IPLú¼IPL+RF
Repetition 0.5Hz
Operating Panel 8.4í¦ TFT Color touch screen
Skin protection Contact cooling, 0-5íµ
Dimension 410í-410í-1120mm3
Power 1500W
Weight 60Kg
The system applies the intense pulse light of broad spectrum onto the skin and penetrates skin through epidermis into dermis and is a high-selective absorption. Wherein, the Pyrogenation Theory, IPL energy is converted to thermal energy, and then to break the defect by heating surface.
Under the lights organism activation, the energy can stimulate the skin to regenerate new collagen to replace the damaged area, and then produce elastic fibers, consequently smooth skin. Thus reach the effects of diminish wrinkles and shrinking pores and skin tightening. Which can make you skin look better.
Light source Pulsed-xenon Lamp;
Energy density 6-35J/cm2;
Pulse width 5-30ms;
Light spot area 40í-8mm2; 40í-10mm2; 40í-16mm2;
Frequency 0.5Hz;
Display Color LC touch screen;
Cooling 0-5 íµ;
Dimension 560í-380í-460mm
Weight 25 Kg;
This treatment tip can vaporize the outermost layers of skin across a large surface by creating thousands of tiny, microscopic laser wounds, spaced in an even pattern across the skin, but leaving areas of healthy, untreated skin between them, the lower collagen layer of the dermis is stimulated to renew and repair. The surface of the skin now contains only microscopic surface wounds, instead of one large, red,
oozing burn. With the fractional treatment, the evidence of the ongoing healing and rebuilding process is more subtle, taking place deep in the dermis (where there are less pain receptors), leaving the protective epidermal covering much more intact.
After some recovery, the newly-generated skin is remarkably smoother and suppler.
Specification:
Light Source RF excited CO2 Laser
Wavelength 10.6ª¦m
Laser Power 12W
Pulse Width 0.1ms~1000ms,CW
Pilot beam 635nm, diode laser
Treatment area 30 í- 30mm2
Scanner mode Random
Standard pattern 5
Power 220V/5A, or 110V/10A
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Therapy Principle
Use the selective absorption characteristics and the high peak value bursting effects of the laser beam to reach the therapeutic purpose.This therapy instrument uses the most advanced Q-switch technology which makes the laser energy released at a very short time, then forms a high peak power giant pulse. The pigment granules will rapidly expansion and breakdown after absorbed such huge laser energy in short time, and the cell framework will be fully preserved and repaired quickly, This could treat the pigment tissue and almost has no destructive to the normal tissues
Product Characteristics
1. With dual-wavelength, terminal output power is tested by the SFDA testing center, the test result is 1064nm, 1000mJ;532nm, 500mJ. New international 7 articulated light conducting arm, only available on this system within china territory.
2. International purchasing components (Q switch and Polarizer is supplied by the international famous company)with good performance, the laser cavity mode selecting technique which makes the output laser beam has good light spot mode, light spot light intensity uniformly distributed and no hot light spot.
3. High purity green light with good therapy results.
4. Equipped with 7-joints light conducting arm, with energy and density automatically adjust rod. Easy to operate.
5. Encapsulated mechanical parts, with moistureproof, dust proof and deformation proof functions. Thus make sure the laser¡¯s life span longer, with less maintenance cost and better performance
6.Intelligent Cooling System , Excellent water cooling with intelligent alert system, more safety and longtime reliable working 7.8.0" TFT color touch screen and arm with diode laser beam guide, easy for operation
8. CE approval
Therapy Scope
1. The laser wavelength of 1064nm applied to black pigment and blue pigment lesions located on the dermis, such as black tattoo, blue tattoo and tattoo eye line, and so on. Long pulse in non Q switched mode-to improve chloasma, large pores visible, remove fine wrinkles, smooth white skin and enhance skin elasticity.
2. The laser length of 532 nm applied to the red, yellow and brown pigment lesions and other colors pigment lesions located on the skin surface and small area lesions therapy, such as pigmentation on the skin surface, freckles removal
Therapy Characteristics
Strong power output make big spot size treatment available, and with adjustable power supply, spot size adjustable too.
Pulse width less than 8ns, peak value can reach to hundreds omen, it is very effective when using to remove some deep-skin tattoo and Ota's nevus.
Q-switch:yag laser quick remove tattoo, Amazing treatment resultsQ7 adopts the active EO Q-switch module with unique resonator technology to get stable high energy laser output. The giant laser pulse has only 6-8ns pulse width which produced the mega-watts level high peak power!
With our special housing and hardware platform, Q7would be used in different application environment .It s very useful for some high humidity.
Q7 Q-switched mode could produce high peak power pulse laser with ¡°ns¡± level narrow pulse width. It's helpful for the pigment disintegration without any side-effect. All the action is in a single pulse rather than coming from multi-pulse which will lead to longer effect time on skin.
Main Technical Parameter
Laser type Nd: YAG laser (Electro-Optic Q-Switched output mode & long pulse 0.3ms output mode)
Laser wavelength1064nm/532nm
Optical beam transmission7 joint light conducting arm, transmission efficiency more than 75%
Light spot diameter with spot size adjustable therapy handpiece, light spot size adjustable from 1~7mm; with parallel light handpiece, spot diameter is 10mm
Laser aiming red semi-conductor aiming beam, wavelength 650~670nm
Laser pulse width 6~8ns
Single pulse energy 1000mJ(1064nm)/500mJ(532nm)
Repeat frequency 1~10Hz/1Hz step
Cooling systemclosed inside circulation water and constant temperature condition system
Dimension 500 900 910 mm3
Weight 85Kg
Power supply AC220/110V 10%,50/60Hz.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
