Features:
Complete kinds and specifications of valves for 4 big systems of hot blast stove, gas dust catcher, waste heat utilization and TRT, with high performance and reasonable price; valves can meet the requirements of blast furnace iron making technique such as high blast temperature 1450, blast pressure 0.8 MPA, utilization coefficient of blast furnace 3 4; six new international techniques were adopted for link lever shutoff butterfly valve, accurately on-off control, tightly sealing, long service life; ten new design techniques were adopted for hot blast valve, high temperature resistance, tightly sealing, and fault-free running, energy saving and water-saving; whole set of valves can guarantee the system stably running and low downtime odds, so it can reduce maintenance cost and economic loss.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
Chemical Name:4-Hydroxybenzoic acid
Trade Name:p-oxybenzoic acid
Molecular Formula:C7H6O3
Molecular Weight:138.12
CAS No.:99-96-7
Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone,
slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46
Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate
Specification
Item Specification
Polymer Grade Technical Grade
Appearance white crystal powder white crystal powder
Purity(on dry base) % 99.6 99.0
Melting Point 214-217 212-216
Odor odorless odorless
Solubility Clear and transparent clear and transparent
Loss on Drying % 0.20 0.50
Color(Pt-Co) 10 40
Ash % 0.02 0.15
Sulfate(SO42-) 0.01 0.05
Chloride(Cl-) % 0.005 0.02
Phe% 0.01 0.10
Salicylic Acid % 0.02 0.10
4-Hydroxyisophthalic Acid(HIPA) ppm 500 /
Insolubles in Metha ppm 50 /
Potassium(K+) ppm 5 /
Sodium (Na+) ppm 5 /
Iron (Fe) ppm 5 /
Ca2++Mg2+ppm 5 /
Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.
Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.
Packaging 50kg/100kg net in iron drums with double PVC bags
Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12
Supplier From
Busan,
South Korea (Republic Of Korea)
Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes
Since 36 Years, we JAY KHODIYAR INDUSTRIES are recognized as a trustworthy manufacturer, Exporter and supplier of cast iron product. In order to manufacture high-quality cast iron our professionals employ advanced machines and utilize quality tested material procured from the authentic vendors. In addition, our clients can avail these cast iron from us at a reasonable price.
According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.
