Name:marble adhesive
Main compostion: polyester resin
1)application: for filing, bonding and repairing marble/granite and other stones
2)colors : transparent, beige, white, black, red, grey etc.
3)capacity: 1l/4l/18l
4)cured in short time
5)can be operated in cold weather(-10c)
6)hard enough for polish
Iron drum packed in carton , carton packed in pallets
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin.
Resistant to UV
Resistant to alkalis and diluted acid solutions
Temperature resistance of cured adhesive is between -10 C and +100 C
Bonded surfaces are ready to be used after 2 hours
No color change, cracking or shrinkage during hardening period
Features:
1. This product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, and natural stone material
2. The indoor ceramic tile adhesive of light steel frame system board, like gypsum board and Eight board
3. Can be used on the low water absorption surface, like paste new ceramic tile above the old ones, and can be used on the firm painting surface
4. Excellent flexibility, can bear the bonding layer stretch that caused by temperature
5. Good anti-infiltration function
6. No need to wet the brick wall, effectively improve the efficiency.
Surface Treatment:
1. The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
2. For the new wall, when finding the leveling layer of cement mortar, plaster, should improve the leveling layer of mortar label the cohesive force of the wall, or mix MB-03 slurry additive. Specific reference, please look at the MB-03 introduction.
Operation Process:
1. Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2
2. Push the ceramic tile or heavy type ceramic tile above it
3. For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.
Cautions:
1. Never mix the dry slurry with water and use again
2. For the light wall board install large-scale decorative panels, like gypsum board and Eight board, confirm the wall firmness before operation
3.For the painting surface, make sure the initial bond strength and no flake
4.Operating under 5¡æ~40¡æ situation
5.Clean the surface by little wet sponge or cloth before it dry
6.Leave 1.5mm joint space between two tiles, suggesting MB-MC color anti-moldy gap filler.
Technical Reference:
Coverage area(amount).
using 3*3mm tooth scraper about 1.7kg/m2.
using 6*6mm tooth scraper about 3.0kg/m2.
using 10*10mm tooth scraper about 4.5kg/m2.
Technical reference:
1, Adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
2, Cool time: about 10min (cool time: the longest cool time that the adhesive can last )
3, Dry time: 24h (according to the weather)
4, Water resistance: excellent; non-toxic, prevent firethe smoother the surface, the less amount
5, When dry, anti-weak acid, anti-strong alkali and oil resistance
6, Cut degree: £¾1.2MPa (14days later).
Store Method:Store in cool and dry place, unopened product can be saved for one year.
Description:
Cetfix NSA is polymer modified cement based powder needs to be mixed with water for installation tiles over tile or smooth surface without removing old tiles or hacking the surface.
Advantages:
Excellent waterproofing characteristics
Ready to use, No curing required
Soaking of tiles not required
Reduces labour cost
Excellent adhesion, low shrinkage
Area of application:
Suitable for tile on tile application
Plastered wall
Bathrooms
Swimming pools
Kitchen Wash area
Super bond high performance epoxy adhesives for fixing marble, grenite, machinery & multi purpose usages. Fastest cureing & super strength is a additional benifit.
Tielo New Construction Tile Adhesive meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles). Easy application:- single component, ready to use mixture consisting of white cement, crystel and special additives. excellent adhesion and slip resistance.
Tielo Universal Gold Tile Adhesive is a cementations material in powder form composed of cement, chemicals & send, which only needs on site addition of water to make a mortar which is used for fixing tile over any cementation surface or on existing mosaic tiles without removing them, Tielo Universal Gold Tile Adhesive is also used for fixing tiles on difficult surface also.
