1.Top-fast Manufacturer for Membrane Switch ( 48H) & Graphic Overlay (24h)
2.Waterproof rating up to IP66
3.Free Graphic Design
4.Free DHL shipping & Free Paypal Fee
The first order is free, and only costs $30 for shipping!Samples only (within 5 pieces)
For new customer, there is an $20 New Welcome Coupons, that it can be directly used for the order on JRPanel.
Also, we are now Free DHL shipping & Free Paypal costs. which is a good activity for cutsomers.
PLC control cabinet is an electric cabinet with PLC as the core control unit, which can realize the control of fans, pumps, electric valves and other field equipment. According to the actual control scale, the automatic control of single cabinet can be realized, and the DCS control system can also be composed of multi cabinets through industrial Ethernet or industrial fieldbus network.
Timers : 512
Counters : 512
Function Blocks : 512
Operation temp.: 0�¡�£C-55�¡�£C
Storage :-40�¡�£C-70�¡�£C
Protection : IP20(Non-waterproof)
RTC accuracy : MAX �¡�?5S/day
RTC time intervals : 256
RTC Backup at 25 �¡�£C : 100 hours, Li-ion battery (optional)
Power-off retentivity : Yes
Dimensions : 72*90*68 (Unit, mm)
Certificate : CE
Installation : DIN rail or screw for installation
Expansion capacity : yes
Password protection : password protection
Communication interface : 1 RS232 port ( TTL interface) & 2 RS485 ports
Communication protocol : Modbus RTU/ASCII
It's optional for xLogic to be either slave or master in Modbus network.
AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for
normal flat charge. Maximum battery charger capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate
battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC
(resistive), 2.0 amps @ 30 VAC (resistive).
Electronic control panel for submersible pump for operation of 0.50 hp to 3 hp 1 phase and electrical coustomise panel up to 150 hp in 3 phase. Quality component used in panel for long lastings result and for customer satisfaction
Panels are available in diffrent lot size according to hp wise but 1 box contain min. 20 pcs. Weight n dimension are veries according to product specification
The 6001 analogue addressable control and indicating equipment forms the central part of a fire detection and alarm
System. The fully networkable 2-wire 6001 is compatible with numens addressable devices and can also be
Connected to non-addressable devices when used with addressable input modules.
Default configuration programming facilitates out-of-box installation and rapid commissioning. A powerful and versatile
Cause-and-effect pc-based programming tool enables rapid customization with software for sites that require
Special operating features.
The 6001 comes standard with features that allows flexibility and expandability.
Single loop or 2-loop options available
Single loop, expandable to 2-loops available
Networkable, up to 4 control panels
Up to 125 addressable devices per loop
Automatic device detection on start-up
Automatic device type-code verification
2 independently programmable non-addressable a/v alarm output circuits
2 programmable fire alarm relay outputs
Fault relay output
Backlit lcd display providing 4 rows of 40 characters
16 zone fire alarm led indicators
3000 event history log
1.Top-fast Manufacturer for Membrane Switch ( 48H) & Graphic Overlay (24h)
2.Waterproof rating up to IP66
3.Free Graphic Design
4.Free DHL shipping & Free Paypal Fee
Get a quote online: https://www.jrpanel.com/R
The first order is free, and only costs $30 for shipping!Samples only (within 5 pieces)
For new customer, there is an $20 New Welcome Coupons, that it can be directly used for the order on JRPanel.
Also, we are now Free DHL shipping & Free Paypal costs. which is a good activity for cutsomers.
AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for
normal flat charge. Maximum battery charger capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate
battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC
(resistive), 2.0 amps @ 30 VAC (resistive).
AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for
normal flat charge. Maximum battery charger capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate
battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
AC POWER: 220VAC, 50 Hz.
BATTERY: Sealed lead-acid batteries only. Maximum charging circuit: 27.6VDC @ 0.8 amp for
normal flat charge. Maximum battery charger capacity: 18AH battery.
NOTE: Two 10AH batteries can be housed in the cabinet. Larger batteries require a separate
battery box.
Total DC24V system power: 3.0 amps.
Maximum current per NAC: 1.25 amps.
Maximum battery charging capability: 18 AH.
Resettable four-wire smoke detector power output.
Non-resettable power output.
Integral Form-A Alarm, Trouble and Supervisory relays, rated at: 2.0 amps @ 30 VDC
(resistive), 2.0 amps @ 30 VAC (resistive).
